From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <SRS0=6nl3=XH=vger.kernel.org=linux-renesas-soc-owner@kernel.org>
X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
	aws-us-west-2-korg-lkml-1.web.codeaurora.org
X-Spam-Level: 
X-Spam-Status: No, score=-8.6 required=3.0 tests=DKIM_SIGNED,DKIM_VALID,
	DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI,
	SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_SANE_1
	autolearn=ham autolearn_force=no version=3.4.0
Received: from mail.kernel.org (mail.kernel.org [198.145.29.99])
	by smtp.lore.kernel.org (Postfix) with ESMTP id D1B19C49ED9
	for <linux-renesas-soc@archiver.kernel.org>; Thu, 12 Sep 2019 09:49:47 +0000 (UTC)
Received: from vger.kernel.org (vger.kernel.org [209.132.180.67])
	by mail.kernel.org (Postfix) with ESMTP id 87D0920CC7
	for <linux-renesas-soc@archiver.kernel.org>; Thu, 12 Sep 2019 09:49:47 +0000 (UTC)
Authentication-Results: mail.kernel.org;
	dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="kvQT9N/W"
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1730845AbfILJtr (ORCPT
        <rfc822;linux-renesas-soc@archiver.kernel.org>);
        Thu, 12 Sep 2019 05:49:47 -0400
Received: from perceval.ideasonboard.com ([213.167.242.64]:53612 "EHLO
        perceval.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1730618AbfILJtq (ORCPT
        <rfc822;linux-renesas-soc@vger.kernel.org>);
        Thu, 12 Sep 2019 05:49:46 -0400
Received: from [192.168.0.20] (cpc89242-aztw30-2-0-cust488.18-1.cable.virginm.net [86.31.129.233])
        by perceval.ideasonboard.com (Postfix) with ESMTPSA id 774C533A;
        Thu, 12 Sep 2019 11:49:42 +0200 (CEST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com;
        s=mail; t=1568281783;
        bh=6Pbbn3/gffTKlTOgKCw3MuZrLUFCBKButs3GZALrlwU=;
        h=Reply-To:Subject:To:Cc:References:From:Date:In-Reply-To:From;
        b=kvQT9N/WieUqoBYqaQ1URV68Oy+AgH8G/e7rv2/MnPKWOJeEhtTNkF9fZ6piM6pbh
         Poryrneolwf/hZoMhVyeCzyWYHZJZgUrWUFxs+kSY/53THpJxUc+JmtDRo1DLyj80f
         Dc74HwOMPKhbG/Jpqd25DDlC181mvbtILT4bJxlo=
Reply-To: kieran.bingham+renesas@ideasonboard.com
Subject: Re: [PATCH v4 3/9] drm: rcar-du: Add support for CMM
To:     Jacopo Mondi <jacopo@jmondi.org>
Cc:     Jacopo Mondi <jacopo+renesas@jmondi.org>,
        laurent.pinchart@ideasonboard.com, geert@linux-m68k.org,
        horms@verge.net.au, uli+renesas@fpond.eu,
        VenkataRajesh.Kalakodima@in.bosch.com, airlied@linux.ie,
        daniel@ffwll.ch, koji.matsuoka.xm@renesas.com, muroya@ksk.co.jp,
        Harsha.ManjulaMallikarjun@in.bosch.com,
        linux-renesas-soc@vger.kernel.org, dri-devel@lists.freedesktop.org,
        linux-kernel@vger.kernel.org
References: <20190906135436.10622-1-jacopo+renesas@jmondi.org>
 <20190906135436.10622-4-jacopo+renesas@jmondi.org>
 <d46b0e1b-d0a8-3e6b-41e5-029bf07c2cae@ideasonboard.com>
 <20190912075921.bslnfwmco7rhmowz@uno.localdomain>
From:   Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Organization: Ideas on Board
Message-ID: <85405e76-f8f3-bae9-0ff5-8ab9810b0c4d@ideasonboard.com>
Date:   Thu, 12 Sep 2019 10:49:39 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
 Thunderbird/60.8.0
MIME-Version: 1.0
In-Reply-To: <20190912075921.bslnfwmco7rhmowz@uno.localdomain>
Content-Type: text/plain; charset=utf-8
Content-Language: en-GB
Content-Transfer-Encoding: 7bit
Sender: linux-renesas-soc-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-renesas-soc.vger.kernel.org>
X-Mailing-List: linux-renesas-soc@vger.kernel.org

