On 27.07.2021 14:30:22, Lad Prabhakar wrote:
> Add CANFD node to R9A07G044 (RZ/G2L) SoC DTSI.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
>  arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> index 9a7489dc70d1..51655c09f1f8 100644
> --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> @@ -13,6 +13,13 @@
>  	#address-cells = <2>;
>  	#size-cells = <2>;
>  
> +	/* External CAN clock - to be overridden by boards that provide it */
> +	can_clk: can {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <0>;
> +	};
> +
>  	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
>  	extal_clk: extal {
>  		compatible = "fixed-clock";
> @@ -89,6 +96,40 @@
>  			status = "disabled";
>  		};
>  
> +		canfd: can@10050000 {
> +			compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd";
> +			reg = <0 0x10050000 0 0x8000>;
> +			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "g_err", "g_recc",
> +					  "ch0_err", "ch0_rec", "ch0_trx",
> +					  "ch1_err", "ch1_rec", "ch1_trx";
> +			clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>,
> +				 <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>,
> +				 <&can_clk>;
> +			clock-names = "fck", "canfd", "can_clk";
> +			assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>;
> +			assigned-clock-rates = <50000000>;
> +			resets = <&cpg R9A07G044_CANFD_RSTP_N>,
> +				 <&cpg R9A07G044_CANFD_RSTC_N>;
> +			reset-names = "rstp_n", "rstc_n";
> +			power-domains = <&cpg>;
> +			status = "disabled";
> +
> +			channel0 {
> +				status = "disabled";
> +			};
> +			channel1 {
> +				status = "disabled";
> +			};
> +		};
> +
>  		i2c0: i2c@10058000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;

This doesn't apply to net-next/master, the r9a07g044.dtsi doesn't have a
i2c0 node at all. There isn't a i2c0 node in Linus' master branch, yet.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |