[PATCH 0/2] Add LVDS panel support to HiHope RZ/G2M

[PATCH 0/2] Add LVDS panel support to HiHope RZ/G2M

[Fabrizio Castro]

Dear All,

the HiHope RZ/G2M is advertised as supporting panel idk-1110wr from
Advantech, but the panel doesn't come with the board, it has to purchased
separatey, therefore this series adds panel support to a new DT.

Thanks,
Fab

Fabrizio Castro (2):
  dt-bindings: display: Add idk-1110wr binding
  arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display

 .../display/panel/advantech,idk-1110wr.yaml        | 69 +++++++++++++++++
 arch/arm64/boot/dts/renesas/Makefile               |  1 +
 .../r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts        | 86 ++++++++++++++++++++++
 3 files changed, 156 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
 create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts

-- 
2.7.4

[PATCH 1/2] dt-bindings: display: Add idk-1110wr binding

[Fabrizio Castro]

Add binding for the idk-1110wr LVDS panel from Advantech.

Some panel-specific documentation can be found here:
https://buy.advantech.eu/Displays/Embedded-LCD-Kits-LCD-Kit-Modules/model-IDK-1110WR-55WSA1E.htm

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 .../display/panel/advantech,idk-1110wr.yaml        | 69 ++++++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
new file mode 100644
index 0000000..e5fdaa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-1110wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-1110WR 10.1" WSVGA LVDS Display Panel
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: lvds.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: advantech,idk-1110wr
+      - {} # panel-lvds, but not listed here to avoid false select
+
+  data-mapping:
+    const: jeida-24
+
+  width-mm:
+    const: 223
+
+  height-mm:
+    const: 125
+
+  panel-timing: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |+
+    panel {
+      compatible = "advantech,idk-1110wr", "panel-lvds";
+
+      width-mm = <223>;
+      height-mm = <125>;
+
+      data-mapping = "jeida-24";
+
+      panel-timing {
+        /* 1024x600 @60Hz */
+        clock-frequency = <51200000>;
+        hactive = <1024>;
+        vactive = <600>;
+        hsync-len = <240>;
+        hfront-porch = <40>;
+        hback-porch = <40>;
+        vsync-len = <10>;
+        vfront-porch = <15>;
+        vback-porch = <10>;
+      };
+
+      port {
+        panel_in: endpoint {
+          remote-endpoint = <&lvds_encoder>;
+        };
+      };
+    };
+
+...
-- 
2.7.4

[PATCH 2/2] arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display

[Fabrizio Castro]

The HiHope RZ/G2M is advertised as compatible with panel idk-1110wr
from Advantech, however the panel isn't sold alongside the board.
A new dts, adding everything that's required to get the panel to
work the HiHope RZ/G2M, is the most convenient way to support the
HiHope RZ/G2M when it's connected to the idk-1110wr.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/Makefile               |  1 +
 .../r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts        | 86 ++++++++++++++++++++++
 2 files changed, 87 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 42b74c2..5d94301 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
 dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
new file mode 100644
index 0000000..67fe04c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M sub board connected to an
+ * Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+
+/ {
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 50000>;
+
+		brightness-levels = <0 2 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	panel-lvds {
+		compatible = "advantech,idk-1110wr", "panel-lvds";
+
+		width-mm = <223>;
+		height-mm = <125>;
+
+		data-mapping = "jeida-24";
+
+		panel-timing {
+			/* 1024x600 @60Hz */
+			clock-frequency = <51200000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <240>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			vfront-porch = <15>;
+			vback-porch = <10>;
+			vsync-len = <10>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	/*
+	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
+	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
+	 */
+	lvds-connector-en-gpio{
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pfc {
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
-- 
2.7.4

Re: [PATCH 2/2] arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display

[Geert Uytterhoeven]

Hi Fabrizio,

On Thu, Aug 29, 2019 at 12:22 PM Fabrizio Castro
<fabrizio.castro@bp.renesas.com> wrote:
> The HiHope RZ/G2M is advertised as compatible with panel idk-1110wr
> from Advantech, however the panel isn't sold alongside the board.
> A new dts, adding everything that's required to get the panel to
> work the HiHope RZ/G2M, is the most convenient way to support the
> HiHope RZ/G2M when it's connected to the idk-1110wr.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Thanks for your patch!

> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts

> +&gpio1 {
> +       /*
> +        * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
> +        * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
> +        */
> +       lvds-connector-en-gpio{

Missing space before curly brace.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH 2/2] arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display

[Fabrizio Castro]

Hi Geert,

Thank you for your feedback!

> From: Geert Uytterhoeven <geert@linux-m68k.org>
> Sent: 29 August 2019 11:51
> Subject: Re: [PATCH 2/2] arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display
> 
> Hi Fabrizio,
> 
> On Thu, Aug 29, 2019 at 12:22 PM Fabrizio Castro
> <fabrizio.castro@bp.renesas.com> wrote:
> > The HiHope RZ/G2M is advertised as compatible with panel idk-1110wr
> > from Advantech, however the panel isn't sold alongside the board.
> > A new dts, adding everything that's required to get the panel to
> > work the HiHope RZ/G2M, is the most convenient way to support the
> > HiHope RZ/G2M when it's connected to the idk-1110wr.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> 
> Thanks for your patch!
> 
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
> 
> > +&gpio1 {
> > +       /*
> > +        * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
> > +        * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
> > +        */
> > +       lvds-connector-en-gpio{
> 
> Missing space before curly brace.

Doh, thank you for spotting this, I'll send a v2.

Cheers,
Fab

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds