From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Subject: [PATCH v2 05/10] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G Date: Mon, 19 Jul 2021 17:38:36 +0200 [thread overview] Message-ID: <2a6cc94d27cd87e0231d15c39c5f7cff1e751834.1626708063.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1626708063.git.geert+renesas@glider.be> Add support for the Renesas Salvator-X 2nd version development board equipped with an R-Car H3e-2G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- v2: - Add Reviewed-by. --- arch/arm64/boot/dts/renesas/Makefile | 2 + .../boot/dts/renesas/r8a779m1-salvator-xs.dts | 53 +++++++++++++++++++ 2 files changed, 55 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 68e30e26564b1276..741801e0ec28da63 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -63,4 +63,6 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb + dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts new file mode 100644 index 0000000000000000..084b75b046802339 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car H3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77951-salvator-xs.dts + * Copyright (C) 2015-2017 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779m1.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a779m1"; + compatible = "renesas,salvator-xs", "renesas,r8a779m1", + "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&versaclock6 1>, + <&x21_clk>, + <&x22_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; -- 2.25.1
next prev parent reply other threads:[~2021-07-19 15:59 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-19 15:38 [PATCH v2 00/10] arm64: renesas: Add support for R Car H3e 2G-and M3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 01/10] dt-bindings: arm: renesas: Document R-Car H3e-2G and M3e-2G SoCs and boards Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 02/10] soc: renesas: Identify R-Car H3e-2G and M3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 03/10] arm64: dts: renesas: Add Renesas R8A779M1 SoC support Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 04/10] arm64: dts: renesas: Add Renesas R8A779M3 " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven [this message] 2021-07-19 15:38 ` [PATCH v2 06/10] arm64: dts: renesas: Add support for H3ULCB with R-Car H3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 07/10] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 08/10] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 09/10] arm64: dts: renesas: Add support for M3ULCB " Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 10/10] arm64: dts: renesas: Add support for M3ULCB+Kingfisher " Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=2a6cc94d27cd87e0231d15c39c5f7cff1e751834.1626708063.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=devicetree@vger.kernel.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=yoshihiro.shimoda.uh@renesas.com \ --subject='Re: [PATCH v2 05/10] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).