linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Takeshi Saito <takeshi.saito.xv@renesas.com>,
	Koji Matsuoka <koji.matsuoka.xm@renesas.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] arm64: dts: renesas: falcon: Enable MMC
Date: Sun, 27 Dec 2020 18:42:00 +0100	[thread overview]
Message-ID: <20201227174202.40834-7-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20201227174202.40834-1-wsa+renesas@sang-engineering.com>

From: Takeshi Saito <takeshi.saito.xv@renesas.com>

Enable MMC on the Falcon board.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
[wsa: double checked & rebased]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 .../boot/dts/renesas/r8a779a0-falcon.dts      | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
index 48801f2bdbe5..0c44466d398f 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -20,6 +20,24 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &avb0 {
@@ -169,6 +187,23 @@ &i2c6 {
 	clock-frequency = <100000>;
 };
 
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
 &pfc {
 	avb0_pins: avb0 {
 		mux {
@@ -307,6 +342,12 @@ i2c6_pins: i2c6 {
 		groups = "i2c6";
 		function = "i2c6";
 	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
 };
 
 &rwdt {
-- 
2.28.0


  parent reply	other threads:[~2020-12-27 17:43 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-27 17:41 [PATCH 0/6] v3u: add SDHI/MMC support Wolfram Sang
2020-12-27 17:41 ` [PATCH 1/6] dt-bindings: mmc: renesas,sdhi: Add r8a779a0 support Wolfram Sang
2021-01-08  3:36   ` Rob Herring
2021-01-08 12:23   ` Geert Uytterhoeven
2021-01-13 11:25   ` Ulf Hansson
2020-12-27 17:41 ` [PATCH 2/6] clk: renesas: rcar-gen3: remove cpg_quirks access when registering SD clock Wolfram Sang
2021-01-08 12:59   ` Geert Uytterhoeven
2020-12-27 17:41 ` [PATCH 3/6] clk: renesas: rcar-gen3: factor out CPG library Wolfram Sang
2021-01-08 12:59   ` Geert Uytterhoeven
2020-12-27 17:41 ` [PATCH 4/6] clk: renesas: r8a779a0: add SDHI support Wolfram Sang
2021-01-08 12:59   ` Geert Uytterhoeven
2020-12-27 17:41 ` [PATCH 5/6] arm64: dts: renesas: r8a779a0: Add MMC node Wolfram Sang
2020-12-27 17:45   ` Wolfram Sang
2021-01-08 12:47   ` Geert Uytterhoeven
2020-12-27 17:42 ` Wolfram Sang [this message]
2021-01-08 12:59   ` [PATCH 6/6] arm64: dts: renesas: falcon: Enable MMC Geert Uytterhoeven
2021-01-19 12:46     ` Wolfram Sang
2021-01-12 11:47   ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201227174202.40834-7-wsa+renesas@sang-engineering.com \
    --to=wsa+renesas@sang-engineering.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=koji.matsuoka.xm@renesas.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=takeshi.saito.xv@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).