From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v2 2/6] arm64: dts: renesas: r8a77961: Add GPIO nodes
Date: Mon, 16 Dec 2019 13:47:36 +0100 [thread overview]
Message-ID: <20191216124740.16647-3-geert+renesas@glider.be> (raw)
In-Reply-To: <20191216124740.16647-1-geert+renesas@glider.be>
Add device nodes for the GPIO controllers on the Renesas R-Car M3-W+
(r8a77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
- No changes.
Test procedure (with "arm64: dts: renesas: r8a77961: Add RAVB node"):
1. "ifconfig eth0 1.2.3.4",
2. "watch grep e6052000.gpio /proc/interrupts",
3. See interrupt count increase when Ethernet link goes up.
---
arch/arm64/boot/dts/renesas/r8a77961.dtsi | 85 +++++++++++++++++++++--
1 file changed, 80 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index ea2c6445977f3d99..10e768ce2bc70e0c 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -328,49 +328,124 @@
status = "disabled";
};
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 29>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ };
+
gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 64 15>;
#interrupt-cells = <2>;
interrupt-controller;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 96 16>;
#interrupt-cells = <2>;
interrupt-controller;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 128 18>;
#interrupt-cells = <2>;
interrupt-controller;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 160 26>;
#interrupt-cells = <2>;
interrupt-controller;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
#interrupt-cells = <2>;
interrupt-controller;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 906>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 906>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 4>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
pfc: pin-controller@e6060000 {
--
2.17.1
next prev parent reply other threads:[~2019-12-16 12:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-16 12:47 [PATCH v2 0/6] arm64: dts: renesas: r8a77961: Add more device nodes Geert Uytterhoeven
2019-12-16 12:47 ` [PATCH v2 1/6] arm64: dts: renesas: r8a77961: Add RWDT node Geert Uytterhoeven
2019-12-17 14:10 ` Eugeniu Rosca
2019-12-16 12:47 ` Geert Uytterhoeven [this message]
2019-12-17 14:19 ` [PATCH v2 2/6] arm64: dts: renesas: r8a77961: Add GPIO nodes Eugeniu Rosca
2019-12-16 12:47 ` [PATCH v2 3/6] arm64: dts: renesas: r8a77961: Add RAVB node Geert Uytterhoeven
2019-12-17 14:07 ` Eugeniu Rosca
2019-12-16 12:47 ` [PATCH v2 4/6] arm64: dts: renesas: r8a77961: Add SYS-DMAC nodes Geert Uytterhoeven
2019-12-17 16:38 ` Eugeniu Rosca
2019-12-16 12:47 ` [PATCH v2 5/6] arm64: dts: renesas: r8a77961: Add I2C nodes Geert Uytterhoeven
2019-12-17 14:14 ` Eugeniu Rosca
2019-12-16 12:47 ` [PATCH v2 6/6] arm64: dts: renesas: r8a77961: Add SDHI nodes Geert Uytterhoeven
2019-12-17 14:30 ` Eugeniu Rosca
2019-12-17 12:01 ` [PATCH v2 0/6] arm64: dts: renesas: r8a77961: Add more device nodes Eugeniu Rosca
2019-12-17 12:19 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191216124740.16647-3-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=erosca@de.adit-jv.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).