linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
To: Neil Armstrong <narmstrong@baylibre.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Andrzej Hajda <a.hajda@samsung.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	Biju Das <biju.das@bp.renesas.com>,
	"linux-renesas-soc@vger.kernel.org" 
	<linux-renesas-soc@vger.kernel.org>,
	Simon Horman <horms@verge.net.au>,
	Jacopo Mondi <jacopo+renesas@jmondi.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Peter Rosin <peda@axentia.se>
Subject: RE: [PATCH 1/4] drm/bridge: Repurpose lvds-encoder.c
Date: Mon, 4 Nov 2019 10:42:33 +0000	[thread overview]
Message-ID: <TY1PR01MB1770C9189BE24444BECCDC28C07F0@TY1PR01MB1770.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <870bea7e-5e5d-c0ba-2f5d-ebd0fd493c7e@baylibre.com>

Hi Neil,

Thank you for your feedback!

> From: Neil Armstrong <narmstrong@baylibre.com>
> Sent: 04 November 2019 09:18
> Subject: Re: [PATCH 1/4] drm/bridge: Repurpose lvds-encoder.c
> 
> Hi,
> 
> On 30/10/2019 14:43, Fabrizio Castro wrote:
> > lvds-encoder.c implementation is also suitable for LVDS decoders,
> > not just LVDS encoders.
> > Instead of creating a new driver for addressing support for
> > transparent LVDS decoders, repurpose lvds-encoder.c for the greater
> > good.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > ---
> >  drivers/gpu/drm/bridge/Kconfig        |   8 +-
> >  drivers/gpu/drm/bridge/Makefile       |   2 +-
> >  drivers/gpu/drm/bridge/lvds-codec.c   | 169 ++++++++++++++++++++++++++++++++++
> >  drivers/gpu/drm/bridge/lvds-encoder.c | 155 -------------------------------
> >  4 files changed, 174 insertions(+), 160 deletions(-)
> >  create mode 100644 drivers/gpu/drm/bridge/lvds-codec.c
> >  delete mode 100644 drivers/gpu/drm/bridge/lvds-encoder.c
> >
> > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> > index 3436297..9e75ca4e 100644
> > --- a/drivers/gpu/drm/bridge/Kconfig
> > +++ b/drivers/gpu/drm/bridge/Kconfig
> > @@ -45,14 +45,14 @@ config DRM_DUMB_VGA_DAC
> >  	  Support for non-programmable RGB to VGA DAC bridges, such as ADI
> >  	  ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs.
> >
> > -config DRM_LVDS_ENCODER
> > -	tristate "Transparent parallel to LVDS encoder support"
> > +config DRM_LVDS_CODEC
> 
> 
> I'm not CCed on other patches, but I'm pretty sure you should fix other
> Kconfig and defconfigs selecting this config in this patch to avoid breaking bisect.

My understanding is that no defconfig and no other option refer directly to DRM_LVDS_ENCODER, do you mind being a little bit more specific here?

