From: Biju Das <biju.das.jz@bp.renesas.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: "Biju Das" <biju.das.jz@bp.renesas.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
linux-pwm@vger.kernel.org, "Lee Jones" <lee@kernel.org>,
"Daniel Lezcano" <daniel.lezcano@linaro.org>,
"William Breathitt Gray" <william.gray@linaro.org>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Chris Paterson" <chris.paterson2@renesas.com>,
"Prabhakar Mahadev Lad" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH v14 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
Date: Fri, 10 Mar 2023 17:06:54 +0000 [thread overview]
Message-ID: <20230310170654.268047-7-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20230310170654.268047-1-biju.das.jz@bp.renesas.com>
The RZ/G2L Multi-Function Timer Pulse Unit 3 (a.k.a MTU3a) uses
one counter and two match components to configure duty_cycle
and period to generate PWM output waveform.
Add basic support for RZ/G2L MTU3a PWM driver by creating separate
PWM channels for each IOs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v13->v14:
* Updated commit description
* Updated Limitations section.
* Replaced the macros RZ_MTU*->RZ_MTU3_CHAN_* in probe()
* Fixed a kernel crash in error path by moving rz_mtu3_pwm->chip.dev before
devm_add_action_or_reset()
* Added pm_runtime_idle() and simplified error paths for devm_add_action_or_reset()
and devm_pwmchip_add().
v12->v13:
* Updated commit description
* Moved RZ_MTU3_TMDR1_MD_* macros to rz_mtu3.h
* Updated Limitations section.
* Removed PWM mode1 references from the driver.
* Dropped prescale and duty_cycle from struct rz_mtu3_pwm_chip.
* Replaced rz_mtu3_pwm_mode1_num_ios->rz_mtu3_hw_channel_ios.
* Avoided race condition in rz_mtu3_pwm_request()/rz_mtu3_pwm_free().
* Updated get_state() by adding dc > pv check and added a comment about
overflow condition.
* Moved overflow condition check from config->probe()
* Replaced pm_runtime_resume_and_get with unconditional pm_runtime_get_sync()
in config()
* Added error check for clk_prepare_enable() in probe() and propagating error
to the caller for pm_runtime_resume()
* clk_get_rate() is called after enabling the clock and clk_rate_exclusive_put()
v11->v12:
* Updated header file to <linux/mfd/rz-mtu3.h> as core driver is in MFD.
* Reordered get_state()
v10->v11:
* No change.
v9->v10:
* No change.
v8->v9:
* Added prescale/duty_cycle variables to struct rz_mtu3_pwm_chip and
cached this values in rz_mtu3_pwm_config and used this cached values
in get_state(), if PWM is disabled.
* Added return code for get_state()
v7->v8:
* Simplified rz_mtu3_pwm_request by calling rz_mtu3_request_channel()
* Simplified rz_mtu3_pwm_free by calling rz_mtu3_release_channel()
v6->v7:
* Added channel specific mutex lock to avoid race between counter
device and rz_mtu3_pwm_{request,free}
* Added pm_runtime_resume_and_get in rz_mtu3_pwm_enable()
* Added pm_runtime_put_sync in rz_mtu3_pwm_disable()
* Updated rz_mtu3_pwm_config()
* Updated rz_mtu3_pwm_apply()
v5->v6:
* Updated commit and Kconfig description
* Sorted the header
* Replaced dev_get_drvdata from rz_mtu3_pwm_pm_disable()
* Replaced SET_RUNTIME_PM_OPS->DEFINE_RUNTIME_DEV_PM_OPS and removed
__maybe_unused from suspend/resume()
v4->v5:
* pwm device is instantiated by mtu3a core driver.
v3->v4:
* There is no resource associated with "rz-mtu3-pwm" compatible
and moved the code to mfd subsystem as it binds against "rz-mtu".
* Removed struct platform_driver rz_mtu3_pwm_driver.
v2->v3:
* No change.
v1->v2:
* Modelled as a single PWM device handling multiple channles.
* Used PM framework to manage the clocks.
