[PATCH 0/2] media: i2c: ov772x: Enable BT656 mode and test pattern support

[PATCH 0/2] media: i2c: ov772x: Enable BT656 mode and test pattern support

[Lad Prabhakar]

Hi All,

This patch series adds support for BT656 mode in the ov772x sensor
and also enables color bar test pattern control.

Cheers,
Prabhakar

Lad Prabhakar (2):
  media: i2c: ov772x: Add support for BT656 mode
  media: i2c: ov772x: Add test pattern control

 drivers/media/i2c/ov772x.c | 48 +++++++++++++++++++++++++++++++++++++++++++---
 include/media/i2c/ov772x.h |  1 +
 2 files changed, 46 insertions(+), 3 deletions(-)

-- 
2.7.4

[PATCH 1/2] media: i2c: ov772x: Add support for BT656 mode

[Lad Prabhakar]

Add support to read the bus-type and enable BT656 mode if needed.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/media/i2c/ov772x.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 2cc6a67..3b7dfba 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -31,6 +31,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
 #include <media/v4l2-image-sizes.h>
 #include <media/v4l2-subdev.h>
 
@@ -434,6 +435,7 @@ struct ov772x_priv {
 #ifdef CONFIG_MEDIA_CONTROLLER
 	struct media_pad pad;
 #endif
+	struct v4l2_fwnode_endpoint ep;
 };
 
 /*
@@ -585,7 +587,6 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
 				 enable ? 0 : SOFT_SLEEP_MODE);
 	if (ret)
 		goto done;
-
 	if (enable) {
 		dev_dbg(&client->dev, "format %d, win %s\n",
 			priv->cfmt->code, priv->win->name);
@@ -1104,7 +1105,10 @@ static int ov772x_set_params(struct ov772x_priv *priv,
 		goto ov772x_set_fmt_error;
 
 	/* COM7: Sensor resolution and output format control. */
-	ret = regmap_write(priv->regmap, COM7, win->com7_bit | cfmt->com7);
+	val = win->com7_bit | cfmt->com7;
+	if (priv->ep.bus_type == V4L2_MBUS_BT656)
+		val |= ITU656_ON_OFF;
+	ret = regmap_write(priv->regmap, COM7, val);
 	if (ret < 0)
 		goto ov772x_set_fmt_error;
 
@@ -1354,6 +1358,7 @@ static const struct v4l2_subdev_ops ov772x_subdev_ops = {
 
 static int ov772x_probe(struct i2c_client *client)
 {
+	struct fwnode_handle *endpoint;
 	struct ov772x_priv	*priv;
 	int			ret;
 	static const struct regmap_config ov772x_regmap_config = {
@@ -1415,6 +1420,20 @@ static int ov772x_probe(struct i2c_client *client)
 		goto error_clk_put;
 	}
 
+	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev),
+						  NULL);
+	if (!endpoint) {
+		dev_err(&client->dev, "endpoint node not found\n");
+		goto error_clk_put;
+	}
+
+	ret = v4l2_fwnode_endpoint_parse(endpoint, &priv->ep);
+	fwnode_handle_put(endpoint);
+	if (ret) {
+		dev_err(&client->dev, "Could not parse endpoint\n");
+		goto error_clk_put;
+	}
+
 	ret = ov772x_video_probe(priv);
 	if (ret < 0)
 		goto error_gpio_put;
-- 
2.7.4

Re: [PATCH 1/2] media: i2c: ov772x: Add support for BT656 mode

[Sakari Ailus]

Hi Prabhakar,

On Fri, Jul 24, 2020 at 04:08:15PM +0100, Lad Prabhakar wrote:
> Add support to read the bus-type and enable BT656 mode if needed.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>

The DT bindings should also be changed.

The default should be parallel, I guess, since the type hasn't been
documented. Parsing should be also updated so the driver can set meaningful
defaults for the flags --- this btw. also applies to the corresponding
ov5640 patch.

-- 
Sakari Ailus

Re: [PATCH 1/2] media: i2c: ov772x: Add support for BT656 mode

[Lad, Prabhakar]

Hi Sakari,

Thank you for the review.

On Fri, Jul 31, 2020 at 5:03 PM Sakari Ailus <sakari.ailus@iki.fi> wrote:
>
> Hi Prabhakar,
>
> On Fri, Jul 24, 2020 at 04:08:15PM +0100, Lad Prabhakar wrote:
> > Add support to read the bus-type and enable BT656 mode if needed.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
>
> The DT bindings should also be changed.
>
I'll get this done in V2.

