From: Biju Das <biju.das.jz@bp.renesas.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Thierry Reding <thierry.reding@gmail.com>
Cc: "Biju Das" <biju.das.jz@bp.renesas.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Magnus Damm" <magnus.damm@gmail.com>,
linux-pwm@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-gpio@vger.kernel.org,
"Prabhakar Mahadev Lad" <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [DO NOT APPLY PATCH v7 10/10] tools/poeg: Add test app for poeg
Date: Tue, 28 Mar 2023 11:10:11 +0100 [thread overview]
Message-ID: <20230328101011.185594-11-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20230328101011.185594-1-biju.das.jz@bp.renesas.com>
Add test app for poeg
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
tools/poeg/Build | 1 +
tools/poeg/Makefile | 53 ++++++++++++++++++++++
tools/poeg/poeg_app.c | 102 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 156 insertions(+)
create mode 100644 tools/poeg/Build
create mode 100644 tools/poeg/Makefile
create mode 100644 tools/poeg/poeg_app.c
diff --git a/tools/poeg/Build b/tools/poeg/Build
new file mode 100644
index 000000000000..f960920a4afb
--- /dev/null
+++ b/tools/poeg/Build
@@ -0,0 +1 @@
+poeg_app-y += poeg_app.o
diff --git a/tools/poeg/Makefile b/tools/poeg/Makefile
new file mode 100644
index 000000000000..669c914d9c98
--- /dev/null
+++ b/tools/poeg/Makefile
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+include ../scripts/Makefile.include
+
+bindir ?= /usr/bin
+
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(CURDIR)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+endif
+
+# Do not use make's built-in rules
+# (this improves performance and avoids hard-to-debug behaviour);
+MAKEFLAGS += -r
+
+override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
+
+ALL_TARGETS := poeg_app
+ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
+
+all: $(ALL_PROGRAMS)
+
+export srctree OUTPUT CC LD CFLAGS
+include $(srctree)/tools/build/Makefile.include
+
+#
+# We need the following to be outside of kernel tree
+#
+$(OUTPUT)include/linux/poeg.h: ../../include/linux/pinctrl/rzg2l-poeg.h
+ mkdir -p $(OUTPUT)include/linux 2>&1 || true
+ ln -sf $(CURDIR)/../../include/linux/pinctrl/rzg2l-poeg.h $@
+
+prepare: $(OUTPUT)include/linux/poeg.h
+
+POEG_EXAMPLE := $(OUTPUT)poeg_app.o
+$(POEG_EXAMPLE): prepare FORCE
+ $(Q)$(MAKE) $(build)=poeg_app
+$(OUTPUT)poeg_app: $(POEG_EXAMPLE)
+ $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
+
+clean:
+ rm -f $(ALL_PROGRAMS)
+ rm -rf $(OUTPUT)include/linux/poeg.h
+ find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete
+
+install: $(ALL_PROGRAMS)
+ install -d -m 755 $(DESTDIR)$(bindir); \
+ for program in $(ALL_PROGRAMS); do \
+ install $$program $(DESTDIR)$(bindir); \
+ done
+
+FORCE:
+
+.PHONY: all install clean FORCE prepare
diff --git a/tools/poeg/poeg_app.c b/tools/poeg/poeg_app.c
new file mode 100644
index 000000000000..273ae1813e2f
--- /dev/null
+++ b/tools/poeg/poeg_app.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * POEG - example userspace application
+ * Copyright (C) 2023 Biju Das
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sys/ioctl.h>
+#include <linux/ioctl.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <poll.h>
