From: Simon Horman <horms+renesas@verge.net.au>
To: linux-renesas-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Magnus Damm <magnus.damm@gmail.com>,
Cao Van Dong <cv-dong@jinso.co.jp>,
Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH 10/21] ARM: dts: r8a77470: Add PWM support
Date: Fri, 19 Apr 2019 16:34:37 +0200 [thread overview]
Message-ID: <3d59e55ef864f5b42bac865912df4aad56d7a67e.1555655522.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1555655522.git.horms+renesas@verge.net.au>
From: Cao Van Dong <cv-dong@jinso.co.jp>
Add pwm{0|1|2|3|4|5|6} nodes to dtsi for PWM support on the
RZ/G1C (r8a77470) SoC.
Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 70 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 60bd79fc35f7..c9f6e6b11e24 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -636,6 +636,76 @@
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
--
2.11.0
next prev parent reply other threads:[~2019-04-19 18:22 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-19 14:34 [GIT PULL] Renesas ARM Based SoC DT Updates for v5.2 Simon Horman
2019-04-19 14:34 ` [PATCH 01/21] ARM: dts: r8a7792: blanche: Add IIC3 and DA9063 PMIC node Simon Horman
2019-04-19 14:34 ` [PATCH 02/21] ARM: dts: alt: Add " Simon Horman
2019-04-19 14:34 ` [PATCH 03/21] ARM: dts: ape6evm: Add NOR FLASH Simon Horman
2019-04-19 14:34 ` [PATCH 04/21] ARM: dts: r8a77470: Add DU support Simon Horman
2019-04-19 14:34 ` [PATCH 05/21] ARM: dts: iwg23s-sbc: Add HDMI support Simon Horman
2019-04-19 14:34 ` [PATCH 06/21] ARM: dts: rskrza1: Add I2C support Simon Horman
2019-04-19 14:34 ` [PATCH 07/21] ARM: dts: rskrza1: Add remaining LEDs Simon Horman
2019-04-19 14:34 ` [PATCH 08/21] ARM: dts: alt: Enable USB support Simon Horman
2019-04-19 14:34 ` [PATCH 09/21] ARM: dts: r8a77470: Add HSCIF support Simon Horman
2019-04-19 14:34 ` Simon Horman [this message]
2019-04-30 13:01 ` [PATCH 10/21] ARM: dts: r8a77470: Add PWM support Geert Uytterhoeven
2019-04-19 14:34 ` [PATCH 11/21] ARM: dts: r8a77470: Add VIN support Simon Horman
2019-04-19 14:34 ` [PATCH 12/21] ARM: dts: r8a77470: Add USB PHY DT support Simon Horman
2019-04-19 14:34 ` [PATCH 13/21] ARM: dts: iwg23s-sbc: Enable USB Phy[01] Simon Horman
2019-04-19 14:34 ` [PATCH 14/21] ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device Simon Horman
2019-04-19 14:34 ` [PATCH 15/21] ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host Simon Horman
2019-04-19 14:34 ` [PATCH 16/21] ARM: dts: r8a77470: Add HSUSB device nodes Simon Horman
2019-04-19 14:34 ` [PATCH 17/21] ARM: dts: iwg23s-sbc: Enable HS-USB Simon Horman
2019-04-19 14:34 ` [PATCH 18/21] ARM: dts: kzm9d: Add rw parameter to bootargs Simon Horman
2019-04-19 14:34 ` [PATCH 19/21] ARM: dts: bockw: Reorder bootargs Simon Horman
2019-04-19 14:34 ` [PATCH 20/21] ARM: dts: marzen: Add rw to bootargs and use ip=dhcp Simon Horman
2019-04-19 14:34 ` [PATCH 21/21] ARM: dts: ape6evm: Reorder bootargs Simon Horman
2019-04-28 19:46 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v5.2 Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3d59e55ef864f5b42bac865912df4aad56d7a67e.1555655522.git.horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=cv-dong@jinso.co.jp \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).