Hi Jacopo,

On 12/09/2019 08:59, Jacopo Mondi wrote:
> Hi Kiernan,
>    thanks for review
> 
> On Wed, Sep 11, 2019 at 04:54:58PM +0100, Kieran Bingham wrote:
>> Hi Jacopo,
>>
>> <This time replying to the mail with ML's included Doh!>
>>
>> On 06/09/2019 14:43, Jacopo Mondi wrote:
>>> Add a driver for the R-Car Display Unit Color Correction Module.
>>>
>>> In most of Gen3 SoCs, each DU output channel is provided with a CMM unit
>>> to perform image enhancement and color correction.
>>>
>>> Add support for CMM through a driver that supports configuration of
>>> the 1-dimensional LUT table. More advanced CMM feature will be
>>
>> s/feature/features/
>>
>>> implemented on top of this basic one.
>>
>> s/basic/initial/
>>
>>>
>>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>>> ---
>>>  drivers/gpu/drm/rcar-du/Kconfig    |   7 +
>>>  drivers/gpu/drm/rcar-du/Makefile   |   1 +
>>>  drivers/gpu/drm/rcar-du/rcar_cmm.c | 251 +++++++++++++++++++++++++++++
>>>  drivers/gpu/drm/rcar-du/rcar_cmm.h |  61 +++++++
>>>  4 files changed, 320 insertions(+)
>>>  create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c
>>>  create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h
>>>
>>> diff --git a/drivers/gpu/drm/rcar-du/Kconfig
>> b/drivers/gpu/drm/rcar-du/Kconfig
>>> index 1529849e217e..539d232790d1 100644
>>> --- a/drivers/gpu/drm/rcar-du/Kconfig
>>> +++ b/drivers/gpu/drm/rcar-du/Kconfig
>>> @@ -13,6 +13,13 @@ config DRM_RCAR_DU
>>>  	  Choose this option if you have an R-Car chipset.
>>>  	  If M is selected the module will be called rcar-du-drm.
>>>
>>> +config DRM_RCAR_CMM
>>> +	bool "R-Car DU Color Management Module (CMM) Support"
>>> +	depends on DRM && OF
>>> +	depends on DRM_RCAR_DU
>>> +	help
>>> +	  Enable support for R-Car Color Management Module (CMM).
>>> +
>>>  config DRM_RCAR_DW_HDMI
>>>  	tristate "R-Car DU Gen3 HDMI Encoder Support"
>>>  	depends on DRM && OF
>>> diff --git a/drivers/gpu/drm/rcar-du/Makefile
>> b/drivers/gpu/drm/rcar-du/Makefile
>>> index 6c2ed9c46467..4d1187ccc3e5 100644
>>> --- a/drivers/gpu/drm/rcar-du/Makefile
>>> +++ b/drivers/gpu/drm/rcar-du/Makefile
>>> @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_of.o \
>>>  rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
>>>  rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o
>>>
>>> +obj-$(CONFIG_DRM_RCAR_CMM)		+= rcar_cmm.o
>>>  obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
>>>  obj-$(CONFIG_DRM_RCAR_DW_HDMI)		+= rcar_dw_hdmi.o
>>>  obj-$(CONFIG_DRM_RCAR_LVDS)		+= rcar_lvds.o
>>> diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c
>> b/drivers/gpu/drm/rcar-du/rcar_cmm.c
>>> new file mode 100644
>>> index 000000000000..3cacdc4474c7
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c
>>> @@ -0,0 +1,251 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * rcar_cmm.c -- R-Car Display Unit Color Management Module
>>> + *
>>> + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org>
>>> + */
>>> +
>>> +#include <linux/io.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/pm_runtime.h>
>>> +
>>> +#include <drm/drm_color_mgmt.h>
>>> +
>>> +#include "rcar_cmm.h"
>>> +
>>> +#define CM2_LUT_CTRL		0x0000
>>> +#define CM2_LUT_CTRL_LUT_EN	BIT(0)
>>
>> I'd have a new line here
>>
>>> +#define CM2_LUT_TBL_BASE	0x0600
>>> +#define CM2_LUT_TBL(__i)	(CM2_LUT_TBL_BASE + (__i) * 4)
>>> +
>>> +struct rcar_cmm {
>>> +	void __iomem *base;
>>> +	bool enabled;
>>> +
>>> +	/*
>>> +	 * @lut:		1D-LUT status
>>> +	 * @lut.enabled:	1D-LUT enabled flag
>>> +	 * @lut.table:		Table of 1D-LUT entries scaled to hardware
>>> +	 *			precision (8-bits per color component)
>>> +	 */
>>> +	struct {
>>> +		bool enabled;
>>> +		u32 table[CM2_LUT_SIZE];
>>> +	} lut;
>>> +};
>>> +
>>> +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg)
>>> +{
>>> +	return ioread32(rcmm->base + reg);
>>> +}
>>> +
>>> +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32
>> data)
>>> +{
>>> +	iowrite32(data, rcmm->base + reg);
>>> +}
>>> +
>>> +/*
>>> + * rcar_cmm_lut_extract() - Scale down to hardware precision the DRM
>> LUT table
>>> + *			    entries and store them.
>>> + * @rcmm: Pointer to the CMM device
>>> + * @drm_lut: Pointer to the DRM LUT table
>>> + */
>>> +static void rcar_cmm_lut_extract(struct rcar_cmm *rcmm,
>>> +				 const struct drm_color_lut *drm_lut)
>>> +{
>>> +	unsigned int i;
>>
>> I think you're missing the following here:
>>
>> 	if (!drm_lut)
>> 		return;
>>
>> You mention below that drm_lut could be passed in as NULL, which would
>> cause a segfault here otherwise.
>>
> 
> Thanks for spotting, but I should have removed that comment, as I have
> killed that case in rcar_du_atomic_commit_update_cmm() in patch 8/9,
> as from my testing it seems it is not possible to provide from
> userspace a non populated LUT table to just re-enable the CMM.
> 
> So we're fine here.

Great, in that case then with the comment removed, and the other
trivials in this handled however you see fit,

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>



> 
>>
>>> +
>>> +	for (i = 0; i < CM2_LUT_SIZE; ++i) {
>>> +		const struct drm_color_lut *lut = &drm_lut[i];
>>> +
>>> +		rcmm->lut.table[i] = drm_color_lut_extract(lut->red, 8) << 16
>>> +				   | drm_color_lut_extract(lut->green, 8) << 8
>>> +				   | drm_color_lut_extract(lut->blue, 8);
>>> +	}
>>> +}
>>> +
>>> +/*
>>> + * rcar_cmm_lut_write() - Write to hardware the LUT table entries
>> from the
>>> + *			  local table.
>>> + * @rcmm: Pointer to the CMM device
>>> + */
>>> +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm)
>>> +{
>>> +	unsigned int i;
>>> +
>>> +	for (i = 0; i < CM2_LUT_SIZE; ++i)
>>> +		rcar_cmm_write(rcmm, CM2_LUT_TBL(i), rcmm->lut.table[i]);
>>> +}
>>> +
>>> +/*
>>> + * rcar_cmm_setup() - Configure the CMM unit.
>>> + * @pdev: The platform device associated with the CMM instance
>>> + * @config: The CRTC-provided configuration.
>>
>> I don't think CRTC-provided should be hyphenated like that.
>> Perhaps just:
>> 	"The colour management configuration".
>>
>> As I don't think who provides the configuration is relevant to the
>> actual call.
>>
> 
> I have no idea. I've been bought into this by the comment
> 
> "CRTC-provided" is a compound adjective, qualifying the noun
> "configuration". It thus needs a hyphen.
> 
> I'm happy to remove it for a simpler version.

CRTC-provided just looks weird to me :-D however you wish to leave it is
up to you though :D


> +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -2320,6 +2320,33 @@
 			resets = <&cpg 611>;
 		};

+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		cmm3: cmm@fea70000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea70000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 708>;
+			resets = <&cpg 708>;
+		};
+
 		csi20: csi2@fea80000 {
 			compatible = "renesas,r8a77965-csi2";
 			reg = <0 0xfea80000 0 0x10000>;
@@ -2470,6 +2497,7 @@
 			status = "disabled";

