Linux-Renesas-SoC Archive on lore.kernel.org
 help / color / Atom feed
From: Jacopo Mondi <jacopo@jmondi.org>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	kieran.bingham+renesas@ideasonboard.com, airlied@linux.ie,
	daniel@ffwll.ch, koji.matsuoka.xm@renesas.com, muroya@ksk.co.jp,
	VenkataRajesh.Kalakodima@in.bosch.com,
	Harsha.ManjulaMallikarjun@in.bosch.com,
	linux-renesas-soc@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 14/20] drm: rcar-du: Add support for CMM
Date: Fri, 14 Jun 2019 10:54:31 +0200
Message-ID: <20190614085431.sbv2ivxouy4dsdse@uno.localdomain> (raw)
In-Reply-To: <20190607113540.GB7593@pendragon.ideasonboard.com>

[-- Attachment #1: Type: text/plain, Size: 12862 bytes --]

Hi Laurent,
   thanks for the review

On Fri, Jun 07, 2019 at 02:35:40PM +0300, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Thu, Jun 06, 2019 at 04:22:14PM +0200, Jacopo Mondi wrote:
> > Add a driver for the R-Car Display Unit Color Correction Module.
> >
> > Each DU output channel is provided with a CMM unit to perform image
> > enhancement and color correction.
>
> I would say "On most Gen3 SoCs, each DU ..." as V3* SoCs have no CMM.
>
> >
> > Add support for CMM through a driver that supports configuration of
> > the 1-dimensional LUT table. More advanced CMM feature could be
> > implemented on top of this basic one.
>
> s/could be/will be/ ? :-)
>

Hopefully :)

> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> >  drivers/gpu/drm/rcar-du/Kconfig    |   7 +
> >  drivers/gpu/drm/rcar-du/Makefile   |   1 +
> >  drivers/gpu/drm/rcar-du/rcar_cmm.c | 197 +++++++++++++++++++++++++++++
> >  drivers/gpu/drm/rcar-du/rcar_cmm.h |  38 ++++++
> >  4 files changed, 243 insertions(+)
> >  create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c
> >  create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h
> >
> > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
> > index 1529849e217e..539d232790d1 100644
> > --- a/drivers/gpu/drm/rcar-du/Kconfig
> > +++ b/drivers/gpu/drm/rcar-du/Kconfig
> > @@ -13,6 +13,13 @@ config DRM_RCAR_DU
> >  	  Choose this option if you have an R-Car chipset.
> >  	  If M is selected the module will be called rcar-du-drm.
> >
> > +config DRM_RCAR_CMM
> > +	bool "R-Car DU Color Management Module (CMM) Support"
> > +	depends on DRM && OF
> > +	depends on DRM_RCAR_DU
> > +	help
> > +	  Enable support for R-Car Color Management Module (CMM).
> > +
> >  config DRM_RCAR_DW_HDMI
> >  	tristate "R-Car DU Gen3 HDMI Encoder Support"
> >  	depends on DRM && OF
> > diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
> > index 6c2ed9c46467..4d1187ccc3e5 100644
> > --- a/drivers/gpu/drm/rcar-du/Makefile
> > +++ b/drivers/gpu/drm/rcar-du/Makefile
> > @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_of.o \
> >  rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
> >  rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o
> >
> > +obj-$(CONFIG_DRM_RCAR_CMM)		+= rcar_cmm.o
> >  obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
> >  obj-$(CONFIG_DRM_RCAR_DW_HDMI)		+= rcar_dw_hdmi.o
> >  obj-$(CONFIG_DRM_RCAR_LVDS)		+= rcar_lvds.o
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/rcar-du/rcar_cmm.c
> > new file mode 100644
> > index 000000000000..5d9d917b91f4
> > --- /dev/null
> > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c
> > @@ -0,0 +1,197 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * rcar_cmm.c -- R-Car Display Unit Color Management Module
> > + *
> > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include <drm/drm_atomic.h>
> > +
> > +#include "rcar_cmm.h"
> > +
> > +#define CM2_LUT_CTRL		0x00
>
> I would write all register addresses with 3 (or 4) digits.
>
> > +#define CM2_LUT_CTRL_EN		BIT(0)
> > +#define CM2_LUT_TBLA		0x600
>
> I would define this as
>
> #define CM2_LUT_TBLA(n)		(0x600 + (n) * 4)
>

