linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	Marek Vasut <marek.vasut+renesas@gmail.com>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	linux-pci <linux-pci@vger.kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Andrew Murray <andrew.murray@arm.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>,
	LAK <linux-arm-kernel@lists.infradead.org>,
	Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Frank Rowand <frowand.list@gmail.com>,
	Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Simon Horman <horms@verge.net.au>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	Tom Joseph <tjoseph@cadence.com>,
	Heiko Stuebner <heiko@sntech.de>,
	"open list:ARM/Rockchip SoC..."
	<linux-rockchip@lists.infradead.org>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [v3 3/6] PCI: endpoint: Add support to handle multiple base for mapping outbound memory
Date: Fri, 10 Jan 2020 18:08:21 +0000	[thread overview]
Message-ID: <CA+V-a8tHkqkxE_5DMtt6PbJyGz1vfKZUezE5nOFmJXarJAugkw@mail.gmail.com> (raw)
In-Reply-To: <53d74632-34ee-f7f7-656f-a93a6c10e7ba@ti.com>

Hi Kishon,

Thank you for the review.

On Thu, Jan 9, 2020 at 6:25 AM Kishon Vijay Abraham I <kishon@ti.com> wrote:
>
> Hi Prabhakar,
>
> On 08/01/20 9:52 PM, Lad Prabhakar wrote:
> > R-Car PCIe controller has support to map multiple memory regions for
> > mapping the outbound memory in local system also the controller limits
> > single allocation for each region (that is, once a chunk is used from the
> > region it cannot be used to allocate a new one). This features inspires to
> > add support for handling multiple memory bases in endpoint framework.
> >
> > With this patch pci_epc_mem_init() now accepts multiple regions, also
> > page_size for each memory region is passed during initialization so as
> > to handle single allocation for each region by setting the page_size to
> > window_size.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> >  .../pci/controller/cadence/pcie-cadence-ep.c  |  12 +-
> >  .../pci/controller/dwc/pcie-designware-ep.c   |  31 ++-
> >  drivers/pci/controller/pcie-rockchip-ep.c     |  14 +-
> >  drivers/pci/endpoint/functions/pci-epf-test.c |  29 +--
> >  drivers/pci/endpoint/pci-epc-core.c           |   7 +-
> >  drivers/pci/endpoint/pci-epc-mem.c            | 199 ++++++++++++++----
> >  include/linux/pci-epc.h                       |  46 ++--
> >  7 files changed, 245 insertions(+), 93 deletions(-)
> >
> .
> .
> <snip>
> .
> .
> > diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
> > index 2091508c1620..289c266c2d90 100644
> > --- a/drivers/pci/endpoint/pci-epc-core.c
> > +++ b/drivers/pci/endpoint/pci-epc-core.c
> > @@ -358,13 +358,15 @@ EXPORT_SYMBOL_GPL(pci_epc_unmap_addr);
> >   * @epc: the EPC device on which address is allocated
> >   * @func_no: the endpoint function number in the EPC device
> >   * @phys_addr: physical address of the local system
> > + * @window: index to the window region where PCI address will be mapped
> >   * @pci_addr: PCI address to which the physical address should be mapped
> >   * @size: the size of the allocation
> >   *
> >   * Invoke to map CPU address with PCI address.
