From: Kieran Bingham <kieran.bingham@ideasonboard.com>
To: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
dri-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org,
Jacopo Mondi <jacopo+renesas@jmondi.org>
Subject: Re: [PATCH v3 07/10] drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode
Date: Sat, 8 Jun 2019 00:19:46 +0100 [thread overview]
Message-ID: <87c638f9-d321-397f-9e41-2c02036351b6@ideasonboard.com> (raw)
In-Reply-To: <20190528141234.15425-8-laurent.pinchart+renesas@ideasonboard.com>
Hi Laurent,
On 28/05/2019 15:12, Laurent Pinchart wrote:
> In dual-link LVDS mode, the LVDS1 encoder is used as a companion for
> LVDS0, and both encoders transmit data from DU0. The LVDS1 output of DU1
> can't be used in that case, don't create an encoder and connector for
> it.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
And finally, Last one...
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> ---
> Changess since v2:
>
> - Remove unneeded bridge NULL check
> ---
> drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 12 ++++++++++++
> drivers/gpu/drm/rcar-du/rcar_du_kms.c | 2 +-
> 2 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> index 6c91753af7bc..0f00bdfe2366 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> @@ -16,6 +16,7 @@
> #include "rcar_du_drv.h"
> #include "rcar_du_encoder.h"
> #include "rcar_du_kms.h"
> +#include "rcar_lvds.h"
>
> /* -----------------------------------------------------------------------------
> * Encoder
> @@ -97,6 +98,17 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
> }
> }
>
> + /*
> + * On Gen3 skip the LVDS1 output if the LVDS1 encoder is used as a
> + * companion for LVDS0 in dual-link mode.
> + */
> + if (rcdu->info->gen >= 3 && output == RCAR_DU_OUTPUT_LVDS1) {
> + if (rcar_lvds_dual_link(bridge)) {
> + ret = -ENOLINK;
> + goto done;
> + }
> + }
> +
> ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
> DRM_MODE_ENCODER_NONE, NULL);
> if (ret < 0)
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> index f8f7fff34dff..95c81e59e2f1 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> @@ -378,7 +378,7 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
> }
>
> ret = rcar_du_encoder_init(rcdu, output, entity);
> - if (ret && ret != -EPROBE_DEFER)
> + if (ret && ret != -EPROBE_DEFER && ret != -ENOLINK)
> dev_warn(rcdu->dev,
> "failed to initialize encoder %pOF on output %u (%d), skipping\n",
> entity, output, ret);
>
--
Regards
--
Kieran
next prev parent reply other threads:[~2019-06-07 23:19 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 14:12 [PATCH v3 00/10] R-Car DU: LVDS dual-link mode support Laurent Pinchart
2019-05-28 14:12 ` [PATCH v3 01/10] drm: bridge: Add dual_link field to the drm_bridge_timings structure Laurent Pinchart
2019-07-30 12:12 ` Neil Armstrong
2019-05-28 14:12 ` [PATCH v3 02/10] dt-bindings: display: bridge: thc63lvd1024: Document dual-link operation Laurent Pinchart
2019-06-07 22:15 ` Kieran Bingham
2019-06-07 22:30 ` Laurent Pinchart
2019-06-07 22:36 ` Kieran Bingham
2019-05-28 14:12 ` [PATCH v3 03/10] drm: bridge: thc63: Report input bus mode through bridge timings Laurent Pinchart
2019-06-07 22:51 ` Kieran Bingham
2019-07-30 12:13 ` Neil Armstrong
2019-05-28 14:12 ` [PATCH v3 04/10] dt-bindings: display: renesas: lvds: Add renesas,companion property Laurent Pinchart
2019-05-28 16:37 ` [PATCH v3 04/10] dt-bindings: display: renesas: lvds: Add renesas, companion property Sam Ravnborg
2019-05-28 16:49 ` Laurent Pinchart
2019-05-28 16:59 ` Sam Ravnborg
2019-06-06 7:54 ` Laurent Pinchart
2019-06-06 9:27 ` Sam Ravnborg
2019-06-07 22:33 ` [PATCH v3 04/10] dt-bindings: display: renesas: lvds: Add renesas,companion property Kieran Bingham
2019-05-28 14:12 ` [PATCH v3 05/10] drm: rcar-du: lvds: Remove LVDS double-enable checks Laurent Pinchart
2019-06-07 22:09 ` Kieran Bingham
2019-05-28 14:12 ` [PATCH v3 06/10] drm: rcar-du: lvds: Add support for dual-link mode Laurent Pinchart
2019-06-07 23:11 ` Kieran Bingham
2019-05-28 14:12 ` [PATCH v3 07/10] drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode Laurent Pinchart
2019-05-28 16:42 ` Sam Ravnborg
2019-05-28 16:50 ` Laurent Pinchart
2019-05-28 17:02 ` Sam Ravnborg
2019-06-06 7:57 ` Laurent Pinchart
2019-06-06 9:29 ` Sam Ravnborg
2019-06-07 23:19 ` Kieran Bingham [this message]
2019-05-28 14:12 ` [PATCH v3 08/10] arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1 Laurent Pinchart
2019-06-03 11:40 ` Simon Horman
2019-06-06 7:59 ` Laurent Pinchart
2019-06-06 8:51 ` Simon Horman
2019-06-12 10:21 ` Laurent Pinchart
2019-06-12 11:52 ` Simon Horman
2019-06-07 23:15 ` Kieran Bingham
2019-05-28 14:12 ` [PATCH v3 09/10] [HACK] arm64: dts: renesas: draak: Enable LVDS dual-link operation Laurent Pinchart
2019-05-28 14:12 ` [PATCH v3 10/10] [HACK] arm64: dts: renesas: ebisu: " Laurent Pinchart
2019-07-22 11:27 ` Fabrizio Castro
2019-07-23 10:30 ` Jacopo Mondi
2019-07-23 12:16 ` Fabrizio Castro
2019-05-28 16:46 ` [PATCH v3 00/10] R-Car DU: LVDS dual-link mode support Sam Ravnborg
2019-06-07 22:16 ` Kieran Bingham
2019-06-07 22:21 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87c638f9-d321-397f-9e41-2c02036351b6@ideasonboard.com \
--to=kieran.bingham@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jacopo+renesas@jmondi.org \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).