From: Biju Das <biju.das.jz@bp.renesas.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: "Biju Das" <biju.das.jz@bp.renesas.com>,
"Chris Brandt" <chris.brandt@renesas.com>,
"Wolfram Sang" <wsa+renesas@sang-engineering.com>,
"Arnd Bergmann" <arnd@arndb.de>,
"Jarkko Nikula" <jarkko.nikula@linux.intel.com>,
"Jean Delvare" <jdelvare@suse.de>,
"Khalil Blaiech" <kblaiech@mellanox.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski@canonical.com>,
"Bence Csókás" <bence98@sch.bme.hu>,
"Yicong Yang" <yangyicong@hisilicon.com>,
"Mike Rapoport" <rppt@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
linux-i2c@vger.kernel.org,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Chris Paterson" <Chris.Paterson2@renesas.com>,
"Biju Das" <biju.das@bp.renesas.com>,
"Prabhakar Mahadev Lad" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH 3/5] i2c: riic: Add RZ/G2L support
Date: Fri, 11 Jun 2021 17:56:22 +0100 [thread overview]
Message-ID: <20210611165624.30749-4-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20210611165624.30749-1-biju.das.jz@bp.renesas.com>
RZ/G2L i2c controller is compatible with RZ/A i2c controller.
By default IP is in reset state, so need to perform release
reset before accessing any register.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-riic.c | 21 +++++++++++++++++++++
2 files changed, 22 insertions(+)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 281a65d9b44b..5da09288b461 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -941,6 +941,7 @@ config I2C_QUP
config I2C_RIIC
tristate "Renesas RIIC adapter"
depends on ARCH_RENESAS || COMPILE_TEST
+ select RESET_CONTROLLER
help
If you say yes to this option, support will be included for the
Renesas RIIC I2C interface.
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index 4eccc0f69861..a3860631c6db 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -42,8 +42,10 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/reset.h>
#define RIIC_ICCR1 0x00
#define RIIC_ICCR2 0x04
@@ -86,6 +88,11 @@
#define RIIC_INIT_MSG -1
+enum riic_type {
+ RIIC_RZ_A,
+ RIIC_RZ_G2L,
+};
+
struct riic_dev {
void __iomem *base;
u8 *buf;
@@ -395,7 +402,9 @@ static int riic_i2c_probe(struct platform_device *pdev)
struct i2c_adapter *adap;
struct resource *res;
struct i2c_timings i2c_t;
+ struct reset_control *rstc;
int i, ret;
+ enum riic_type type;
riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL);
if (!riic)
@@ -412,6 +421,17 @@ static int riic_i2c_probe(struct platform_device *pdev)
return PTR_ERR(riic->clk);
}
+ type = (enum riic_type)of_device_get_match_data(&pdev->dev);
+ if (type == RIIC_RZ_G2L) {
+ rstc = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(rstc)) {
+ dev_err(&pdev->dev, "Error: missing reset ctrl\n");
+ return PTR_ERR(rstc);
+ }
+
+ reset_control_deassert(rstc);
+ }
+
for (i = 0; i < ARRAY_SIZE(riic_irqs); i++) {
res = platform_get_resource(pdev, IORESOURCE_IRQ, riic_irqs[i].res_num);
if (!res)
@@ -472,6 +492,7 @@ static int riic_i2c_remove(struct platform_device *pdev)
}
static const struct of_device_id riic_i2c_dt_ids[] = {
+ { .compatible = "renesas,riic-r9a07g044", .data = (void *)RIIC_RZ_G2L },
{ .compatible = "renesas,riic-rz" },
{ /* Sentinel */ },
};
--
2.17.1
next prev parent reply other threads:[~2021-06-11 16:56 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-11 16:56 [PATCH 0/5] Add RZ/G2L I2C support Biju Das
2021-06-11 16:56 ` [PATCH 1/5] dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller Biju Das
2021-06-14 12:43 ` Geert Uytterhoeven
2021-06-11 16:56 ` [PATCH 2/5] drivers: clk: renesas: r9a07g044-cpg: Add I2C Clocks Biju Das
2021-06-14 12:32 ` Geert Uytterhoeven
2021-06-11 16:56 ` Biju Das [this message]
2021-06-14 12:38 ` [PATCH 3/5] i2c: riic: Add RZ/G2L support Geert Uytterhoeven
2021-06-14 16:04 ` Biju Das
2021-06-14 13:27 ` Philipp Zabel
2021-06-14 13:38 ` Geert Uytterhoeven
2021-06-14 17:20 ` Biju Das
2021-06-11 16:56 ` [PATCH 4/5] arm64: dts: renesas: r9a07g044: Add I2C nodes Biju Das
2021-06-14 12:45 ` Geert Uytterhoeven
2021-06-11 16:56 ` [PATCH 5/5] arm64: defconfig: Enable RIIC Biju Das
2021-06-14 12:45 ` Geert Uytterhoeven
2021-08-13 9:55 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210611165624.30749-4-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=arnd@arndb.de \
--cc=bence98@sch.bme.hu \
--cc=biju.das@bp.renesas.com \
--cc=chris.brandt@renesas.com \
--cc=geert+renesas@glider.be \
--cc=jarkko.nikula@linux.intel.com \
--cc=jdelvare@suse.de \
--cc=kblaiech@mellanox.com \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=rppt@kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wsa+renesas@sang-engineering.com \
--cc=yangyicong@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).