> >   */
> >  int pci_epc_map_addr(struct pci_epc *epc, u8 func_no,
> > -                  phys_addr_t phys_addr, u64 pci_addr, size_t size)
> > +                  phys_addr_t phys_addr, int window,
> > +                  u64 pci_addr, size_t size)
> >  {
> >       int ret;
> >       unsigned long flags;
> > @@ -376,7 +378,8 @@ int pci_epc_map_addr(struct pci_epc *epc, u8 func_no,
> >               return 0;
> >
> >       spin_lock_irqsave(&epc->lock, flags);
> > -     ret = epc->ops->map_addr(epc, func_no, phys_addr, pci_addr, size);
> > +     ret = epc->ops->map_addr(epc, func_no, phys_addr,
> > +                              window, pci_addr, size);
> >       spin_unlock_irqrestore(&epc->lock, flags);
> >
> >       return ret;
> > diff --git a/drivers/pci/endpoint/pci-epc-mem.c b/drivers/pci/endpoint/pci-epc-mem.c
> > index d2b174ce15de..f205f7819292 100644
> > --- a/drivers/pci/endpoint/pci-epc-mem.c
> > +++ b/drivers/pci/endpoint/pci-epc-mem.c
> > @@ -38,57 +38,77 @@ static int pci_epc_mem_get_order(struct pci_epc_mem *mem, size_t size)
> >  /**
> >   * __pci_epc_mem_init() - initialize the pci_epc_mem structure
> >   * @epc: the EPC device that invoked pci_epc_mem_init
> > - * @phys_base: the physical address of the base
> > - * @size: the size of the address space
> > - * @page_size: size of each page
> > + * @windows: pointer to windows supported by the device
> > + * @num_windows: number of windows device supports
> >   *
> >   * Invoke to initialize the pci_epc_mem structure used by the
> >   * endpoint functions to allocate mapped PCI address.
> >   */
> > -int __pci_epc_mem_init(struct pci_epc *epc, phys_addr_t phys_base, size_t size,
> > -                    size_t page_size)
> > +int __pci_epc_mem_init(struct pci_epc *epc, struct pci_epc_mem_window *windows,
> > +                    int num_windows)
> >  {
> > -     int ret;
> > -     struct pci_epc_mem *mem;
> > -     unsigned long *bitmap;
> > +     struct pci_epc_mem *mem = NULL;
> > +     unsigned long *bitmap = NULL;
> >       unsigned int page_shift;
> > -     int pages;
> > +     size_t page_size;
> >       int bitmap_size;
> > +     int pages;
> > +     int ret;
> > +     int i;
> >
> > -     if (page_size < PAGE_SIZE)
> > -             page_size = PAGE_SIZE;
> > +     epc->mem_windows = 0;
> >
> > -     page_shift = ilog2(page_size);
> > -     pages = size >> page_shift;
> > -     bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
> > +     if (!windows)
> > +             return -EINVAL;
> >
> > -     mem = kzalloc(sizeof(*mem), GFP_KERNEL);
> > -     if (!mem) {
> > -             ret = -ENOMEM;
> > -             goto err;
> > -     }
> > +     if (num_windows <= 0)
> > +             return -EINVAL;
> >
> > -     bitmap = kzalloc(bitmap_size, GFP_KERNEL);
> > -     if (!bitmap) {
> > -             ret = -ENOMEM;
> > -             goto err_mem;
> > -     }
> > +     epc->mem = kcalloc(num_windows, sizeof(*mem), GFP_KERNEL);
> > +     if (!epc->mem)
> > +             return -EINVAL;
> > +
> > +     for (i = 0; i < num_windows; i++) {
> > +             page_size = windows[i].page_size;
> > +             if (page_size < PAGE_SIZE)
> > +                     page_size = PAGE_SIZE;
> > +             page_shift = ilog2(page_size);
> > +             pages = windows[i].size >> page_shift;
> > +             bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
> > +
> > +             mem = kzalloc(sizeof(*mem), GFP_KERNEL);
> > +             if (!mem) {
> > +                     ret = -ENOMEM;
> > +                     goto err_mem;
> > +             }
> >
> > -     mem->bitmap = bitmap;
> > -     mem->phys_base = phys_base;
> > -     mem->page_size = page_size;
> > -     mem->pages = pages;
> > -     mem->size = size;
> > +             bitmap = kzalloc(bitmap_size, GFP_KERNEL);
> > +             if (!bitmap) {
> > +                     ret = -ENOMEM;
> > +                     goto err_mem;
> > +             }
> >
> > -     epc->mem = mem;
> > +             mem->bitmap = bitmap;
> > +             mem->window.phys_base = windows[i].phys_base;
> > +             mem->page_size = page_size;
> > +             mem->pages = pages;
> > +             mem->window.size = windows[i].size;
> > +             mem->window.map_size = 0;
> > +
> > +             epc->mem[i] = mem;
> > +     }
> > +     epc->mem_windows = num_windows;
> >
> >       return 0;
> >
> >  err_mem:
> > -     kfree(mem);
> > +     for (; i >= 0; i--) {
>
> mem has to be reinitialized for every iteration of the loop.
not sure what exactly you mean here, could you please elaborate.

