linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo@jmondi.org>
To: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH 08/11] rcar-vin: Create a callback to setup media links
Date: Wed, 7 Jul 2021 12:33:55 +0200	[thread overview]
Message-ID: <20210707103355.wu75k2zskwq2ofy4@uno.localdomain> (raw)
In-Reply-To: <20210413180253.2575451-9-niklas.soderlund+renesas@ragnatech.se>

Hi Niklas,

On Tue, Apr 13, 2021 at 08:02:50PM +0200, Niklas Söderlund wrote:
> New IP versions will have different media graphs and require a different
> link setup. Breakout the specific link setup to a callback that are
> associated with the group.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
>  drivers/media/platform/rcar-vin/rcar-core.c | 97 ++++++++++++---------
>  drivers/media/platform/rcar-vin/rcar-vin.h  |  3 +
>  2 files changed, 57 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
> index 2628637084ae2aa9..d03ecd443b01c2b3 100644
> --- a/drivers/media/platform/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> @@ -247,7 +247,8 @@ static void rvin_group_cleanup(struct rvin_group *group)
>  	mutex_destroy(&group->lock);
>  }
>
> -static int rvin_group_init(struct rvin_group *group, struct rvin_dev *vin)
> +static int rvin_group_init(struct rvin_group *group, struct rvin_dev *vin,
> +			   void (*link_setup)(struct rvin_dev *))
>  {
>  	struct media_device *mdev = &group->mdev;
>  	const struct of_device_id *match;
> @@ -263,6 +264,8 @@ static int rvin_group_init(struct rvin_group *group, struct rvin_dev *vin)
>
>  	vin_dbg(vin, "found %u enabled VIN's in DT", group->count);
>
> +	group->link_setup = link_setup;
> +
>  	mdev->dev = vin->dev;
>  	mdev->ops = &rvin_media_ops;
>
> @@ -295,7 +298,8 @@ static void rvin_group_release(struct kref *kref)
>  	mutex_unlock(&rvin_group_lock);
>  }
>
> -static int rvin_group_get(struct rvin_dev *vin)
> +static int rvin_group_get(struct rvin_dev *vin,
> +			  void (*link_setup)(struct rvin_dev *))
>  {
>  	struct rvin_group *group;
>  	u32 id;
> @@ -327,7 +331,7 @@ static int rvin_group_get(struct rvin_dev *vin)
>  			goto err_group;
>  		}
>
> -		ret = rvin_group_init(group, vin);
> +		ret = rvin_group_init(group, vin, link_setup);
>  		if (ret) {
>  			kfree(group);
>  			vin_err(vin, "Failed to initialize group\n");
> @@ -386,7 +390,6 @@ static void rvin_group_put(struct rvin_dev *vin)
>  static int rvin_group_notify_complete(struct v4l2_async_notifier *notifier)
>  {
>  	struct rvin_dev *vin = v4l2_dev_to_vin(notifier->v4l2_dev);
> -	const struct rvin_group_route *route;
>  	unsigned int i;
>  	int ret;
>
> @@ -410,44 +413,7 @@ static int rvin_group_notify_complete(struct v4l2_async_notifier *notifier)
>  		}
>  	}
>
> -	/* Create all media device links between VINs and CSI-2's. */
> -	mutex_lock(&vin->group->lock);
> -	for (route = vin->info->routes; route->mask; route++) {
> -		struct media_pad *source_pad, *sink_pad;
> -		struct media_entity *source, *sink;
> -		unsigned int source_idx;
> -
> -		/* Check that VIN is part of the group. */
> -		if (!vin->group->vin[route->vin])
> -			continue;
> -
> -		/* Check that VIN' master is part of the group. */
> -		if (!vin->group->vin[rvin_group_id_to_master(route->vin)])
> -			continue;
> -
> -		/* Check that CSI-2 is part of the group. */
> -		if (!vin->group->remotes[route->csi].subdev)
> -			continue;
> -
> -		source = &vin->group->remotes[route->csi].subdev->entity;
> -		source_idx = rvin_group_csi_channel_to_pad(route->channel);
> -		source_pad = &source->pads[source_idx];
> -
> -		sink = &vin->group->vin[route->vin]->vdev.entity;
> -		sink_pad = &sink->pads[0];
> -
> -		/* Skip if link already exists. */
> -		if (media_entity_find_link(source_pad, sink_pad))
> -			continue;
> -
> -		ret = media_create_pad_link(source, source_idx, sink, 0, 0);
> -		if (ret) {
> -			vin_err(vin, "Error adding link from %s to %s\n",
> -				source->name, sink->name);
> -			break;
> -		}
> -	}
> -	mutex_unlock(&vin->group->lock);
> +	vin->group->link_setup(vin);

Compared to the previuous version, we've lost the ability to return
erros on failures in link creation. Is it intentional ?

