From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 68F50C77B71 for ; Fri, 31 Mar 2023 11:34:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231609AbjCaLe2 (ORCPT ); Fri, 31 Mar 2023 07:34:28 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45362 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230501AbjCaLeX (ORCPT ); Fri, 31 Mar 2023 07:34:23 -0400 Received: from relmlie6.idc.renesas.com (relmlor2.renesas.com [210.160.252.172]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id EA73C1DF82; Fri, 31 Mar 2023 04:34:00 -0700 (PDT) X-IronPort-AV: E=Sophos;i="5.98,307,1673881200"; d="scan'208";a="157862793" Received: from unknown (HELO relmlir6.idc.renesas.com) ([10.200.68.152]) by relmlie6.idc.renesas.com with ESMTP; 31 Mar 2023 20:34:00 +0900 Received: from localhost.localdomain (unknown [10.226.93.148]) by relmlir6.idc.renesas.com (Postfix) with ESMTP id 7D50B436D614; Fri, 31 Mar 2023 20:33:57 +0900 (JST) From: Biju Das To: Greg Kroah-Hartman Cc: Biju Das , Jiri Slaby , Geert Uytterhoeven , Yoshinori Sato , linux-serial@vger.kernel.org, Prabhakar Mahadev Lad , linux-renesas-soc@vger.kernel.org, stable@vger.kernel.org Subject: [PATCH v3 3/5] tty: serial: sh-sci: Fix TE setting on SCI IP Date: Fri, 31 Mar 2023 12:33:44 +0100 Message-Id: <20230331113346.170602-4-biju.das.jz@bp.renesas.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230331113346.170602-1-biju.das.jz@bp.renesas.com> References: <20230331113346.170602-1-biju.das.jz@bp.renesas.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org As per the RZ/G2L users hardware manual (Rev.1.20 Sep, 2022), section 23.3.7 Serial Data Transmission (Asynchronous Mode) it is mentioned that the TE (transmit enable) must be set after setting TIE (transmit interrupt enable) or these 2 bits are set to 1 simultaneously by a single instruction. So set these 2 bits in single instruction. Fixes: 93bcefd4c6ba ("serial: sh-sci: Fix setting SCSCR_TIE while transferring data") Cc: stable@vger.kernel.org Signed-off-by: Biju Das --- v3: * New patch moved here from Renesas SCI fixes patch series * Updated commit description * Moved handling of clearing TE bit as separate patch#5. --- drivers/tty/serial/sh-sci.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 15743c2f3d3d..32f5c1f7d697 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -601,6 +601,15 @@ static void sci_start_tx(struct uart_port *port) port->type == PORT_SCIFA || port->type == PORT_SCIFB) { /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ ctrl = serial_port_in(port, SCSCR); + + /* + * For SCI, TE (transmit enable) must be set after setting TIE + * (transmit interrupt enable) or in the same instruction to start + * the transmit process. + */ + if (port->type == PORT_SCI) + ctrl |= SCSCR_TE; + serial_port_out(port, SCSCR, ctrl | SCSCR_TIE); } } @@ -2600,8 +2609,14 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_set_mctrl(port, port->mctrl); } - scr_val |= SCSCR_RE | SCSCR_TE | - (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)); + /* + * For SCI, TE (transmit enable) must be set after setting TIE + * (transmit interrupt enable) or in the same instruction to + * start the transmitting process. So skip setting TE here for SCI. + */ + if (port->type != PORT_SCI) + scr_val |= SCSCR_TE; + scr_val |= SCSCR_RE | (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)); serial_port_out(port, SCSCR, scr_val | s->hscif_tot); if ((srr + 1 == 5) && (port->type == PORT_SCIFA || port->type == PORT_SCIFB)) { -- 2.25.1