---
drivers/pwm/Kconfig | 11 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-rz-mtu3.c | 482 ++++++++++++++++++++++++++++++++++++++
3 files changed, 494 insertions(+)
create mode 100644 drivers/pwm/pwm-rz-mtu3.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index dae023d783a2..ccc0299fd0dd 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -481,6 +481,17 @@ config PWM_ROCKCHIP
Generic PWM framework driver for the PWM controller found on
Rockchip SoCs.
+config PWM_RZ_MTU3
+ tristate "Renesas RZ/G2L MTU3a PWM Timer support"
+ depends on RZ_MTU3 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This driver exposes the MTU3a PWM Timer controller found in Renesas
+ RZ/G2L like chips through the PWM API.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-rz-mtu3.
+
config PWM_SAMSUNG
tristate "Samsung PWM support"
depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 7bf1a29f02b8..b85fc9fba326 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_PWM_RASPBERRYPI_POE) += pwm-raspberrypi-poe.o
obj-$(CONFIG_PWM_RCAR) += pwm-rcar.o
obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o
obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o
+obj-$(CONFIG_PWM_RZ_MTU3) += pwm-rz-mtu3.o
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
obj-$(CONFIG_PWM_SIFIVE) += pwm-sifive.o
obj-$(CONFIG_PWM_SL28CPLD) += pwm-sl28cpld.o
diff --git a/drivers/pwm/pwm-rz-mtu3.c b/drivers/pwm/pwm-rz-mtu3.c
new file mode 100644
index 000000000000..146948656755
--- /dev/null
+++ b/drivers/pwm/pwm-rz-mtu3.c
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L MTU3a PWM Timer driver
+ *
+ * Copyright (C) 2022 Renesas Electronics Corporation
+ *
+ * Hardware manual for this IP can be found here
+ * https://www.renesas.com/eu/en/document/mah/rzg2l-group-rzg2lc-group-users-manual-hardware-0?language=en
+ *
+ * Limitations:
+ * - When PWM is disabled, the output is driven to Hi-Z.
+ * - While the hardware supports both polarities, the driver (for now)
+ * only handles normal polarity.
+ * - HW uses one counter and two match components to configure duty_cycle
+ * and period.
+ * - Multi-Function Timer Pulse Unit(a.k.a MTU) has 7 HW channels for PWM
+ * operations(The channels are MTU{0..4, 6, 7}).
+ * - MTU{1, 2} channels have a single IO, whereas all other HW channels have
+ * 2 IOs.
+ * - Each IO is modelled as an independent PWM channel.
+ * - rz_mtu3_hw_channel_ios table is used to map the PWM channel to the
+ * corresponding HW channel as there are difference in number of IOs
+ * between HW channels.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/limits.h>
+#include <linux/mfd/rz-mtu3.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/time.h>
+
+#define RZ_MTU3_TIOR_OC_RETAIN (0)
+#define RZ_MTU3_TIOR_OC_0_H_COMP_MATCH (2)
+#define RZ_MTU3_TIOR_OC_1_TOGGLE (7)
+#define RZ_MTU3_TIOR_OC_IOA GENMASK(3, 0)
+
+#define RZ_MTU3_TCR_CCLR_TGRC (5 << 5)
+#define RZ_MTU3_TCR_CKEG_RISING (0 << 3)
+
+#define RZ_MTU3_TCR_TPCS GENMASK(2, 0)
+
+#define RZ_MTU3_MAX_PWM_CHANNELS (12)
+
+#define RZ_MTU3_MAX_HW_CHANNELS (7)
+
+/* The table represents the number of IOs on each MTU HW channel. */
+static const u8 rz_mtu3_hw_channel_ios[] = { 2, 1, 1, 2, 2, 2, 2 };
+
+/**
+ * struct rz_mtu3_pwm_chip - MTU3 pwm private data
+ *
+ * @chip: MTU3 pwm chip data
+ * @clk: MTU3 module clock
+ * @lock: Lock to prevent concurrent access for usage count
+ * @rate: MTU3 clock rate
+ * @user_count: MTU3 usage count
+ * @rz_mtu3_channel: HW channels for the PWM
