From: Biju Das <biju.das.jz@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Subject: [PATCH v6 04/11] arm64: dts: renesas: rzg2l-smarc-som: Enable PMIC and built-in RTC
Date: Fri, 2 Jun 2023 15:24:19 +0100 [thread overview]
Message-ID: <20230602142426.438375-5-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20230602142426.438375-1-biju.das.jz@bp.renesas.com>
Enable PMIC RAA215300 and the built-in RTC on the RZ/{G2L,V2L} SMARC
EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v5->v6:
* Replaced "clock-xtal"->"x2-clock" for x2 node.
* Sorted nodes in alphabetical order.
v4->v5:
* No change.
v3->v4:
* Added clock nodes.
v2->v3:
* No change.
RFC->V2:
* Updated pmic device node based on the bindings.
---
.../boot/dts/renesas/rzg2l-smarc-som.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index fbbb4f03440b..aed0a9ca7f29 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -73,6 +73,13 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
regulator-always-on;
};
+
+ /* 32.768kHz crystal */
+ x2: x2-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
&adc {
@@ -148,6 +155,17 @@ &gpu {
mali-supply = <®_1p1v>;
};
+&i2c3 {
+ raa215300: pmic@12 {
+ compatible = "renesas,raa215300";
+ reg = <0x12>, <0x6f>;
+ reg-names = "main", "rtc";
+
+ clocks = <&x2>;
+ clock-names = "xin";
+ };
+};
+
&ostm1 {
status = "okay";
};
--
2.25.1
next prev parent reply other threads:[~2023-06-02 14:25 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-02 14:24 [PATCH v6 00/11] Add Renesas PMIC RAA215300 and built-in RTC support Biju Das
2023-06-02 14:24 ` [PATCH v6 01/11] i2c: Enhance i2c_new_ancillary_device API Biju Das
2023-06-02 14:24 ` [PATCH v6 02/11] regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings Biju Das
2023-06-02 14:24 ` [PATCH v6 03/11] regulator: Add Renesas PMIC RAA215300 driver Biju Das
2023-06-02 14:24 ` Biju Das [this message]
2023-06-02 14:24 ` [PATCH v6 05/11] dt-bindings: rtc: isl1208: Convert to json-schema Biju Das
2023-06-09 6:42 ` Biju Das
2023-06-09 13:48 ` Alexandre Belloni
2023-06-09 14:03 ` Conor Dooley
2023-06-09 7:48 ` Trent Piepho
2023-06-09 7:58 ` Biju Das
2023-06-02 14:24 ` [PATCH v6 06/11] dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties Biju Das
2023-06-02 14:24 ` [PATCH v6 07/11] rtc: isl1208: Drop name variable Biju Das
2023-06-02 14:24 ` [PATCH v6 08/11] rtc: isl1208: Make similar I2C and DT-based matching table Biju Das
2023-06-02 14:24 ` [PATCH v6 09/11] rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[] Biju Das
2023-06-02 14:24 ` [PATCH v6 10/11] rtc: isl1208: Add isl1208_set_xtoscb() Biju Das
2023-06-05 11:52 ` Geert Uytterhoeven
2023-06-05 12:20 ` Biju Das
2023-06-09 8:08 ` Trent Piepho
2023-06-09 8:47 ` Biju Das
2023-06-02 14:24 ` [PATCH v6 11/11] rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300 Biju Das
2023-06-05 11:56 ` Geert Uytterhoeven
2023-06-05 12:22 ` Biju Das
2023-06-05 13:04 ` [PATCH v6 00/11] Add Renesas PMIC RAA215300 and built-in RTC support Alexandre Belloni
2023-06-05 13:09 ` Biju Das
2023-06-05 13:10 ` Mark Brown
2023-06-05 13:27 ` Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230602142426.438375-5-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).