Ack to both

> > +
> > +struct rcar_cmm {
> > +	struct clk *clk;
> > +	void __iomem *base;
> > +	bool enabled;
> > +
> > +	/* LUT table scratch buffer. */
> > +	struct {
> > +		bool restore;
> > +		unsigned int size;
> > +		uint32_t table[CMM_GAMMA_LUT_SIZE];
> > +	} lut;
> > +};
> > +
> > +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg)
> > +{
> > +	return ioread32(rcmm->base + reg);
> > +}
> > +
> > +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data)
> > +{
> > +	iowrite32(data, rcmm->base + reg);
> > +}
> > +
> > +int rcar_cmm_setup(struct platform_device *pdev, struct rcar_cmm_config *config)
>
> Please document the functions exposed to the DU driver. It's hard to
> understand the setup vs. enable/disable split by just reading this
> driver.
>

Ack. Document it in the header or here in the implementation?

> > +{
> > +	struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> > +	unsigned int i;
> > +
> > +	if (config->lut.size > CMM_GAMMA_LUT_SIZE)
> > +		return -EINVAL;
> > +
> > +	/*
> > +	 * As cmm_setup is called by atomic commit tail helper, it might be
> > +	 * called before the enabling the CRTC (which calls cmm_enable()).
> > +	 *
> > +	 * Store the LUT table entries in the scratch buffer to be later
> > +	 * programmed at enable time.
> > +	 */
> > +	if (!rcmm->enabled) {
> > +		if (!config->lut.enable)
> > +			return 0;
> > +
> > +		for (i = 0; i < config->lut.size; ++i) {
> > +			struct drm_color_lut *lut = &config->lut.table[i];
> > +
> > +			rcmm->lut.table[i] = (lut->red & 0xff) << 16 |
> > +					     (lut->green & 0xff) << 8 |
> > +					     (lut->blue & 0xff);
> > +		}
> > +
> > +		rcmm->lut.restore = true;
> > +		rcmm->lut.size = config->lut.size;
> > +
> > +		return 0;
> > +	}
> > +
> > +	if (rcar_cmm_read(rcmm, CM2_LUT_CTRL) & CM2_LUT_CTRL_EN &&
> > +	    !config->lut.enable) {
> > +		rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
> > +		return 0;
> > +	}
> > +
> > +	/* Enable LUT and program the new gamma table values. */
> > +	rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_EN);
>
> Shouldn't you write the LUT contents before enabling it (same below) ?
>

Surprisingly, no. I lost quite some time trying to fix a bug that was
due to the fact I wrote the table content first, then enabled the CMM.

But, in facts, section 35A.3.2, which lists the CMM activation steps,
prescribes to enable the CMM first, then update the LUT table entries.

> > +	for (i = 0; i < config->lut.size; ++i) {
> > +		struct drm_color_lut *lut = &config->lut.table[i];
> > +		u32 val = (lut->red & 0xff) << 16 | (lut->green & 0xff) << 8 |
> > +			  (lut->blue & 0xff);
>
> Do you need to recompute the value, can't you use rcmm->lut.table ?
>

rcmm->lut.table stores the already computed table entries to be later
restored at 'enable()' time. Here I'm writing the values to the HW
directly, so I don't need to cache them in rcmm->lut.table first.

> > +
> > +		rcar_cmm_write(rcmm, CM2_LUT_TBLA + i * 4, val);
> > +	}
> > +
> > +	return 0;
> > +}
>
> You need to export this and the next two functions.
>

Ah! Correct, I wonder however if it makes any difference, as the CMM
and the DU will always be compiled together.