> The default should be parallel, I guess, since the type hasn't been
> documented. Parsing should be also updated so the driver can set meaningful
> defaults for the flags --- this btw. also applies to the corresponding
> ov5640 patch.
>
Agreed, will do.

Cheers,
Prabhakar
> --
> Sakari Ailus

[PATCH 2/2] media: i2c: ov772x: Add test pattern control

[Lad Prabhakar]

Add support for test pattern control supported by the sensor.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/media/i2c/ov772x.c | 25 ++++++++++++++++++++++++-
 include/media/i2c/ov772x.h |  1 +
 2 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 3b7dfba..bdee2a8 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -227,7 +227,7 @@
 
 /* COM3 */
 #define SWAP_MASK       (SWAP_RGB | SWAP_YUV | SWAP_ML)
-#define IMG_MASK        (VFLIP_IMG | HFLIP_IMG)
+#define IMG_MASK        (VFLIP_IMG | HFLIP_IMG | SCOLOR_TEST)
 
 #define VFLIP_IMG       0x80	/* Vertical flip image ON/OFF selection */
 #define HFLIP_IMG       0x40	/* Horizontal mirror image ON/OFF selection */
@@ -425,6 +425,7 @@ struct ov772x_priv {
 	const struct ov772x_win_size     *win;
 	struct v4l2_ctrl		 *vflip_ctrl;
 	struct v4l2_ctrl		 *hflip_ctrl;
+	unsigned int			  test_pattern;
 	/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
 	struct v4l2_ctrl		 *band_filter_ctrl;
 	unsigned int			  fps;
@@ -540,6 +541,11 @@ static const struct ov772x_win_size ov772x_win_sizes[] = {
 	},
 };
 
+static const char * const ov772x_test_pattern_menu[] = {
+	"Disabled",
+	"Vertical Color Bar Type 1",
+};
+
 /*
  * frame rate settings lists
  */
@@ -754,6 +760,13 @@ static int ov772x_s_frame_interval(struct v4l2_subdev *sd,
 	return ret;
 }
 
+static int ov772x_enable_test_pattern(struct ov772x_priv *priv, u32 pattern)
+{
+	priv->test_pattern = pattern;
+	return regmap_update_bits(priv->regmap, COM3, SCOLOR_TEST,
+				  pattern ? SCOLOR_TEST : 0x00);
+}
+
 static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct ov772x_priv *priv = container_of(ctrl->handler,
@@ -801,6 +814,8 @@ static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
 		}
 
 		return ret;
+	case V4L2_CID_TEST_PATTERN:
+		return ov772x_enable_test_pattern(priv, ctrl->val);
 	}
 
 	return -EINVAL;
@@ -1095,10 +1110,14 @@ static int ov772x_set_params(struct ov772x_priv *priv,
 		val |= VFLIP_IMG;
 	if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP))
 		val |= HFLIP_IMG;
+	if (priv->info && (priv->info->flags & OV772X_FLAG_TEST_PATTERN))
+		val |= SCOLOR_TEST;
 	if (priv->vflip_ctrl->val)
 		val ^= VFLIP_IMG;
 	if (priv->hflip_ctrl->val)
 		val ^= HFLIP_IMG;
+	if (priv->test_pattern)
+		val ^= SCOLOR_TEST;
 
 	ret = regmap_update_bits(priv->regmap, COM3, SWAP_MASK | IMG_MASK, val);
 	if (ret < 0)
@@ -1399,6 +1418,10 @@ static int ov772x_probe(struct i2c_client *client)
 	priv->band_filter_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
 						   V4L2_CID_BAND_STOP_FILTER,
 						   0, 256, 1, 0);
+	v4l2_ctrl_new_std_menu_items(&priv->hdl, &ov772x_ctrl_ops,
+				     V4L2_CID_TEST_PATTERN,
+				     ARRAY_SIZE(ov772x_test_pattern_menu) - 1,
+				     0, 0, ov772x_test_pattern_menu);
 	priv->subdev.ctrl_handler = &priv->hdl;
 	if (priv->hdl.error) {
 		ret = priv->hdl.error;
diff --git a/include/media/i2c/ov772x.h b/include/media/i2c/ov772x.h
index a1702d4..65e6f8d 100644
--- a/include/media/i2c/ov772x.h
+++ b/include/media/i2c/ov772x.h
@@ -12,6 +12,7 @@
 /* for flags */
 #define OV772X_FLAG_VFLIP	(1 << 0) /* Vertical flip image */
 #define OV772X_FLAG_HFLIP	(1 << 1) /* Horizontal flip image */
+#define OV772X_FLAG_TEST_PATTERN	(1 << 2) /* Test pattern */
 
 /*
  * for Edge ctrl
-- 
2.7.4