> > +             kfree(mem->bitmap);
> > +             kfree(epc->mem[i]);
> > +     }
> > +     kfree(epc->mem);
> >
> > -err:
> > -return ret;
> > +     return ret;
> >  }
> >  EXPORT_SYMBOL_GPL(__pci_epc_mem_init);
> >
> > @@ -101,48 +121,127 @@ EXPORT_SYMBOL_GPL(__pci_epc_mem_init);
> >   */
> >  void pci_epc_mem_exit(struct pci_epc *epc)
> >  {
> > -     struct pci_epc_mem *mem = epc->mem;
> > +     struct pci_epc_mem *mem;
> > +     int i;
> > +
> > +     if (!epc->mem_windows)
> > +             return;
> > +
> > +     for (i = 0; i <= epc->mem_windows; i++) {
> > +             mem = epc->mem[i];
> > +             kfree(mem->bitmap);
> > +             kfree(epc->mem[i]);
> > +     }
> > +     kfree(epc->mem);
> >
> >       epc->mem = NULL;
> > -     kfree(mem->bitmap);
> > -     kfree(mem);
> > +     epc->mem_windows = 0;
> >  }
> >  EXPORT_SYMBOL_GPL(pci_epc_mem_exit);
> >
> > +static int pci_epc_find_best_fit_window(struct pci_epc *epc, size_t size)
> > +{
> > +     size_t window_least_size = 0;
> > +     int best_fit_window = -1;
> > +     struct pci_epc_mem *mem;
> > +     size_t actual_size;
> > +     size_t avail_size;
> > +     int i;
> > +
> > +     for (i = 0; i < epc->mem_windows; i++) {
> > +             mem = epc->mem[i];
> > +
> > +             actual_size = ALIGN(size, mem->page_size);
> > +             avail_size = mem->window.size - mem->window.map_size;
> > +
> > +             if (best_fit_window == -1) {
> > +                     if (actual_size <= avail_size) {
> > +                             best_fit_window = i;
> > +                             window_least_size = mem->window.size;
> > +                     }
> > +             } else {
> > +                     if (actual_size <= avail_size &&
> > +                         mem->window.size < window_least_size) {
> > +                             best_fit_window = i;
> > +                             window_least_size = mem->window.size;
> > +                     }
> > +             }
> > +     }
> > +
> > +     return best_fit_window;
> > +}
>
> This function shouldn't be required at all. Just loop over all the
> windows invoking bitmap_find_free_region(), breaking the loop if it
> succeeds and continuing if there is no free region.
sure will do.
> > +
> >  /**
> >   * pci_epc_mem_alloc_addr() - allocate memory address from EPC addr space
> >   * @epc: the EPC device on which memory has to be allocated
> >   * @phys_addr: populate the allocated physical address here
> > + * @window: populate the window here which will be used to map PCI address
> >   * @size: the size of the address space that has to be allocated
> >   *
> >   * Invoke to allocate memory address from the EPC address space. This
> >   * is usually done to map the remote RC address into the local system.