+ */
+
+struct rz_mtu3_pwm_chip {
+ struct pwm_chip chip;
+ struct clk *clk;
+ struct mutex lock;
+ unsigned long rate;
+ u32 user_count[RZ_MTU3_MAX_HW_CHANNELS];
+ struct rz_mtu3_channel *ch[RZ_MTU3_MAX_HW_CHANNELS];
+};
+
+static inline struct rz_mtu3_pwm_chip *to_rz_mtu3_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct rz_mtu3_pwm_chip, chip);
+}
+
+static u8 rz_mtu3_pwm_calculate_prescale(struct rz_mtu3_pwm_chip *rz_mtu3,
+ u64 period_cycles)
+{
+ u32 prescaled_period_cycles;
+ u8 prescale;
+
+ prescaled_period_cycles = period_cycles >> 16;
+ if (prescaled_period_cycles >= 16)
+ prescale = 3;
+ else
+ prescale = (fls(prescaled_period_cycles) + 1) / 2;
+
+ return prescale;
+}
+
+static struct rz_mtu3_channel *
+rz_mtu3_get_hw_channel(struct rz_mtu3_pwm_chip *rz_mtu3_pwm, u32 channel)
+{
+ unsigned int i, ch_index = 0;
+
+ for (i = 0; i < ARRAY_SIZE(rz_mtu3_hw_channel_ios); i++) {
+ ch_index += rz_mtu3_hw_channel_ios[i];
+
+ if (ch_index > channel)
+ break;
+ }
+
+ return rz_mtu3_pwm->ch[i];
+}
+
+static u32 rz_mtu3_get_hw_channel_index(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
+ struct rz_mtu3_channel *ch)
+{
+ u32 i;
+
+ for (i = 0; i < ARRAY_SIZE(rz_mtu3_hw_channel_ios); i++) {
+ if (ch == rz_mtu3_pwm->ch[i])
+ break;
+ }
+
+ return i;
+}
+
+static bool rz_mtu3_pwm_is_second_channel(u32 ch_index, u32 hwpwm)
+{
+ u32 i, pwm_ch_index = 0;
+
+ for (i = 0; i < ch_index; i++)
+ pwm_ch_index += rz_mtu3_hw_channel_ios[i];
+
+ return pwm_ch_index != hwpwm;
+}
+
+static bool rz_mtu3_pwm_is_ch_enabled(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
+ u32 hwpwm)
+{
+ struct rz_mtu3_channel *ch;
+ bool is_channel_en;
+ u32 ch_index;
+ u8 val;
+
+ ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, hwpwm);
+ ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
+ is_channel_en = rz_mtu3_is_enabled(ch);
+
+ if (rz_mtu3_pwm_is_second_channel(ch_index, hwpwm))
+ val = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TIORL);
+ else
+ val = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TIORH);
+
+ return (is_channel_en && (val & RZ_MTU3_TIOR_OC_IOA));
+}
+
+static int rz_mtu3_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
+ struct rz_mtu3_channel *ch;
+ u32 ch_index;
+
+ mutex_lock(&rz_mtu3_pwm->lock);
+ ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
+ ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
+ if (!rz_mtu3_pwm->user_count[ch_index] && !rz_mtu3_request_channel(ch)) {
+ mutex_unlock(&rz_mtu3_pwm->lock);
+ return -EBUSY;
+ }
+
+ rz_mtu3_pwm->user_count[ch_index]++;
+ mutex_unlock(&rz_mtu3_pwm->lock);
+
+ return 0;
+}
+
+static void rz_mtu3_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
+ struct rz_mtu3_channel *ch;
+ u32 ch_index;
+
+ mutex_lock(&rz_mtu3_pwm->lock);
+ ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
+ ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
+
+ rz_mtu3_pwm->user_count[ch_index]--;
+ if (!rz_mtu3_pwm->user_count[ch_index])
+ rz_mtu3_release_channel(ch);
+
+ mutex_unlock(&rz_mtu3_pwm->lock);
+}
+
+static int rz_mtu3_pwm_enable(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
+ struct pwm_device *pwm)
+{
+ struct rz_mtu3_channel *ch;
+ u32 ch_index;
+ u8 val;
+ int rc;
+
+ rc = pm_runtime_resume_and_get(rz_mtu3_pwm->chip.dev);
+ if (rc)
+ return rc;
+
+ ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
+ ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
+ val = (RZ_MTU3_TIOR_OC_1_TOGGLE << 4) | RZ_MTU3_TIOR_OC_0_H_COMP_MATCH;