+
+#include <linux/poeg.h>
+
+#define USER_CTRL 1
+#define GPT_CTRL 0
+#define EXT_PIN_CTRL 0
+
+int main(int argc, char *arg[])
+{
+ struct poeg_cmd cmd;
+ int ret, fd;
+#if GPT_CTRL
+ struct poeg_event event_data;
+ unsigned int val;
+ int i;
+#endif
+
+ fd = open("/dev/poeg3", O_RDWR);
+ if (fd < 0)
+ perror("open");
+ else
+ printf("[POEG]open\n");
+
+#if USER_CTRL
+ cmd.val = RZG2L_POEG_USR_CTRL_ENABLE_CMD;
+ cmd.channel = 4;
+ printf("[POEG] user control pin output disable enabled\n");
+ ret = write(fd, &cmd, sizeof(cmd));
+ if (ret == -1) {
+ perror("Failed to write cmd data");
+ return 1;
+ }
+ sleep(3);
+
+ printf("[POEG] user control pin output disable disabled\n");
+ cmd.val = RZG2L_POEG_USR_CTRL_DISABLE_CMD;
+ cmd.channel = 4;
+ ret = write(fd, &cmd, sizeof(cmd));
+ if (ret == -1) {
+ perror("Failed to write cmd data");
+ return 1;
+ }
+#endif
+
+#if GPT_CTRL
+ printf("[POEG] GPT control configure IRQ\n");
+ cmd.val = RZG2L_POEG_GPT_CFG_IRQ_CMD;
+ cmd.channel = 4;
+ ret = write(fd, &cmd, sizeof(cmd));
+ if (ret == -1) {
+ perror("Failed to write cmd data");
+ return 1;
+ }
+
+ for (;;) {
+ ret = read(fd, &event_data, sizeof(event_data));
+ if (ret == -1) {
+ perror("Failed to read event data");
+ return 1;
+ }
+
+ val = event_data.gpt_disable_irq_status;
+ if (val) {
+ /* emulate fault clearing condition by adding delay */
+ sleep(2);
+ for (i = 0; i < 8; i++) {
+ if (val & 7) {
+ printf("gpt ch:%u, irq=%x\n", i, val & 7);
+ cmd.val = RZG2L_POEG_GPT_FAULT_CLR_CMD;
+ cmd.channel = 4;
+ ret = write(fd, &cmd, sizeof(cmd));
+ }
+ val >>= 3;
+ }
+ }
+ }
+#endif
+
+ if (close(fd) != 0)
+ perror("close");
+ else
+ printf("[POEG]close\n");
+
+ return 0;
+}
--
2.25.1
prev parent reply other threads:[~2023-03-28 10:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-28 10:10 [PATCH v7 00/10] Add RZ/G2L POEG support Biju Das
2023-03-28 10:10 ` [PATCH v7 01/10] dt-bindings: pinctrl: rzg2l-poeg: Document renesas,poeg-config property Biju Das
2023-03-31 9:48 ` Linus Walleij
2023-03-31 12:11 ` Geert Uytterhoeven
2023-04-03 20:39 ` Rob Herring
2023-03-28 10:10 ` [PATCH v7 02/10] drivers: pinctrl: renesas: Add RZ/G2L POEG driver support Biju Das
2023-03-28 10:10 ` [DO NOT APPLY PATCH v7 03/10] pwm: rzg2l-gpt: Add support for output disable request from gpt Biju Das
2023-03-28 10:10 ` [DO NOT APPLY PATCH v7 04/10] pinctrl: renesas: rzg2l-poeg: Add support for GPT Output-Disable Request Biju Das
2023-03-28 10:10 ` [DO NOT APPLY PATCH v7 05/10] pwm: rzg2l-gpt: Add support for output disable when both output low Biju Das
2023-03-28 10:10 ` [DO NOT APPLY PATCH v7 06/10] pinctrl: renesas: rzg2l-poeg: output-disable request from GPT when both outputs are low Biju Das
2023-03-28 10:10 ` [DO NOT APPLY PATCH v7 07/10] pwm: rzg2l-gpt: Add support for output disable on dead time error Biju Das
2023-03-28 10:10 ` [DO NOT APPLY PATCH v7 08/10] pinctrl: renesas: rzg2l-poeg: output-disable request from GPT " Biju Das
2023-03-28 10:10 ` [DO NOT APPLY PATCH v7 09/10] pinctrl: renesas: rzg2l-poeg: output-disable request by external pin Biju Das
2023-03-28 10:10 ` Biju Das [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230328101011.185594-11-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).