> >   */
> >  void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
> > -                                  phys_addr_t *phys_addr, size_t size)
> > +                                  phys_addr_t *phys_addr,
> > +                                  int *window, size_t size)
> >  {
> > +     int best_fit = PCI_EPC_DEFAULT_WINDOW;
> > +     void __iomem *virt_addr = NULL;
> > +     struct pci_epc_mem *mem;
> > +     unsigned int page_shift;
> >       int pageno;
> > -     void __iomem *virt_addr;
> > -     struct pci_epc_mem *mem = epc->mem;
> > -     unsigned int page_shift = ilog2(mem->page_size);
> >       int order;
> >
> > +     if (epc->mem_windows <= 0)
> > +             return NULL;
> > +
> > +     if (epc->mem_windows > 1) {
> > +             best_fit = pci_epc_find_best_fit_window(epc, size);
> > +             if (best_fit < 0)
> > +                     return NULL;
> > +     }
> > +
> > +     mem = epc->mem[best_fit];
> >       size = ALIGN(size, mem->page_size);
> > +     if (size > (mem->window.size - mem->window.map_size))
> > +             return NULL;
> > +     page_shift = ilog2(mem->page_size);
> >       order = pci_epc_mem_get_order(mem, size);
> >
> >       pageno = bitmap_find_free_region(mem->bitmap, mem->pages, order);
> >       if (pageno < 0)
> >               return NULL;
>
> This has to be invoked now in a loop for the number of windows. If
> pageno < 0, continue the loop or else break.
> >
will fix that.

> > -     *phys_addr = mem->phys_base + ((phys_addr_t)pageno << page_shift);
> > +     *phys_addr = mem->window.phys_base +
> > +                  ((phys_addr_t)pageno << page_shift);
> >       virt_addr = ioremap(*phys_addr, size);
> > -     if (!virt_addr)
> > +     if (!virt_addr) {
> >               bitmap_release_region(mem->bitmap, pageno, order);
> > +     } else {
> > +             mem->window.map_size += size;
>
> The map_size shouldn't be required.
> > +             *window = best_fit;
>
> Can't the platform driver get the window based on the address? Let's try
> to avoid modifying API's for platform specific requirements.
should be possible, will do that.

> > +     }
> >
> >       return virt_addr;
> >  }
> >  EXPORT_SYMBOL_GPL(pci_epc_mem_alloc_addr);
> >
> > +static int pci_epc_get_matching_window(struct pci_epc *epc,
> > +                                    phys_addr_t phys_addr)
> > +{
> > +     struct pci_epc_mem *mem;
> > +     int i;
> > +
> > +     for (i = 0; i < epc->mem_windows; i++) {
> > +             mem = epc->mem[i];
> > +
> > +             if (mem->window.phys_base == phys_addr)
> > +                     return i;
> > +     }
> > +
> > +     return -EINVAL;
> > +}
> > +
> >  /**
> >   * pci_epc_mem_free_addr() - free the allocated memory address
> >   * @epc: the EPC device on which memory was allocated
> > @@ -155,16 +254,26 @@ EXPORT_SYMBOL_GPL(pci_epc_mem_alloc_addr);
> >  void pci_epc_mem_free_addr(struct pci_epc *epc, phys_addr_t phys_addr,
> >                          void __iomem *virt_addr, size_t size)
> >  {
> > +     struct pci_epc_mem *mem;
> > +     unsigned int page_shift;
> > +     int window = 0;
> >       int pageno;
> > -     struct pci_epc_mem *mem = epc->mem;
> > -     unsigned int page_shift = ilog2(mem->page_size);
> >       int order;
> >
> > +     if (epc->mem_windows > 1) {
> > +             window = pci_epc_get_matching_window(epc, phys_addr);
> > +             if (window < 0)
> > +                     return;
> > +     }
> > +
> > +     mem = epc->mem[window];
> > +     page_shift = ilog2(mem->page_size);
> >       iounmap(virt_addr);
> > -     pageno = (phys_addr - mem->phys_base) >> page_shift;
> > +     pageno = (phys_addr - mem->window.phys_base) >> page_shift;
> >       size = ALIGN(size, mem->page_size);
> >       order = pci_epc_mem_get_order(mem, size);