Thanks,
Fab

> 
> Neil
> 
> > +	tristate "Transparent LVDS encoders and decoders support"
> >  	depends on OF
> >  	select DRM_KMS_HELPER
> >  	select DRM_PANEL_BRIDGE
> >  	help
> > -	  Support for transparent parallel to LVDS encoders that don't require
> > -	  any configuration.
> > +	  Support for transparent LVDS encoders and LVDS decoders that don't
> > +	  require any configuration.
> >
> >  config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
> >  	tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw"
> > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> > index 4934fcf..8a9178a 100644
> > --- a/drivers/gpu/drm/bridge/Makefile
> > +++ b/drivers/gpu/drm/bridge/Makefile
> > @@ -2,7 +2,7 @@
> >  obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
> >  obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
> >  obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
> > -obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o
> > +obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
> >  obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
> >  obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> >  obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c
> > new file mode 100644
> > index 0000000..8a1979c
> > --- /dev/null
> > +++ b/drivers/gpu/drm/bridge/lvds-codec.c
> > @@ -0,0 +1,169 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > + */
> > +
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_graph.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include <drm/drm_bridge.h>
> > +#include <drm/drm_panel.h>
> > +
> > +struct lvds_codec {
> > +	struct drm_bridge bridge;
> > +	struct drm_bridge *panel_bridge;
> > +	struct gpio_desc *powerdown_gpio;
> > +	u32 connector_type;
> > +};
> > +
> > +static int lvds_codec_attach(struct drm_bridge *bridge)
> > +{
> > +	struct lvds_codec *lvds_codec = container_of(bridge,
> > +							 struct lvds_codec,
> > +							 bridge);
> > +
> > +	return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge,
> > +				 bridge);
> > +}
> > +
> > +static void lvds_codec_enable(struct drm_bridge *bridge)
> > +{
> > +	struct lvds_codec *lvds_codec = container_of(bridge,
> > +							 struct lvds_codec,
> > +							 bridge);
> > +
> > +	if (lvds_codec->powerdown_gpio)
> > +		gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0);
> > +}
> > +
> > +static void lvds_codec_disable(struct drm_bridge *bridge)
> > +{
> > +	struct lvds_codec *lvds_codec = container_of(bridge,
> > +							 struct lvds_codec,
> > +							 bridge);
> > +
> > +	if (lvds_codec->powerdown_gpio)
> > +		gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1);
> > +}
> > +
> > +static struct drm_bridge_funcs funcs = {
> > +	.attach = lvds_codec_attach,
> > +	.enable = lvds_codec_enable,
> > +	.disable = lvds_codec_disable,
> > +};
> > +
> > +static int lvds_codec_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct device_node *port;
> > +	struct device_node *endpoint;
> > +	struct device_node *panel_node;
> > +	struct drm_panel *panel;
> > +	struct lvds_codec *lvds_codec;
> > +
> > +	lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
> > +	if (!lvds_codec)
> > +		return -ENOMEM;
> > +
> > +	lvds_codec->connector_type = (u32)
> > +		of_device_get_match_data(&pdev->dev);
> > +	lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
> > +							       GPIOD_OUT_HIGH);
> > +	if (IS_ERR(lvds_codec->powerdown_gpio)) {
> > +		int err = PTR_ERR(lvds_codec->powerdown_gpio);
> > +
> > +		if (err != -EPROBE_DEFER)
> > +			dev_err(dev, "powerdown GPIO failure: %d\n", err);
> > +		return err;
> > +	}
> > +
> > +	/* Locate the panel DT node. */
> > +	port = of_graph_get_port_by_id(dev->of_node, 1);
> > +	if (!port) {
> > +		dev_dbg(dev, "port 1 not found\n");
> > +		return -ENXIO;
> > +	}
> > +
> > +	endpoint = of_get_child_by_name(port, "endpoint");
> > +	of_node_put(port);
> > +	if (!endpoint) {
> > +		dev_dbg(dev, "no endpoint for port 1\n");
> > +		return -ENXIO;
> > +	}
> > +
> > +	panel_node = of_graph_get_remote_port_parent(endpoint);
> > +	of_node_put(endpoint);
> > +	if (!panel_node) {
> > +		dev_dbg(dev, "no remote endpoint for port 1\n");
> > +		return -ENXIO;
> > +	}
> > +
> > +	panel = of_drm_find_panel(panel_node);
> > +	of_node_put(panel_node);
> > +	if (IS_ERR(panel)) {
> > +		dev_dbg(dev, "panel not found, deferring probe\n");
> > +		return PTR_ERR(panel);
> > +	}
> > +
> > +	lvds_codec->panel_bridge =
> > +		devm_drm_panel_bridge_add_typed(dev, panel,
> > +						lvds_codec->connector_type);
> > +	if (IS_ERR(lvds_codec->panel_bridge))
> > +		return PTR_ERR(lvds_codec->panel_bridge);
> > +
> > +	/* The panel_bridge bridge is attached to the panel's of_node,
> > +	 * but we need a bridge attached to our of_node for our user
> > +	 * to look up.
> > +	 */
> > +	lvds_codec->bridge.of_node = dev->of_node;
> > +	lvds_codec->bridge.funcs = &funcs;
> > +	drm_bridge_add(&lvds_codec->bridge);
> > +
> > +	platform_set_drvdata(pdev, lvds_codec);
> > +
> > +	return 0;
> > +}
> > +
> > +static int lvds_codec_remove(struct platform_device *pdev)
> > +{
> > +	struct lvds_codec *lvds_codec = platform_get_drvdata(pdev);
> > +
> > +	drm_bridge_remove(&lvds_codec->bridge);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id lvds_codec_match[] = {
> > +	{
> > +		.compatible = "lvds-encoder",
> > +		.data = (void *)DRM_MODE_CONNECTOR_LVDS
> > +	},
> > +	{
> > +		.compatible = "thine,thc63lvdm83d",
> > +		.data = (void *)DRM_MODE_CONNECTOR_LVDS,
> > +	},
> > +	{
> > +		.compatible = "lvds-decoder",