+
+ rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TMDR1, RZ_MTU3_TMDR1_MD_PWMMODE1);
+ if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm))
+ rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORL, val);
+ else
+ rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORH, val);
+
+ if (rz_mtu3_pwm->user_count[ch_index] <= 1)
+ rz_mtu3_enable(ch);
+
+ return 0;
+}
+
+static void rz_mtu3_pwm_disable(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
+ struct pwm_device *pwm)
+{
+ struct rz_mtu3_channel *ch;
+ u32 ch_index;
+
+ ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
+ ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
+
+ /* Return to normal mode and disable output pins of MTU3 channel */
+ if (rz_mtu3_pwm->user_count[ch_index] <= 1)
+ rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TMDR1, RZ_MTU3_TMDR1_MD_NORMAL);
+
+ if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm))
+ rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORL, RZ_MTU3_TIOR_OC_RETAIN);
+ else
+ rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORH, RZ_MTU3_TIOR_OC_RETAIN);
+
+ if (rz_mtu3_pwm->user_count[ch_index] <= 1)
+ rz_mtu3_disable(ch);
+
+ pm_runtime_put_sync(rz_mtu3_pwm->chip.dev);
+}
+
+static int rz_mtu3_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
+ struct rz_mtu3_channel *ch;
+ u8 prescale, val;
+ u32 ch_index;
+ u16 dc, pv;
+ u64 tmp;
+
+ ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
+ ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
+ pm_runtime_get_sync(chip->dev);
+ state->enabled = rz_mtu3_pwm_is_ch_enabled(rz_mtu3_pwm, pwm->hwpwm);
+ if (state->enabled) {
+ val = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TCR);
+ prescale = FIELD_GET(RZ_MTU3_TCR_TPCS, val);
+
+ if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm)) {
+ dc = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRD);
+ pv = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRC);
+ } else {
+ dc = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRB);
+ pv = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRA);
+ }
+
+ /* With prescale <= 7 and pv <= 0xffff this doesn't overflow. */
+ tmp = NSEC_PER_SEC * (u64)pv << (2 * prescale);
+ state->period = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
+ tmp = NSEC_PER_SEC * (u64)dc << (2 * prescale);
+ state->duty_cycle = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
+ }
+
+ if (state->duty_cycle > state->period)
+ state->duty_cycle = state->period;
+
+ state->polarity = PWM_POLARITY_NORMAL;
+ pm_runtime_put(chip->dev);
+
+ return 0;
+}
+
+static int rz_mtu3_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
+ struct rz_mtu3_channel *ch;
+ unsigned long pv, dc;
+ u64 period_cycles;
+ u64 duty_cycles;
+ u32 ch_index;
+ u8 prescale;
+ u8 val;
+
+ ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
+ ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
+ period_cycles = mul_u64_u32_div(state->period, rz_mtu3_pwm->rate,
+ NSEC_PER_SEC);
+ prescale = rz_mtu3_pwm_calculate_prescale(rz_mtu3_pwm, period_cycles);
+
+ if (period_cycles >> (2 * prescale) <= U16_MAX)
+ pv = period_cycles >> (2 * prescale);
+ else
+ pv = U16_MAX;
+
+ duty_cycles = mul_u64_u32_div(state->duty_cycle, rz_mtu3_pwm->rate,
+ NSEC_PER_SEC);
+ if (duty_cycles >> (2 * prescale) <= U16_MAX)
+ dc = duty_cycles >> (2 * prescale);
+ else
+ dc = U16_MAX;
+
+ /*
+ * If the PWM channel is disabled, make sure to turn on the clock
+ * before writing the register.
