From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/5] WIP! arm64: dts: renesas: falcon: Add Ethernet-AVB1-5 support
Date: Thu, 21 Jan 2021 11:06:19 +0100 [thread overview]
Message-ID: <20210121100619.5653-6-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20210121100619.5653-1-wsa+renesas@sang-engineering.com>
PHYs on the subboard could not be reached via remote access. But this is
the latest DTS snipplet with some fixes suggested by Geert as a starting
point. Not for upstream yet!
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
Change since v1:
* new patch
* removed rxc-skew-ps property
* renamed phy-addresses to 0 ('@0')
* dropped '_tx' suffix from 'pins_mii' config
* added 'okay' status
* moved entries to Falcon CPU dtsi
.../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 160 ++++++++++++++++++
1 file changed, 160 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index f96b03f39787..0059381443f6 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -50,6 +50,81 @@ phy0: ethernet-phy@0 {
};
};
+&avb1 {
+ pinctrl-0 = <&avb1_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
+
+ phy1: ethernet-phy@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&avb2 {
+ pinctrl-0 = <&avb2_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy2>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
+
+ phy2: ethernet-phy@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&avb3 {
+ pinctrl-0 = <&avb3_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy3>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
+
+ phy3: ethernet-phy@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&avb4 {
+ pinctrl-0 = <&avb4_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
+
+ phy4: ethernet-phy@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio8>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio8 15 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&avb5 {
+ pinctrl-0 = <&avb5_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
+
+ phy5: ethernet-phy@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio9>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio9 15 GPIO_ACTIVE_LOW>;
+ };
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
@@ -133,6 +208,91 @@ pins_mii {
};
+ avb1_pins: avb1 {
+ mux {
+ groups = "avb1_link", "avb1_mdio", "avb1_rgmii", "avb1_txcrefclk";
+ function = "avb1";
+ };
+
+ pins_mdio {
+ groups = "avb1_mdio";
+ drive-strength = <21>;
+ };
+
+ pins_mii {
+ groups = "avb1_rgmii";
+ drive-strength = <21>;
+ };
+ };
+
+ avb2_pins: avb2 {
+ mux {
+ groups = "avb2_link", "avb2_mdio", "avb2_rgmii", "avb2_txcrefclk";
+ function = "avb2";
+ };
+
+ pins_mdio {
+ groups = "avb2_mdio";
+ drive-strength = <21>;
+ };
+
+ pins_mii {
+ groups = "avb2_rgmii";
+ drive-strength = <21>;
+ };
+ };
+
+ avb3_pins: avb3 {
+ mux {
+ groups = "avb3_link", "avb3_mdio", "avb3_rgmii", "avb3_txcrefclk";
+ function = "avb3";
+ };
+
+ pins_mdio {
+ groups = "avb3_mdio";
+ drive-strength = <21>;
+ };
+
+ pins_mii {
+ groups = "avb3_rgmii";
+ drive-strength = <21>;
+ };
+ };
+
+ avb4_pins: avb4 {
+ mux {
+ groups = "avb4_link", "avb4_mdio", "avb4_rgmii", "avb4_txcrefclk";
+ function = "avb4";
+ };
+
+ pins_mdio {
+ groups = "avb4_mdio";
+ drive-strength = <21>;
+ };
+
+ pins_mii {
+ groups = "avb4_rgmii";
+ drive-strength = <21>;
+ };
+ };
+
+ avb5_pins: avb5 {
+ mux {
+ groups = "avb5_link", "avb5_mdio", "avb5_rgmii", "avb5_txcrefclk";
+ function = "avb5";
+ };
+
+ pins_mdio {
+ groups = "avb5_mdio";
+ drive-strength = <21>;
+ };
+
+ ins_mii {
+ groups = "avb5_rgmii";
+ drive-strength = <21>;
+ };
+ };
+
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
--
2.29.2
next prev parent reply other threads:[~2021-01-21 10:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-21 10:06 [PATCH v2 0/5] v3u: add support for RAVB Wolfram Sang
2021-01-21 10:06 ` [PATCH v2 1/5] dt-bindings: net: renesas,etheravb: Add r8a779a0 support Wolfram Sang
2021-01-23 3:31 ` Jakub Kicinski
2021-01-21 10:06 ` [PATCH v2 2/5] clk: renesas: r8a779a0: add clocks for RAVB Wolfram Sang
2021-01-22 10:16 ` Geert Uytterhoeven
2021-01-21 10:06 ` [PATCH v2 3/5] arm64: dts: renesas: r8a779a0: Add Ethernet-AVB support Wolfram Sang
2021-01-22 10:20 ` Geert Uytterhoeven
2021-01-21 10:06 ` [PATCH v2 4/5] arm64: dts: renesas: falcon: Add Ethernet-AVB0 support Wolfram Sang
2021-01-22 10:23 ` Geert Uytterhoeven
2021-01-21 10:06 ` Wolfram Sang [this message]
2021-01-22 10:26 ` [PATCH v2 5/5] WIP! arm64: dts: renesas: falcon: Add Ethernet-AVB1-5 support Geert Uytterhoeven
2021-01-22 10:47 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210121100619.5653-6-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).