> > +		.data = (void *)DRM_MODE_CONNECTOR_Unknown,
> > +	},
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, lvds_codec_match);
> > +
> > +static struct platform_driver lvds_codec_driver = {
> > +	.probe	= lvds_codec_probe,
> > +	.remove	= lvds_codec_remove,
> > +	.driver		= {
> > +		.name		= "lvds-codec",
> > +		.of_match_table	= lvds_codec_match,
> > +	},
> > +};
> > +module_platform_driver(lvds_codec_driver);
> > +
> > +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
> > +MODULE_DESCRIPTION("Driver for transparent LVDS encoders and LVDS decoders");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/gpu/drm/bridge/lvds-encoder.c b/drivers/gpu/drm/bridge/lvds-encoder.c
> > deleted file mode 100644
> > index e2132a8..0000000
> > --- a/drivers/gpu/drm/bridge/lvds-encoder.c
> > +++ /dev/null
> > @@ -1,155 +0,0 @@
> > -// SPDX-License-Identifier: GPL-2.0-or-later
> > -/*
> > - * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > - */
> > -
> > -#include <linux/gpio/consumer.h>
> > -#include <linux/module.h>
> > -#include <linux/of.h>
> > -#include <linux/of_graph.h>
> > -#include <linux/platform_device.h>
> > -
> > -#include <drm/drm_bridge.h>
> > -#include <drm/drm_panel.h>
> > -
> > -struct lvds_encoder {
> > -	struct drm_bridge bridge;
> > -	struct drm_bridge *panel_bridge;
> > -	struct gpio_desc *powerdown_gpio;
> > -};
> > -
> > -static int lvds_encoder_attach(struct drm_bridge *bridge)
> > -{
> > -	struct lvds_encoder *lvds_encoder = container_of(bridge,
> > -							 struct lvds_encoder,
> > -							 bridge);
> > -
> > -	return drm_bridge_attach(bridge->encoder, lvds_encoder->panel_bridge,
> > -				 bridge);
> > -}
> > -
> > -static void lvds_encoder_enable(struct drm_bridge *bridge)
> > -{
> > -	struct lvds_encoder *lvds_encoder = container_of(bridge,
> > -							 struct lvds_encoder,
> > -							 bridge);
> > -
> > -	if (lvds_encoder->powerdown_gpio)
> > -		gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 0);
> > -}
> > -
> > -static void lvds_encoder_disable(struct drm_bridge *bridge)
> > -{
> > -	struct lvds_encoder *lvds_encoder = container_of(bridge,
> > -							 struct lvds_encoder,
> > -							 bridge);
> > -
> > -	if (lvds_encoder->powerdown_gpio)
> > -		gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 1);
> > -}
> > -
> > -static struct drm_bridge_funcs funcs = {
> > -	.attach = lvds_encoder_attach,
> > -	.enable = lvds_encoder_enable,
> > -	.disable = lvds_encoder_disable,
> > -};
> > -
> > -static int lvds_encoder_probe(struct platform_device *pdev)
> > -{
> > -	struct device *dev = &pdev->dev;
> > -	struct device_node *port;
> > -	struct device_node *endpoint;
> > -	struct device_node *panel_node;
> > -	struct drm_panel *panel;
> > -	struct lvds_encoder *lvds_encoder;
> > -
> > -	lvds_encoder = devm_kzalloc(dev, sizeof(*lvds_encoder), GFP_KERNEL);
> > -	if (!lvds_encoder)
> > -		return -ENOMEM;
> > -
> > -	lvds_encoder->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
> > -							       GPIOD_OUT_HIGH);
> > -	if (IS_ERR(lvds_encoder->powerdown_gpio)) {
> > -		int err = PTR_ERR(lvds_encoder->powerdown_gpio);
> > -
> > -		if (err != -EPROBE_DEFER)
> > -			dev_err(dev, "powerdown GPIO failure: %d\n", err);
> > -		return err;
> > -	}
> > -
> > -	/* Locate the panel DT node. */
> > -	port = of_graph_get_port_by_id(dev->of_node, 1);
> > -	if (!port) {
> > -		dev_dbg(dev, "port 1 not found\n");
> > -		return -ENXIO;
> > -	}
> > -
> > -	endpoint = of_get_child_by_name(port, "endpoint");
> > -	of_node_put(port);
> > -	if (!endpoint) {
> > -		dev_dbg(dev, "no endpoint for port 1\n");
> > -		return -ENXIO;
> > -	}
> > -
> > -	panel_node = of_graph_get_remote_port_parent(endpoint);
> > -	of_node_put(endpoint);
> > -	if (!panel_node) {
> > -		dev_dbg(dev, "no remote endpoint for port 1\n");
> > -		return -ENXIO;
> > -	}
> > -
> > -	panel = of_drm_find_panel(panel_node);
> > -	of_node_put(panel_node);
> > -	if (IS_ERR(panel)) {
> > -		dev_dbg(dev, "panel not found, deferring probe\n");
> > -		return PTR_ERR(panel);
> > -	}
> > -
> > -	lvds_encoder->panel_bridge =
> > -		devm_drm_panel_bridge_add_typed(dev, panel,
> > -						DRM_MODE_CONNECTOR_LVDS);
> > -	if (IS_ERR(lvds_encoder->panel_bridge))
> > -		return PTR_ERR(lvds_encoder->panel_bridge);
> > -
> > -	/* The panel_bridge bridge is attached to the panel's of_node,
> > -	 * but we need a bridge attached to our of_node for our user
> > -	 * to look up.
> > -	 */
> > -	lvds_encoder->bridge.of_node = dev->of_node;
> > -	lvds_encoder->bridge.funcs = &funcs;
> > -	drm_bridge_add(&lvds_encoder->bridge);
> > -
> > -	platform_set_drvdata(pdev, lvds_encoder);
> > -
> > -	return 0;
> > -}
> > -
> > -static int lvds_encoder_remove(struct platform_device *pdev)
> > -{
> > -	struct lvds_encoder *lvds_encoder = platform_get_drvdata(pdev);
> > -
> > -	drm_bridge_remove(&lvds_encoder->bridge);
> > -
> > -	return 0;
> > -}
> > -
> > -static const struct of_device_id lvds_encoder_match[] = {
> > -	{ .compatible = "lvds-encoder" },
> > -	{ .compatible = "thine,thc63lvdm83d" },
> > -	{},
> > -};
> > -MODULE_DEVICE_TABLE(of, lvds_encoder_match);
> > -
> > -static struct platform_driver lvds_encoder_driver = {
> > -	.probe	= lvds_encoder_probe,
> > -	.remove	= lvds_encoder_remove,
> > -	.driver		= {
> > -		.name		= "lvds-encoder",
> > -		.of_match_table	= lvds_encoder_match,
> > -	},
> > -};
> > -module_platform_driver(lvds_encoder_driver);
> > -
> > -MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
> > -MODULE_DESCRIPTION("Transparent parallel to LVDS encoder");
> > -MODULE_LICENSE("GPL");
> >


