Linux-Renesas-SoC Archive on lore.kernel.org
 help / color / Atom feed
From: Rob Herring <robh@kernel.org>
To: Simon Horman <horms+renesas@verge.net.au>
Cc: "Zhang Rui" <rui.zhang@intel.com>,
	"Eduardo Valentin" <edubezval@gmail.com>,
	"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	"Daniel Lezcano" <daniel.lezcano@linaro.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Magnus Damm" <magnus.damm@gmail.com>,
	"Yoshihiro Kaneko" <ykaneko0929@gmail.com>,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v2] dt-bindings: thermal: rcar-thermal: convert bindings to json-schema
Date: Thu, 10 Oct 2019 16:38:35 -0500
Message-ID: <20191010213835.GA12055@bogus> (raw)
In-Reply-To: <20190923120348.2908-1-horms+renesas@verge.net.au>

On Mon, Sep 23, 2019 at 02:03:48PM +0200, Simon Horman wrote:
> Convert Renesas R-Car Thermal bindings documentation to json-schema.
> Also name bindings documentation file according to the compat string
> being documented.
> 
> As a side effect of this change all currently supported/used compat
> strings are listed while no while card compat string is documented.
> This, in my opinion, is desirable as only supported hardware should
> be documented.
> 
> A possible follow-up is to deprecate renesas,rcar-thermal
> after describing thermal zones in the DT for R-Mobile APE6 and R-Car H1.
> 
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
> Based on v5.3
> Tested using:
>   ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml
> 
> v2
> * Update compat strings to reflect that:
>   - RZ/G1M and RZ/G1N are not compatible with renesas,rcar-gen2-thermal
>   - R-Car V3M, E3 and D3, and RZ/G2E are not compatible with
>     renesas,rcar-thermal
> * Update reg property
>   - Drop uninformative comment
>   - Do not limit to a maximum of one item
> * Add SPDX tag
> ---
>  .../devicetree/bindings/thermal/rcar-thermal.txt   |  78 --------------
>  .../bindings/thermal/renesas,rcar-thermal.yaml     | 116 +++++++++++++++++++++
>  2 files changed, 116 insertions(+), 78 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/thermal/rcar-thermal.txt
>  create mode 100644 Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml


> diff --git a/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml
> new file mode 100644
> index 000000000000..a55c018a3a1f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/renesas,rcar-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car Thermal
> +
> +maintainers:
> +  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
> +  - Geert Uytterhoeven <geert+renesas@glider.be>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - renesas,thermal-r8a73a4       # R-Mobile APE6
> +              - renesas,thermal-r8a7779       # R-Car H1
> +          - const: renesas,rcar-thermal       # Without thermal-zone
> +
> +      - items:
> +          - enum:
> +              - renesas,thermal-r8a7790       # R-Car H2
> +              - renesas,thermal-r8a7791       # R-Car M2-W
> +              - renesas,thermal-r8a7792       # R-Car V2H
> +              - renesas,thermal-r8a7793       # R-Car M2-N
> +          - const: renesas,rcar-gen2-thermal  # With thermal-zone
> +          - const: renesas,rcar-thermal       # Without thermal-zone
> +
> +      - items:
> +          - enum:
> +              - renesas,thermal-r8a7743       # RZ/G1M
> +              - renesas,thermal-r8a7744       # RZ/G1N
> +          - const: renesas,rcar-gen2-thermal  # With thermal-zone
> +
> +      - items:
> +          - enum:
> +              - renesas,thermal-r8a774c0      # RZ/G2E
> +              - renesas,thermal-r8a77970      # R-Car V3M
> +              - renesas,thermal-r8a77990      # R-Car E3
> +              - renesas,thermal-r8a77995      # R-Car D3
> +
> +  reg: true
> +    # The 1st reg will be recognized as common register if it has "interrupts".

reg:
  minItems: 1
  maxItems: 4 (or ?, I assume there is some known max)
  additionalItems: true
  items:
    - description: common register if it has "interrupts" or ...
    - description: ...

> +
> +  interrupts:
> +    # If present should contain 3 interrupts for R-Car V3M/E3/D3 and RZ/G2E,
> +    # otherwise 1 interrupt.
> +    minItems: 1
> +    maxItems: 3
> +
> +  clocks:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples :
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/clock/r8a7790-clock.h>
> +
> + # Example (non interrupt support):
> +  - |
> +    thermal@ffc48000 {
> +        compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
> +        reg = <0xffc48000 0x38>;
> +    };
> +
> +  # Example (interrupt support):
> +  - |
> +    thermal@e61f0000 {
> +        compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
> +        reg = <0xe61f0000 0x14
> +               0xe61f0100 0x38
> +               0xe61f0200 0x38
> +               0xe61f0300 0x38>;

This should be bracketed for each item or the schema thinks this is 1 
item instead of 4.

> +        interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
> +    };
> +
> +  # Example (with thermal-zone):
> +  - |
> +    thermal-zones {
> +        cpu_thermal: cpu-thermal {
> +            polling-delay-passive = <1000>;
> +            polling-delay = <5000>;
> +
> +            thermal-sensors = <&thermal>;
> +
> +            trips {
> +                cpu-crit {
> +                    temperature = <115000>;
> +                    hysteresis = <0>;
> +                    type = "critical";
> +                };
> +            };
> +            cooling-maps {
> +            };
> +        };
> +    };
> +
> +    thermal: thermal@e61f0000 {
> +        compatible = "renesas,thermal-r8a7790",
> +                     "renesas,rcar-gen2-thermal",
> +                     "renesas,rcar-thermal";
> +        reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
> +        interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
> +        power-domains = <&cpg_clocks>;
> +        #thermal-sensor-cells = <0>;
> +    };
> -- 
> 2.11.0
> 

      reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-23 12:03 Simon Horman
2019-10-10 21:38 ` Rob Herring [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191010213835.GA12055@bogus \
    --to=robh@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=horms+renesas@verge.net.au \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=rui.zhang@intel.com \
    --cc=ykaneko0929@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Renesas-SoC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-renesas-soc/0 linux-renesas-soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-renesas-soc linux-renesas-soc/ https://lore.kernel.org/linux-renesas-soc \
		linux-renesas-soc@vger.kernel.org linux-renesas-soc@archiver.kernel.org
	public-inbox-index linux-renesas-soc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-renesas-soc


AGPL code for this site: git clone https://public-inbox.org/ public-inbox