 			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+			renesas,cmms = <&cmm0 &cmm1 &cmm3>;
> Thanks
>    j
> 
>>> + * Configure the CMM unit with the CRTC-provided configuration.
>>
>> s/CRTC-provided/given/
>>
>>> + * Currently enabling, disabling and programming of the 1-D LUT unit is
>>> + * supported.
>>> + */
>>> +int rcar_cmm_setup(struct platform_device *pdev,
>>> +		   const struct rcar_cmm_config *config)
>>> +{
>>> +	struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
>>> +
>>> +	/*
>>> +	 * As rcar_cmm_setup() is called by atomic commit tail helper, it might
>>> +	 * be called when the CMM is disabled. As we can't program the hardware
>>> +	 * in that case, store the configuration internally and apply it when
>>> +	 * the CMM will be enabled by the CRTC through rcar_cmm_enable().
>>> +	 */
>>> +	if (!rcmm->enabled) {
>>> +		if (!config->lut.enable)
>>> +			return 0;
>>> +
>>> +		rcar_cmm_lut_extract(rcmm, config->lut.table);
>>> +		rcmm->lut.enabled = true;
>>> +
>>> +		return 0;
>>> +	}
>>> +
>>> +	/* Stop LUT operations if requested. */
>>> +	if (!config->lut.enable) {
>>> +		if (rcmm->lut.enabled) {
>>> +			rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
>>> +			rcmm->lut.enabled = false;
>>> +		}
>>> +
>>> +		return 0;
>>> +	}
>>> +
>>> +	/*
>>> +	 * Enable LUT and program the new gamma table values.
>>> +	 *
>>> +	 * FIXME: In order to have stable operations it is required to first
>>> +	 * enable the 1D-LUT and then program its table entries. This seems to
>>> +	 * contradict what the chip manual reports, and will have to be
>>> +	 * reconsidered when implementing support for double buffering.
>>> +	 */
>>> +	if (!rcmm->lut.enabled) {
>>> +		rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN);
>>> +		rcmm->lut.enabled = true;
>>> +	}
>>> +
>>> +	rcar_cmm_lut_extract(rcmm, config->lut.table);
>>> +	rcar_cmm_lut_write(rcmm);
>>> +
>>> +	return 0;
>>> +}
>>> +EXPORT_SYMBOL_GPL(rcar_cmm_setup);
>>> +
>>> +/*
>>> + * rcar_cmm_enable() - Enable the CMM unit.
>>> + * @pdev: The platform device associated with the CMM instance
>>> + *
>>> + * Enable the CMM unit by enabling the parent clock and enabling the CMM
>>> + * components, such as 1-D LUT, if requested.
>>> + */
>>> +int rcar_cmm_enable(struct platform_device *pdev)
>>> +{
>>> +	struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
>>> +	int ret;
>>> +
>>> +	ret = pm_runtime_get_sync(&pdev->dev);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	/* Apply the LUT table values saved at rcar_cmm_setup() time. */
>>> +	if (rcmm->lut.enabled) {
>>> +		rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN);
>>> +		rcar_cmm_lut_write(rcmm);
>>> +	}
>>> +
>>> +	rcmm->enabled = true;
>>> +
>>> +	return 0;
>>> +}
>>> +EXPORT_SYMBOL_GPL(rcar_cmm_enable);
>>> +
>>> +/*
>>> + * rcar_cmm_disable() - Disable the CMM unit.
>>> + * @pdev: The platform device associated with the CMM instance
>>> + *
>>> + * Disable the CMM unit by stopping the parent clock.
>>> + */
>>> +void rcar_cmm_disable(struct platform_device *pdev)
>>> +{
>>> +	struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
>>> +
>>> +	rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
>>> +
>>> +	pm_runtime_put(&pdev->dev);
>>> +
>>> +	rcmm->lut.enabled = false;
>>> +	rcmm->enabled = false;
>>> +}
>>> +EXPORT_SYMBOL_GPL(rcar_cmm_disable);
>>> +
>>> +/*
>>> + * rcar_cmm_init() - Make sure the CMM has probed.
>>> + * @pdev: The platform device associated with the CMM instance
>>> + *
>>> + * Return: 0 if the CMM has probed, -EPROBE_DEFER otherwise
>>> + */
>>> +int rcar_cmm_init(struct platform_device *pdev)
>>> +{
>>> +	struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
>>> +
>>> +	if (!rcmm)
>>> +		return -EPROBE_DEFER;
>>> +
>>> +	return 0;
>>> +}
>>> +EXPORT_SYMBOL_GPL(rcar_cmm_init);
>>> +
>>> +static int rcar_cmm_probe(struct platform_device *pdev)
>>> +{
>>> +	struct rcar_cmm *rcmm;
>>> +
>>> +	rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL);
>>> +	if (!rcmm)
>>> +		return -ENOMEM;
>>> +	platform_set_drvdata(pdev, rcmm);
>>> +
>>> +	rcmm->base = devm_platform_ioremap_resource(pdev, 0);
>>> +	if (IS_ERR(rcmm->base))
>>> +		return PTR_ERR(rcmm->base);
>>> +
>>> +	pm_runtime_enable(&pdev->dev);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int rcar_cmm_remove(struct platform_device *pdev)
>>> +{
>>> +	pm_runtime_disable(&pdev->dev);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static const struct of_device_id rcar_cmm_of_table[] = {
>>> +	{ .compatible = "renesas,rcar-gen3-cmm", },
>>> +	{ .compatible = "renesas,rcar-gen2-cmm", },
>>> +	{ },
>>> +};
>>> +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table);
>>> +
>>> +static struct platform_driver rcar_cmm_platform_driver = {
>>> +	.probe		= rcar_cmm_probe,
>>> +	.remove		= rcar_cmm_remove,
>>> +	.driver		= {
>>> +		.name	= "rcar-cmm",
>>> +		.of_match_table = rcar_cmm_of_table,
>>> +	},
>>> +};
>>> +
>>> +module_platform_driver(rcar_cmm_platform_driver);
>>> +
>>> +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org>");
>>> +MODULE_DESCRIPTION("Renesas R-Car CMM Driver");
>>> +MODULE_LICENSE("GPL v2");
>>> diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h
>> b/drivers/gpu/drm/rcar-du/rcar_cmm.h
>>> new file mode 100644
>>> index 000000000000..15a2c874b6a6
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h
>>> @@ -0,0 +1,61 @@
>>> +/* SPDX-License-Identifier: GPL-2.0+ */
>>> +/*
>>> + * rcar_cmm.h -- R-Car Display Unit Color Management Module
>>> + *
>>> + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org>
>>> + */
>>> +
>>> +#ifndef __RCAR_CMM_H__
>>> +#define __RCAR_CMM_H__
>>> +
>>> +#define CM2_LUT_SIZE		256
>>> +
>>> +struct drm_color_lut;
>>> +struct platform_device;
>>> +
>>> +/**
>>> + * struct rcar_cmm_config - CMM configuration
>>> + *
>>> + * @lut:	1D-LUT configuration
>>> + * @lut.enable:	1D-LUT enable flag
>>> + * @lut.table:	1D-LUT table entries. Might be set to NULL when the
>> CMM has to
>>> + *		be re-enabled but not re=programmed.
>>
>> So lut.table can be NULL ... See comment at rcar_cmm_lut_extract()

