[PATCH 1/3] mmc: core: clear flags before allowing to retune

[Wolfram Sang <wsa+renesas@sang-engineering.com>]

It might be that something goes wrong during tuning so the MMC core will
immediately trigger a retune. In our case it was:

 - we sent a tuning block
 - there was an error so we need to send an abort cmd to the eMMC
 - the abort cmd had a CRC error
 - retune was set by the MMC core

This lead to a vicious circle causing a performance regression of 75%.
So, clear retuning flags before we enable retuning to start with a known
cleared state.

Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/mmc/core/core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 4e52eb14198a..f397cf051b8d 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -937,11 +937,14 @@ int mmc_execute_tuning(struct mmc_card *card)
 
 	err = host->ops->execute_tuning(host, opcode);
 
-	if (err)
+	if (err) {
 		pr_err("%s: tuning execution failed: %d\n",
 			mmc_hostname(host), err);
-	else
+	} else {
+		host->retune_now = 0;
+		host->need_retune = 0;
 		mmc_retune_enable(host);
+	}
 
 	return err;
 }
-- 
2.30.2