  reply	other threads:[~2019-11-04 10:42 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-30 13:43 [PATCH 0/4] Add LCD panel support to iwg20d Fabrizio Castro
2019-10-30 13:43 ` [PATCH 1/4] drm/bridge: Repurpose lvds-encoder.c Fabrizio Castro
2019-11-04  9:18   ` Neil Armstrong
2019-11-04 10:42     ` Fabrizio Castro [this message]
2019-11-04 15:49       ` Neil Armstrong
2019-11-08  9:20       ` Geert Uytterhoeven
2019-11-08 12:13         ` Fabrizio Castro
2019-10-30 13:43 ` [PATCH 2/4] dt-bindings: display: bridge: Repurpose lvds-encoder Fabrizio Castro
2019-11-04  9:17   ` Neil Armstrong
2019-11-04 10:37     ` Fabrizio Castro
2019-10-30 13:43 ` [PATCH 3/4] ARM: dts: iwg20d-q7-common: Add LCD support Fabrizio Castro
2019-10-30 13:43 ` [PATCH 4/4] ARM: shmobile_defconfig: Enable support for panels from EDT Fabrizio Castro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=TY1PR01MB1770C9189BE24444BECCDC28C07F0@TY1PR01MB1770.jpnprd01.prod.outlook.com \
    --to=fabrizio.castro@bp.renesas.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=biju.das@bp.renesas.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert+renesas@glider.be \
    --cc=horms@verge.net.au \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=narmstrong@baylibre.com \
    --cc=peda@axentia.se \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).