linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: niklas.soderlund+renesas@ragnatech.se,
	kieran.bingham@ideasonboard.com, linux-media@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH 3/5] media: adv748x: Store the source subdevice in TX
Date: Thu, 13 Dec 2018 11:29:24 +0200	[thread overview]
Message-ID: <3458994.7daZaNYgSu@avalon> (raw)
In-Reply-To: <1544541373-30044-4-git-send-email-jacopo+renesas@jmondi.org>

Hi Jacopo,

Thank you for the patch.

On Tuesday, 11 December 2018 17:16:11 EET Jacopo Mondi wrote:
> The power_up_tx() procedure needs to set a few registers conditionally to
> the selected video source, but it currently checks for the provided tx to
> be either TXA or TXB.
> 
> With the introduction of dynamic routing between HDMI and AFE entities to
> TXA, checking which TX the function is operating on is not meaningful
> anymore.
> 
> To fix this, store the subdevice of the source providing video data to the
> CSI-2 TX in the 'struct adv748x_csi2' representing the TX and check on it.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/media/i2c/adv748x/adv748x-core.c | 2 +-
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 3 +++
>  drivers/media/i2c/adv748x/adv748x.h      | 1 +
>  3 files changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c
> b/drivers/media/i2c/adv748x/adv748x-core.c index 5495dc7891e8..f3aabbccdfb5
> 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -254,7 +254,7 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
>  	adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
> 
>  	/* ADI Required Write */
> -	if (is_txa(tx)) {
> +	if (tx->rsd == &state->hdmi.sd) {
>  		adv748x_write_check(state, page, 0xdb, 0x10, &ret);
>  		adv748x_write_check(state, page, 0xd6, 0x07, &ret);
>  	} else {
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c
> b/drivers/media/i2c/adv748x/adv748x-csi2.c index 4d1aefc2c8d0..307966f4c736
> 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -46,6 +46,9 @@ static int adv748x_csi2_register_link(struct adv748x_csi2
> *tx, return ret;
>  	}
> 
> +	if (flags & MEDIA_LNK_FL_ENABLED)
> +		tx->rsd = src;
> +
>  	return media_create_pad_link(&src->entity, src_pad,
>  				     &tx->sd.entity, ADV748X_CSI2_SINK,
>  				     flags);
> diff --git a/drivers/media/i2c/adv748x/adv748x.h
> b/drivers/media/i2c/adv748x/adv748x.h index b482c7fe6957..387002d6da65
> 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -85,6 +85,7 @@ struct adv748x_csi2 {
>  	struct v4l2_ctrl_handler ctrl_hdl;
>  	struct v4l2_ctrl *pixel_rate;
>  	struct v4l2_subdev sd;
> +	struct v4l2_subdev *rsd;

How about naming this source instead of rsd ? rsd is a bit cryptic.

With that change,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>  };
> 
>  #define notifier_to_csi2(n) container_of(n, struct adv748x_csi2, notifier)

-- 
Regards,

Laurent Pinchart




  parent reply	other threads:[~2018-12-13  9:28 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-11 15:16 [PATCH 0/5] media: adv748x: Implement dynamic routing support Jacopo Mondi
2018-12-11 15:16 ` [PATCH 1/5] media: adv748x: Rework reset procedure Jacopo Mondi
2018-12-11 23:52   ` Kieran Bingham
2018-12-12  8:16     ` jacopo mondi
2018-12-12 10:13       ` Kieran Bingham
2018-12-13  9:15         ` Laurent Pinchart
2018-12-11 15:16 ` [PATCH 2/5] media: adv748x: csi2: Link AFE with TXA and TXB Jacopo Mondi
2018-12-11 23:07   ` Kieran Bingham
2018-12-12  8:21     ` jacopo mondi
2018-12-12 10:19       ` Kieran Bingham
2018-12-13  9:25       ` Laurent Pinchart
2018-12-11 15:16 ` [PATCH 3/5] media: adv748x: Store the source subdevice in TX Jacopo Mondi
2018-12-11 23:19   ` Kieran Bingham
2018-12-13  9:29   ` Laurent Pinchart [this message]
2018-12-11 15:16 ` [PATCH 4/5] media: adv748x: Store the TX sink in HDMI/AFE Jacopo Mondi
2018-12-11 23:24   ` Kieran Bingham
2018-12-13  9:34   ` Laurent Pinchart
2018-12-11 15:16 ` [PATCH 5/5] media: adv748x: Implement link_setup callback Jacopo Mondi
2018-12-11 23:43   ` Kieran Bingham
2018-12-12  8:27     ` jacopo mondi
2018-12-12 10:30       ` Kieran Bingham
2018-12-13  9:40   ` Laurent Pinchart
2018-12-27 20:38     ` Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3458994.7daZaNYgSu@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).