> >       bitmap_release_region(mem->bitmap, pageno, order);
> > +     mem->window.map_size -= size;
> >  }
> >  EXPORT_SYMBOL_GPL(pci_epc_mem_free_addr);
> >
> > diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
> > index 56f1846b9d39..89daafa0d19f 100644
> > --- a/include/linux/pci-epc.h
> > +++ b/include/linux/pci-epc.h
> > @@ -48,7 +48,8 @@ struct pci_epc_ops {
> >       void    (*clear_bar)(struct pci_epc *epc, u8 func_no,
> >                            struct pci_epf_bar *epf_bar);
> >       int     (*map_addr)(struct pci_epc *epc, u8 func_no,
> > -                         phys_addr_t addr, u64 pci_addr, size_t size);
> > +                         phys_addr_t addr, int window,
> > +                         u64 pci_addr, size_t size);
> >       void    (*unmap_addr)(struct pci_epc *epc, u8 func_no,
> >                             phys_addr_t addr);
> >       int     (*set_msi)(struct pci_epc *epc, u8 func_no, u8 interrupts);
> > @@ -64,17 +65,31 @@ struct pci_epc_ops {
> >       struct module *owner;
> >  };
> >
> > +#define PCI_EPC_DEFAULT_WINDOW         0
> > +
> > +/**
> > + * struct pci_epc_mem_window - address window of the endpoint controller
> > + * @phys_base: physical base address of the PCI address window
> > + * @size: the size of the PCI address window
> > + * @map_size: size of allocated chunk in window
> > + * @page_size: size of each page
> > + */
> > +struct pci_epc_mem_window {
> > +     phys_addr_t     phys_base;
> > +     size_t          size;
> > +     size_t          map_size;
>
> mem->bitmap already holds the map_size information. This structure can
> be used only for passing info about the mem windows from platform to the
> core. So map_size shouldn't be required.
>
agreed will drop it.

Cheers,
--Prabhakar

  reply	other threads:[~2020-01-10 18:08 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-08 16:22 [v3 0/6] Add support for PCIe controller to work in endpoint mode on R-Car SoCs Lad Prabhakar
2020-01-08 16:22 ` [v3 1/6] PCI: rcar: Preparation for adding endpoint support Lad Prabhakar
2020-01-08 16:22 ` [v3 2/6] PCI: rcar: Fix calculating mask for PCIEPAMR register Lad Prabhakar
2020-01-08 16:22 ` [v3 3/6] PCI: endpoint: Add support to handle multiple base for mapping outbound memory Lad Prabhakar
2020-01-09  6:27   ` Kishon Vijay Abraham I
2020-01-10 18:08     ` Lad, Prabhakar [this message]
2020-01-13  8:58       ` Kishon Vijay Abraham I
2020-01-14  8:09         ` Lad, Prabhakar
2020-01-08 16:22 ` [v3 4/6] dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller Lad Prabhakar
2020-01-13 21:22   ` Rob Herring
2020-01-14  8:11     ` Lad, Prabhakar
2020-01-21 17:57   ` Lad, Prabhakar
2020-01-22  8:15     ` Kishon Vijay Abraham I
2020-01-30 20:54       ` Lad, Prabhakar
2020-01-08 16:22 ` [v3 5/6] PCI: rcar: Add support for rcar PCIe controller in endpoint mode Lad Prabhakar
2020-01-16  5:55   ` Kishon Vijay Abraham I
2020-01-08 16:22 ` [v3 6/6] misc: pci_endpoint_test: Add Device ID for RZ/G2E PCIe controller Lad Prabhakar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+V-a8tHkqkxE_5DMtt6PbJyGz1vfKZUezE5nOFmJXarJAugkw@mail.gmail.com \
    --to=prabhakar.csengg@gmail.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=andrew.murray@arm.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=gregkh@linuxfoundation.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=heiko@sntech.de \
    --cc=horms@verge.net.au \
    --cc=jingoohan1@gmail.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=magnus.damm@gmail.com \
    --cc=marek.vasut+renesas@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh+dt@kernel.org \
    --cc=shawn.lin@rock-chips.com \
    --cc=tjoseph@cadence.com \
    --cc=will@kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).