> > +
> > +int rcar_cmm_enable(struct platform_device *pdev)
> > +{
> > +	struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> > +	unsigned int i;
> > +	int ret;
> > +
> > +	if (rcmm->enabled)
> > +		return 0;
>
> Can this happen without a bug in the caller ? If it can, and assuming
> the caller balances the enable and disable calls, you will have
> unbalanced clk_prepare_enable() and clk_disable_unprepare() calls.
>

It shouldn't, but if I check here, I should check below as well.

> > +
> > +	ret = clk_prepare_enable(rcmm->clk);
> > +	if (ret)
> > +		return ret;
>
> Could you use pm_runtime_get_sync() instead ?
>

I'll move to use pm_runtime in next version

> > +
> > +	/* Apply the LUT table values saved at cmm_setup time. */
> > +	if (rcmm->lut.restore) {
> > +		rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_EN);
> > +		for (i = 0; i < rcmm->lut.size; ++i)
> > +			rcar_cmm_write(rcmm, CM2_LUT_TBLA + i * 4,
> > +				       rcmm->lut.table[i]);
> > +
> > +		rcmm->lut.restore = false;
> > +		rcmm->lut.size = 0;
> > +	}
> > +
> > +	rcmm->enabled = true;
> > +
> > +	return 0;
> > +}
> > +
> > +void rcar_cmm_disable(struct platform_device *pdev)
> > +{
> > +	struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> > +
> > +	rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
> > +
> > +	clk_disable_unprepare(rcmm->clk);
> > +
> > +	rcmm->lut.restore = false;
> > +	rcmm->lut.size = 0;
> > +	rcmm->enabled = false;
> > +}
> > +
> > +static int rcar_cmm_probe(struct platform_device *pdev)
> > +{
> > +	struct rcar_cmm *rcmm;
> > +	struct resource *res;
> > +	resource_size_t size;
> > +
> > +	rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL);
> > +	if (!rcmm)
> > +		return -ENOMEM;
> > +
> > +	platform_set_drvdata(pdev, rcmm);
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	size = resource_size(res);
> > +	if (!devm_request_mem_region(&pdev->dev, res->start, size,
> > +				     dev_name(&pdev->dev))) {
> > +		dev_err(&pdev->dev,
> > +			"can't request region for resource %pR\n", res);
> > +		return -EBUSY;
> > +	}
> > +
> > +	rcmm->base = devm_ioremap_nocache(&pdev->dev, res->start, size);
> > +	if (IS_ERR(rcmm->base))
> > +		return PTR_ERR(rcmm->base);
>
> Anything wrong with devm_ioremap_resource() ?
>

The manual prescribes to map the CMM register address space to a
non-cachable memory region (probably due to histograms tables,
which the CMM generates?). I admit I have been 'inspired' by the BSP
code, which maps the memory resources using dev_ioremap_nocache() (but
doesn't request_mem_region() first...)

> > +
> > +	rcmm->clk = devm_clk_get(&pdev->dev, NULL);
> > +	if (IS_ERR(rcmm->clk)) {
> > +		dev_err(&pdev->dev, "Failed to get CMM clock");
> > +		return PTR_ERR(rcmm->clk);
> > +	}
> > +
> > +	rcmm->lut.restore = false;
> > +	rcmm->lut.size = 0;
> > +	rcmm->enabled = false;
>
> As you allocate memory with kzalloc() you could skip this.
>

Yes, I should, even if I like explict initialization of driver global
flags.

> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id rcar_cmm_of_table[] = {
> > +	{ .compatible = "renesas,cmm-gen3" },
> > +	{ .compatible = "renesas,cmm-gen2" },
> > +	{ },
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table);
> > +
> > +static struct platform_driver rcar_cmm_platform_driver = {
> > +	.probe		= rcar_cmm_probe,
> > +	.driver		= {
> > +		.name	= "rcar-cmm",
> > +		.of_match_table = rcar_cmm_of_table,
> > +	},
>
> No need for suspend/resume support ? The DU driver should disable/enable
> the CMM in its suspend/resume paths, so this should be fine, but won't
> the LUT contents be lost and need to be restored ?
>

I should test this, you're right. In case, I'll cache the LUT content
at suspend, and verify if I need to restore it or not.

> > +};
> > +
> > +module_platform_driver(rcar_cmm_platform_driver);
> > +
> > +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org");
>
> Missing >.
>
> > +MODULE_DESCRIPTION("Renesas R-Car CMM Driver");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/rcar-du/rcar_cmm.h
> > new file mode 100644
> > index 000000000000..da61a145dc5c
> > --- /dev/null
> > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h
> > @@ -0,0 +1,38 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
>
> The .c and .h file licenses don't match.
>

Ah ups, that'a typo, but as the DU is licensed with GPL-2.0+ I should
probably change the SPDX header in the .c file.

> > +/*
> > + * rcar_cmm.h -- R-Car Display Unit Color Management Module
> > + *
> > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org>
> > + */
> > +
> > +#ifndef __RCAR_CMM_H__
> > +#define __RCAR_CMM_H__
> > +
> > +#include <linux/platform_device.h>
>
> You can forward-declare struct platform_device instead.
>
> > +
> > +#define CMM_GAMMA_LUT_SIZE		256
> > +
> > +struct drm_color_lut;
> > +
> > +/**
> > + * struct rcar_cmm_config - CMM configuration
> > + *
> > + * @lut:	1D-LUT configuration
> > + * @lut.enable:	1D-LUT enable flag
> > + * @lut.table:	1D-LUT table entries.
> > + * @lut.size	1D-LUT number of entries. Max is 256
>
> The last line is missing a colon.
>
> > + */
> > +struct rcar_cmm_config {
> > +	struct {
> > +		bool enable;
> > +		struct drm_color_lut *table;
> > +		unsigned int size;
> > +	} lut;
> > +};
> > +
> > +int rcar_cmm_enable(struct platform_device *);
>
> As the OF API looks up a struct device from a device_node, should we use
> struct device here ?

of_find_device_by_node() returns a "struct platform_device *".. I
could easily get to the struct device if you think it's better. I have
no strong preferences...

>
> > +void rcar_cmm_disable(struct platform_device *);
>
> I find headers more readable when function arguments are named. In this
> case the types probably provide enough information, but good luck trying
> to read a function such as
>
> int foo(int, int, bool);
>
> > +
> > +int rcar_cmm_setup(struct platform_device *, struct rcar_cmm_config *);
>
> Can the second argument be const ?
>
It probably could right now. Not sure if this will hold when we'll
have to read histograms from the CMM, if they ever will go through
this structure.