+ */
+ if (!pwm->state.enabled)
+ pm_runtime_get_sync(chip->dev);
+
+ val = RZ_MTU3_TCR_CKEG_RISING | prescale;
+ if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm)) {
+ rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TCR,
+ RZ_MTU3_TCR_CCLR_TGRC | val);
+ rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRD, dc);
+ rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRC, pv);
+ } else {
+ rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TCR,
+ RZ_MTU3_TCR_CCLR_TGRA | val);
+ rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRB, dc);
+ rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRA, pv);
+ }
+
+ /* If the PWM is not enabled, turn the clock off again to save power. */
+ if (!pwm->state.enabled)
+ pm_runtime_put(chip->dev);
+
+ return 0;
+}
+
+static int rz_mtu3_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
+ bool enabled = pwm->state.enabled;
+ int ret;
+
+ if (state->polarity != PWM_POLARITY_NORMAL)
+ return -EINVAL;
+
+ if (!state->enabled) {
+ if (enabled)
+ rz_mtu3_pwm_disable(rz_mtu3_pwm, pwm);
+
+ return 0;
+ }
+
+ ret = rz_mtu3_pwm_config(chip, pwm, state);
+ if (ret)
+ return ret;
+
+ if (!enabled)
+ ret = rz_mtu3_pwm_enable(rz_mtu3_pwm, pwm);
+
+ return ret;
+}
+
+static const struct pwm_ops rz_mtu3_pwm_ops = {
+ .request = rz_mtu3_pwm_request,
+ .free = rz_mtu3_pwm_free,
+ .get_state = rz_mtu3_pwm_get_state,
+ .apply = rz_mtu3_pwm_apply,
+ .owner = THIS_MODULE,
+};
+
+static int rz_mtu3_pwm_pm_runtime_suspend(struct device *dev)
+{
+ struct rz_mtu3_pwm_chip *rz_mtu3_pwm = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(rz_mtu3_pwm->clk);
+
+ return 0;
+}
+
+static int rz_mtu3_pwm_pm_runtime_resume(struct device *dev)
+{
+ struct rz_mtu3_pwm_chip *rz_mtu3_pwm = dev_get_drvdata(dev);
+
+ return clk_prepare_enable(rz_mtu3_pwm->clk);
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(rz_mtu3_pwm_pm_ops,
+ rz_mtu3_pwm_pm_runtime_suspend,
+ rz_mtu3_pwm_pm_runtime_resume, NULL);
+
+static void rz_mtu3_pwm_pm_disable(void *data)
+{
+ struct rz_mtu3_pwm_chip *rz_mtu3_pwm = data;
+
+ clk_rate_exclusive_put(rz_mtu3_pwm->clk);
+ pm_runtime_disable(rz_mtu3_pwm->chip.dev);
+ pm_runtime_set_suspended(rz_mtu3_pwm->chip.dev);
+}
+
+static int rz_mtu3_pwm_probe(struct platform_device *pdev)
+{
+ struct rz_mtu3 *ddata = dev_get_drvdata(pdev->dev.parent);
+ struct rz_mtu3_pwm_chip *rz_mtu3_pwm;
+ struct device *dev = &pdev->dev;
+ int num_pwm_hw_ch = 0;
+ unsigned int i;
+ int ret;
+
+ rz_mtu3_pwm = devm_kzalloc(&pdev->dev, sizeof(*rz_mtu3_pwm), GFP_KERNEL);
+ if (!rz_mtu3_pwm)
+ return -ENOMEM;
+
+ rz_mtu3_pwm->clk = ddata->clk;
+
+ for (i = 0; i < RZ_MTU_NUM_CHANNELS; i++) {
+ if (i == RZ_MTU3_CHAN_5 || i == RZ_MTU3_CHAN_8)
+ continue;
+
+ rz_mtu3_pwm->ch[num_pwm_hw_ch] = &ddata->channels[i];
+ rz_mtu3_pwm->ch[num_pwm_hw_ch]->dev = dev;
+ num_pwm_hw_ch++;
+ }
+
+ mutex_init(&rz_mtu3_pwm->lock);
+ platform_set_drvdata(pdev, rz_mtu3_pwm);
+ ret = clk_prepare_enable(rz_mtu3_pwm->clk);
+ if (ret)
+ return dev_err_probe(dev, ret, "Clock enable failed\n");
+
+ clk_rate_exclusive_get(rz_mtu3_pwm->clk);
+
+ rz_mtu3_pwm->rate = clk_get_rate(rz_mtu3_pwm->clk);
+ /*
+ * Refuse clk rates > 1 GHz to prevent overflow later for computing
+ * period and duty cycle.
