linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Magnus Damm <magnus.damm@gmail.com>,
	"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH v3 2/4] pinctrl: renesas: Add RZ/G2L pin and gpio controller driver
Date: Mon, 26 Jul 2021 17:02:22 +0100	[thread overview]
Message-ID: <CA+V-a8tb+F_CfbzUYoQBka0c2WptA+GpirxWSSoGYMgR6KpTMA@mail.gmail.com> (raw)
In-Reply-To: <CAMuHMdWD+p7w2_KSsM-sYoZfK-7z4BM7yXAOf+5amxkmq4xvPg@mail.gmail.com>

Hi Geert,

Thank you for the review.

On Mon, Jul 26, 2021 at 2:25 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Wed, Jul 21, 2021 at 9:16 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > Add support for pin and gpio controller driver for RZ/G2L SoC.
> >
> > Based on a patch in the BSP by Hien Huynh <hien.huynh.px@renesas.com>.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
>
> Thanks for the update!
>
> > --- /dev/null
> > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
>
> > +#define RZG2L_MPXED_PIN_FUNCS          (PIN_CFG_IOLH | \
> > +                                        PIN_CFG_SR | \
> > +                                        PIN_CFG_PUPD | \
> > +                                        PIN_CFG_FILONOFF | \
> > +                                        PIN_CFG_FILNUM | \
> > +                                        PIN_CFG_FILCLKSEL)
> > +
> > +#define RZG2L_MPXED_ETH_PIN_FUNCS(x)   ((x) | \
> > +                                        PIN_CFG_FILONOFF | \
> > +                                        PIN_CFG_FILNUM | \
> > +                                        PIN_CFG_FILCLKSEL)
>
> I thought you were going for MULTI? ;-)
>
I renamed it to _MULTI but it didn't sound good so renamed it to the
other suggested alternative "MPXED".

> > +
> > +/*
> > + * n indicates number of pins in the port, a is the register index
> > + * and f is pin configuration capabilities supported.
> > + */
> > +#define RZG2L_GPIO_PORT_PACK(n, a, f)  (((n) << 28) | ((a) << 20) | (f))
> > +#define RZG2L_GPIO_PORT_GET_PINCNT(x)  (((x) >> 28) & 0x7)
> > +#define RZG2L_GPIO_PORT_GET_INDEX(x)   ((((x) & GENMASK(27, 20)) >> 20) & 0x7f)
>
> Actually the "& 0x7f" can be removed, too, if you adjust the mask:
>
>     (((x) & GENMASK(26, 20)) >> 20)
>
Agreed.

> > +#define RZG2L_GPIO_PORT_GET_CFGS(x)    ((x) & GENMASK(19, 0))
> > +
> > +/*
> > + * BIT(31) indicates dedicated pin, p is the register index while
> > + * referencing to SR/IEN/IOLH/FILxx registers, b is the register bits
> > + * (b * 8) and f is the pin configuration capabilities supported.
> > + */
> > +#define RZG2L_SINGLE_PIN               BIT(31)
> > +#define RZG2L_SINGLE_PIN_PACK(p, b, f) (RZG2L_SINGLE_PIN | \
> > +                                        ((p) << 24) | ((b) << 20) | (f))
> > +#define RZG2L_SINGLE_PIN_GET_PORT(x)   (((x) >> 24) & 0x7f)
> > +#define RZG2L_SINGLE_PIN_GET_BIT(x)    ((((x) & GENMASK(23, 20)) >> 20) & 0x7)
>
> Likewise:
>
>     (((x) & GENMASK(22, 20)) >> 20)
>
Agreed.

> > +#define RZG2L_SINGLE_PIN_GET_CFGS(x)   ((x) & GENMASK(19, 0))
>
> > +       struct rzg2l_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> > +       struct function_desc *func;
> > +       unsigned int i, *psel_val;
> > +       struct group_desc *group;
> > +       unsigned long data;
> > +       int *pins;
> > +
> > +       func = pinmux_generic_get_function(pctldev, func_selector);
> > +       if (!func)
> > +               return -EINVAL;
> > +       group = pinctrl_generic_get_group(pctldev, group_selector);
> > +       if (!group)
> > +               return -EINVAL;
> > +
> > +       psel_val = func->data;
> > +       pins = group->pins;
> > +       data = (unsigned long)group->data;
>
> Lkp reports data is unused.
> Which matches with passing NULL as the last parameter of
> pinctrl_generic_add_group().
>
Will drop this variable.

Cheers,
Prabhakar
> > +
> > +       for (i = 0; i < group->num_pins; i++) {
> > +               dev_dbg(pctrl->dev, "port:%u pin: %u PSEL:%u\n",
> > +                       RZG2L_PIN_ID_TO_PORT(pins[i]), RZG2L_PIN_ID_TO_PIN(pins[i]),
> > +                       psel_val[i]);
> > +               rzg2l_pinctrl_set_pfc_mode(pctrl, RZG2L_PIN_ID_TO_PORT(pins[i]),
> > +                                          RZG2L_PIN_ID_TO_PIN(pins[i]), psel_val[i]);
> > +       }
> > +
> > +       return 0;
> > +};
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds

  parent reply	other threads:[~2021-07-26 16:02 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-21 19:15 [PATCH v3 0/4] pin and gpio controller driver for Renesas RZ/G2L Lad Prabhakar
2021-07-21 19:15 ` [PATCH v3 1/4] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add DT bindings for RZ/G2L pinctrl Lad Prabhakar
2021-07-22 14:37   ` Rob Herring
2021-07-27  9:26     ` Lad, Prabhakar
2021-07-27 14:42       ` Rob Herring
2021-07-27 14:43   ` Rob Herring
2021-07-21 19:15 ` [PATCH v3 2/4] pinctrl: renesas: Add RZ/G2L pin and gpio controller driver Lad Prabhakar
2021-07-21 20:34   ` kernel test robot
2021-07-26 13:25   ` Geert Uytterhoeven
2021-07-26 13:34     ` Andy Shevchenko
2021-07-26 16:03       ` Lad, Prabhakar
2021-07-26 16:02     ` Lad, Prabhakar [this message]
2021-07-21 19:15 ` [PATCH v3 3/4] arm64: dts: renesas: r9a07g044: Add pinctrl node Lad Prabhakar
2021-07-21 19:15 ` [PATCH v3 4/4] arm64: dts: renesas: rzg2l-smarc: Add scif0 pins Lad Prabhakar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+V-a8tb+F_CfbzUYoQBka0c2WptA+GpirxWSSoGYMgR6KpTMA@mail.gmail.com \
    --to=prabhakar.csengg@gmail.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert@linux-m68k.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v3 2/4] pinctrl: renesas: Add RZ/G2L pin and gpio controller driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).