Thanks
   j

> > +
> > +#endif /* __RCAR_CMM_H__ */
>
> --
> Regards,
>
> Laurent Pinchart

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  parent reply index

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-06 14:22 [PATCH 00/20] drm: rcar-du: Add Color Management Module (CMM) Jacopo Mondi
2019-06-06 14:22 ` [PATCH 01/20] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation Jacopo Mondi
2019-06-06 16:52   ` Laurent Pinchart
2019-06-06 18:06   ` Geert Uytterhoeven
2019-06-06 20:19   ` Sergei Shtylyov
2019-06-06 14:22 ` [PATCH 02/20] dt-bindings: display, renesas,du: Document cmms property Jacopo Mondi
2019-06-06 16:52   ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 03/20] dt-bindings: display, renesas,du: Update 'vsps' in example Jacopo Mondi
2019-06-06 16:53   ` Laurent Pinchart
2019-06-06 20:00     ` Geert Uytterhoeven
2019-06-07 11:36       ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 04/20] clk: renesas: r8a7796: Add CMM clocks Jacopo Mondi
2019-06-06 14:22 ` [PATCH 05/20] clk: renesas: r8a7795: " Jacopo Mondi
2019-06-06 16:58   ` Laurent Pinchart
2019-06-06 18:18     ` Jacopo Mondi
2019-06-12  7:41   ` Geert Uytterhoeven
2019-06-06 14:22 ` [PATCH 06/20] clk: renesas: r8a77965: " Jacopo Mondi
2019-06-06 16:59   ` Laurent Pinchart
2019-06-12  7:43   ` Geert Uytterhoeven
2019-06-06 14:22 ` [PATCH 07/20] clk: renesas: r8a77990: " Jacopo Mondi
2019-06-06 17:00   ` Laurent Pinchart
2019-06-12  7:43   ` Geert Uytterhoeven
2019-06-06 14:22 ` [PATCH 08/20] clk: renesas: r8a77995: " Jacopo Mondi
2019-06-06 17:00   ` Laurent Pinchart
2019-06-12  7:44   ` Geert Uytterhoeven
2019-06-06 14:22 ` [PATCH 09/20] arm64: dts: renesas: r8a7796: Add CMM units Jacopo Mondi
2019-06-06 17:04   ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 10/20] arm64: dts: renesas: r8a7795: " Jacopo Mondi
2019-06-06 17:06   ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 11/20] arm64: dts: renesas: r8a77965: " Jacopo Mondi
2019-06-06 17:06   ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 12/20] arm64: dts: renesas: r8a77990: " Jacopo Mondi
2019-06-06 17:07   ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 13/20] arm64: dts: renesas: r8a77995: " Jacopo Mondi
2019-06-06 17:08   ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 14/20] drm: rcar-du: Add support for CMM Jacopo Mondi
2019-06-07 11:35   ` Laurent Pinchart
2019-06-07 11:44     ` Laurent Pinchart
2019-06-07 12:18     ` Laurent Pinchart
2019-06-14  8:54     ` Jacopo Mondi [this message]
2019-06-06 14:22 ` [PATCH 15/20] drm: rcar-du: Claim CMM support for Gen3 SoCs Jacopo Mondi
2019-06-07 11:38   ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 16/20] drm: rcar-du: kms: Collect CMM instances Jacopo Mondi
2019-06-07 11:49   ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 17/20] drm: rcar-du: crtc: Enable and disable CMMs Jacopo Mondi
2019-06-07 11:51   ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 18/20] drm: rcar-du: group: Enable DU's CMM extension Jacopo Mondi
2019-06-07 11:55   ` Laurent Pinchart
2019-06-06 14:22 ` [PATCH 19/20] drm: rcar-du: crtc: Register GAMMA_LUT properties Jacopo Mondi
2019-06-07 12:03   ` Laurent Pinchart
2019-06-14  8:15     ` Jacopo Mondi
2019-06-14  8:42       ` Daniel Vetter
2019-06-14  9:27         ` Jacopo Mondi
2019-06-14 14:47           ` Daniel Vetter
2019-06-06 14:22 ` [PATCH 20/20] drm: rcar-du: kms: Update CMM in atomic commit tail Jacopo Mondi
2019-06-07 12:06   ` Laurent Pinchart
2019-06-14  8:19     ` Jacopo Mondi

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190614085431.sbv2ivxouy4dsdse@uno.localdomain \
    --to=jacopo@jmondi.org \
    --cc=Harsha.ManjulaMallikarjun@in.bosch.com \
    --cc=VenkataRajesh.Kalakodima@in.bosch.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=koji.matsuoka.xm@renesas.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=muroya@ksk.co.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Renesas-SoC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-renesas-soc/0 linux-renesas-soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-renesas-soc linux-renesas-soc/ https://lore.kernel.org/linux-renesas-soc \
		linux-renesas-soc@vger.kernel.org linux-renesas-soc@archiver.kernel.org
	public-inbox-index linux-renesas-soc


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-renesas-soc


AGPL code for this site: git clone https://public-inbox.org/ public-inbox