+ */
+ if (rz_mtu3_pwm->rate > NSEC_PER_SEC) {
+ ret = -EINVAL;
+ clk_rate_exclusive_put(rz_mtu3_pwm->clk);
+ goto disable_clock;
+ }
+
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ rz_mtu3_pwm->chip.dev = &pdev->dev;
+ ret = devm_add_action_or_reset(&pdev->dev,
+ rz_mtu3_pwm_pm_disable,
+ rz_mtu3_pwm);
+ if (ret < 0)
+ return ret;
+
+ rz_mtu3_pwm->chip.ops = &rz_mtu3_pwm_ops;
+ rz_mtu3_pwm->chip.npwm = RZ_MTU3_MAX_PWM_CHANNELS;
+ ret = devm_pwmchip_add(&pdev->dev, &rz_mtu3_pwm->chip);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
+
+ pm_runtime_idle(&pdev->dev);
+
+ return 0;
+
+disable_clock:
+ clk_disable_unprepare(rz_mtu3_pwm->clk);
+ return ret;
+}
+
+static struct platform_driver rz_mtu3_pwm_driver = {
+ .driver = {
+ .name = "pwm-rz-mtu3",
+ .pm = pm_ptr(&rz_mtu3_pwm_pm_ops),
+ },
+ .probe = rz_mtu3_pwm_probe,
+};
+module_platform_driver(rz_mtu3_pwm_driver);
+
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_ALIAS("platform:pwm-rz-mtu3");
+MODULE_DESCRIPTION("Renesas RZ/G2L MTU3a PWM Timer Driver");
+MODULE_LICENSE("GPL");
--
2.25.1
next prev parent reply other threads:[~2023-03-10 17:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-10 17:06 [PATCH v14 0/6] Add RZ/G2L MTU3a Core, Counter and pwm driver Biju Das
2023-03-10 17:06 ` [PATCH v14 1/6] dt-bindings: timer: Document RZ/G2L MTU3a bindings Biju Das
2023-03-10 17:06 ` [PATCH v14 2/6] mfd: Add Renesas RZ/G2L MTU3a core driver Biju Das
2023-03-16 15:58 ` Lee Jones
2023-03-16 16:04 ` Biju Das
2023-03-29 20:54 ` Uwe Kleine-König
2023-03-30 10:56 ` Lee Jones
2023-03-30 12:30 ` Uwe Kleine-König
2023-03-10 17:06 ` [PATCH v14 3/6] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select Biju Das
2023-03-10 17:06 ` [PATCH v14 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver Biju Das
2023-03-10 17:06 ` [PATCH v14 5/6] MAINTAINERS: Add entries for " Biju Das
2023-03-10 17:06 ` Biju Das [this message]
2023-03-23 15:48 ` [PATCH v14 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver Biju Das
2023-03-27 20:40 ` Uwe Kleine-König
2023-03-29 17:40 ` Biju Das
2023-03-29 20:51 ` Uwe Kleine-König
2023-03-30 11:04 ` Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230310170654.268047-7-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=chris.paterson2@renesas.com \
--cc=daniel.lezcano@linaro.org \
--cc=geert+renesas@glider.be \
--cc=lee@kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=william.gray@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).