Thanks
   j

>
>  	return ret;
>  }
> @@ -953,6 +919,51 @@ static int rvin_parallel_init(struct rvin_dev *vin)
>   * CSI-2
>   */
>
> +static void rvin_csi2_setup_links(struct rvin_dev *vin)
> +{
> +	const struct rvin_group_route *route;
> +	int ret;
> +
> +	/* Create all media device links between VINs and CSI-2's. */
> +	mutex_lock(&vin->group->lock);
> +	for (route = vin->info->routes; route->mask; route++) {
> +		struct media_pad *source_pad, *sink_pad;
> +		struct media_entity *source, *sink;
> +		unsigned int source_idx;
> +
> +		/* Check that VIN is part of the group. */
> +		if (!vin->group->vin[route->vin])
> +			continue;
> +
> +		/* Check that VIN' master is part of the group. */
> +		if (!vin->group->vin[rvin_group_id_to_master(route->vin)])
> +			continue;
> +
> +		/* Check that CSI-2 is part of the group. */
> +		if (!vin->group->remotes[route->csi].subdev)
> +			continue;
> +
> +		source = &vin->group->remotes[route->csi].subdev->entity;
> +		source_idx = rvin_group_csi_channel_to_pad(route->channel);
> +		source_pad = &source->pads[source_idx];
> +
> +		sink = &vin->group->vin[route->vin]->vdev.entity;
> +		sink_pad = &sink->pads[0];
> +
> +		/* Skip if link already exists. */
> +		if (media_entity_find_link(source_pad, sink_pad))
> +			continue;
> +
> +		ret = media_create_pad_link(source, source_idx, sink, 0, 0);
> +		if (ret) {
> +			vin_err(vin, "Error adding link from %s to %s\n",
> +				source->name, sink->name);
> +			break;
> +		}
> +	}
> +	mutex_unlock(&vin->group->lock);
> +}
> +
>  static void rvin_csi2_cleanup(struct rvin_dev *vin)
>  {
>  	rvin_group_notifier_cleanup(vin);
> @@ -973,7 +984,7 @@ static int rvin_csi2_init(struct rvin_dev *vin)
>  	if (ret < 0)
>  		return ret;
>
> -	ret = rvin_group_get(vin);
> +	ret = rvin_group_get(vin, rvin_csi2_setup_links);
>  	if (ret)
>  		goto err_controls;
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
> index 39207aaf39ef9391..f2c32d5ceb7f83d9 100644
> --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> @@ -269,6 +269,7 @@ struct rvin_dev {
>   * @count:		number of enabled VIN instances found in DT
>   * @notifier:		group notifier for CSI-2 async subdevices
>   * @vin:		VIN instances which are part of the group
> + * @link_setup:		Callback to create all links for the media graph
>   * @remotes:		array of pairs of fwnode and subdev pointers
>   *			to all remote subdevices.
>   */
> @@ -282,6 +283,8 @@ struct rvin_group {
>  	struct v4l2_async_notifier notifier;
>  	struct rvin_dev *vin[RCAR_VIN_NUM];
>
> +	void (*link_setup)(struct rvin_dev *vin);
> +
>  	struct {
>  		struct v4l2_async_subdev *asd;
>  		struct v4l2_subdev *subdev;
> --
> 2.31.1
>

  reply	other threads:[~2021-07-07 10:33 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-13 18:02 [PATCH 00/11] rcar-vin: Add r8a779a0 support Niklas Söderlund
2021-04-13 18:02 ` [PATCH 01/11] rcar-vin: Refactor controls creation for video device Niklas Söderlund
2021-07-06 16:04   ` Jacopo Mondi
2021-07-06 16:16     ` Niklas Söderlund
2021-07-06 16:58       ` Jacopo Mondi
2021-07-08 13:40         ` Sakari Ailus
2021-07-08 14:05           ` Niklas Söderlund
2021-07-08 14:42             ` Sakari Ailus
2021-07-06 16:08   ` Jacopo Mondi
2021-07-06 16:17     ` Niklas Söderlund
2021-04-13 18:02 ` [PATCH 02/11] rcar-vin: Fix error paths for rvin_mc_init() Niklas Söderlund
2021-07-06 16:09   ` Jacopo Mondi
2021-04-13 18:02 ` [PATCH 03/11] rcar-vin: Improve async notifier cleanup paths Niklas Söderlund
2021-07-06 16:41   ` Jacopo Mondi
2021-04-13 18:02 ` [PATCH 04/11] rcar-vin: Improve reuse of parallel notifier Niklas Söderlund
2021-07-06 16:51   ` Jacopo Mondi
2021-07-07  8:51     ` Niklas Söderlund
2021-04-13 18:02 ` [PATCH 05/11] rcar-vin: Rename array storing subdevice information Niklas Söderlund
2021-07-06 16:53   ` Jacopo Mondi
2021-04-13 18:02 ` [PATCH 06/11] rcar-vin: Move group async notifier Niklas Söderlund
2021-07-06 16:58   ` Jacopo Mondi
2021-04-13 18:02 ` [PATCH 07/11] rcar-vin: Extend group notifier DT parser to work with any port Niklas Söderlund
2021-07-07 10:24   ` Jacopo Mondi
2021-04-13 18:02 ` [PATCH 08/11] rcar-vin: Create a callback to setup media links Niklas Söderlund
2021-07-07 10:33   ` Jacopo Mondi [this message]
2021-07-08 15:46     ` Niklas Söderlund
2021-04-13 18:02 ` [PATCH 09/11] rcar-vin: Specify media device ops at group creation time Niklas Söderlund
2021-07-07 10:40   ` Jacopo Mondi
2021-04-13 18:02 ` [PATCH 10/11] rcar-vin: Move and rename CSI-2 link notifications Niklas Söderlund
2021-07-07 10:46   ` Jacopo Mondi
2021-04-13 18:02 ` [PATCH 11/11] rcar-vin: Add r8a779a0 support Niklas Söderlund
2021-07-07 11:09   ` Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210707103355.wu75k2zskwq2ofy4@uno.localdomain \
    --to=jacopo@jmondi.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).