From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org,
kazuya.mizuguchi.ks@renesas.com,
yoshihiro.shimoda.uh@renesas.com, hoai.luu.ub@renesas.com,
takeshi.kihara.df@renesas.com, harunobu.kurokawa.dn@renesas.com,
khiem.nguyen.xt@renesas.com, hien.dang.eb@renesas.com
Subject: [PATCH 3/3] arm64: dts: renesas: r8a77995: draak: Add R-Car Sound support
Date: 17 May 2021 09:37:02 +0900 [thread overview]
Message-ID: <87fsymci1d.wl-kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <87k0nyci2t.wl-kuninori.morimoto.gx@renesas.com>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
This patch adds R-Car Sound support for D3 draak.
One note is that it is using different clock definition style
from ulcb/salvator boards to avoid verbose clocks settings
on rcar_sound node (see ulcb.dtsi rcar_sound::clocks).
cs2000 and ADG are closs connected, and needs each other.
ulcb/salvator boards assume drivers are probed cs2000 -> rcar_sound.
This draak board assumes drivers are probed rcar_sound -> cs2000.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
.../arm64/boot/dts/renesas/r8a77995-draak.dts | 103 ++++++++++++++++++
1 file changed, 103 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 6783c3ad0856..591fad289802 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -6,6 +6,11 @@
* Copyright (C) 2017 Glider bvba
*/
+/*
+ * This assumes...
+ * SW60 : 2-1
+ */
+
/dts-v1/;
#include "r8a77995.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -156,11 +161,25 @@ adv7123_out: endpoint {
};
};
+ sound_card: sound {
+ compatible = "audio-graph-card";
+
+ dais = <&rsnd_port0 /* ak4613 */
+ /* HDMI is not yet supported */
+ >;
+ };
+
x12_clk: x12 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
+
+ x19_clk: x19 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
};
&avb {
@@ -347,6 +366,39 @@ eeprom@50 {
reg = <0x50>;
pagesize = <8>;
};
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 0>; /* audio_clkout */
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+
+ port {
+ ak4613_endpoint: endpoint {
+ remote-endpoint = <&rsnd_for_ak4613>;
+ };
+ };
+ };
+
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&rcar_sound 1>, <&x19_clk>; /* audio_clkout_1, x19 */
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
};
&i2c1 {
@@ -391,6 +443,46 @@ &ohci0 {
status = "okay";
};
+&audio_clk_a {
+ /* same as cs2000 */
+ clock-frequency = <24576000>;
+};
+
+&audio_clk_b {
+ clock-frequency = <22579200>;
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1 */
+ #clock-cells = <1>;
+ clock-frequency = <12288000 11289600>;
+
+ status = "okay";
+
+ ports {
+ rsnd_port0: port {
+ rsnd_for_ak4613: endpoint {
+ remote-endpoint = <&ak4613_endpoint>;
+ dai-format = "left_j";
+ bitclock-master = <&rsnd_for_ak4613>;
+ frame-master = <&rsnd_for_ak4613>;
+ playback = <&ssi3>, <&src5>, <&dvc0>;
+ capture = <&ssi4>, <&src6>, <&dvc1>;
+ };
+ };
+ };
+};
+
+&ssi4 {
+ shared-pin;
+};
+
&pfc {
avb0_pins: avb {
groups = "avb0_link", "avb0_mdio", "avb0_mii";
@@ -449,6 +541,17 @@ sdhi2_pins_uhs: sd2_uhs {
power-source = <1800>;
};
+ sound_pins: sound {
+ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound-clk {
+ groups = "audio_clk_a", "audio_clk_b",
+ "audio_clkout", "audio_clkout1";
+ function = "audio_clk";
+ };
+
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
--
2.25.1
next prev parent reply other threads:[~2021-05-17 0:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-17 0:36 [PATCH 0/3] arm64: dts: renesas: r8a77995: draak: add R-Car Sound support Kuninori Morimoto
2021-05-17 0:36 ` [PATCH 1/3] clk: renesas: r8a77995: Add ZA2 clock Kuninori Morimoto
2021-05-17 9:36 ` Geert Uytterhoeven
2021-05-17 22:20 ` Kuninori Morimoto
2021-05-24 0:57 ` Kuninori Morimoto
2021-05-25 7:42 ` Geert Uytterhoeven
2021-05-17 0:36 ` [PATCH 2/3] arm64: dts: renesas: r8a77995: add R-Car Sound support Kuninori Morimoto
2021-05-17 11:33 ` Geert Uytterhoeven
2021-05-17 22:27 ` Kuninori Morimoto
2021-05-24 5:43 ` Kuninori Morimoto
2021-05-25 7:40 ` Geert Uytterhoeven
2021-05-25 22:53 ` Kuninori Morimoto
2021-05-17 0:37 ` Kuninori Morimoto [this message]
2021-05-17 11:46 ` [PATCH 3/3] arm64: dts: renesas: r8a77995: draak: Add " Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87fsymci1d.wl-kuninori.morimoto.gx@renesas.com \
--to=kuninori.morimoto.gx@renesas.com \
--cc=geert+renesas@glider.be \
--cc=harunobu.kurokawa.dn@renesas.com \
--cc=hien.dang.eb@renesas.com \
--cc=hoai.luu.ub@renesas.com \
--cc=kazuya.mizuguchi.ks@renesas.com \
--cc=khiem.nguyen.xt@renesas.com \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=takeshi.kihara.df@renesas.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).