Ok - so this comment will be removed.



>>
>>> + */
>>> +struct rcar_cmm_config {
>>> +	struct {
>>> +		bool enable;
>>> +		struct drm_color_lut *table;
>>> +	} lut;
>>> +};
>>> +
>>> +#if IS_ENABLED(CONFIG_DRM_RCAR_CMM)
>>> +int rcar_cmm_init(struct platform_device *pdev);
>>> +
>>> +int rcar_cmm_enable(struct platform_device *pdev);
>>> +void rcar_cmm_disable(struct platform_device *pdev);
>>> +
>>> +int rcar_cmm_setup(struct platform_device *pdev,
>>> +		   const struct rcar_cmm_config *config);
>>> +#else
>>> +static inline int rcar_cmm_init(struct platform_device *pdev)
>>> +{
>>> +	return 0;
>>> +}
>>> +
>>> +static inline int rcar_cmm_enable(struct platform_device *pdev)
>>> +{
>>> +	return 0;
>>> +}
>>> +
>>> +static inline void rcar_cmm_disable(struct platform_device *pdev)
>>> +{
>>> +}
>>> +
>>> +static int rcar_cmm_setup(struct platform_device *pdev,
>>> +			  const struct rcar_cmm_config *config)
>>> +{
>>> +	return 0;
>>> +}
>>> +#endif /* IS_ENABLED(CONFIG_DRM_RCAR_CMM) */
>>> +
>>> +#endif /* __RCAR_CMM_H__ */
>>>
>>