From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/4] arm64: dts: renesas: salvator-x(s): Factor out common optional parts
Date: Tue, 8 Jun 2021 13:17:48 +0200 [thread overview]
Message-ID: <YL9R3DUV+iZocvn+@oden.dyn.berto.se> (raw)
In-Reply-To: <cover.1623087028.git.geert+renesas@glider.be>
Hi Geert,
Thanks for your work.
On 2021-06-07 19:39:01 +0200, Geert Uytterhoeven wrote:
> Hi all,
>
> The Renesas Salvator-X(S) family of boards are available with different
> SiP options (R-Car H3 ES1.x, H3 ES2.0+, M3-W, M3-W+, M3-N). To reduce
> duplication of board descriptions, the parts common to all SoC and board
> combinations are already factored out into salvator-common.dtsi,
> salvator-x.dtsi, and salvator-xs.dtsi. Still, there are a few board
> features that are not common to all combos, as the corresponding support
> is not present on all SoCs.
>
> Hence this patch series moves out support for the second HDMI channel,
> the SATA interface, and the third and fourth USB channels to
> salvator-common.dtsi and/or salvator-xs.dtsi. As these are not present
> on all SoCs, its descriptions are protected by SOC_HAS_* preprocessor
> symbols, defined in SoC-specific .dtsi files.
>
> This series causes no changes in the generated DTB, except for the
> enablement of the SATA device node on Salvator-X board with an R-Car
> M3-N SiP, cfr. the comments in [PATCH 2/4].
>
> Thanks for your comments!
With a bit more of logic in dts files we might get back to board files
;-) For the whole series,
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>
> Geert Uytterhoeven (4):
> arm64: dts: renesas: salvator-x(s): Factor out HDMI1 parts
> arm64: dts: renesas: salvator-x(s): Factor out SATA parts
> arm64: dts: renesas: salvator-x(s): Factor out USB ch2 parts
> arm64: dts: renesas: salvator-xs: Factor out USB ch3 parts
>
> .../boot/dts/renesas/r8a77950-salvator-x.dts | 73 -----------
> arch/arm64/boot/dts/renesas/r8a77950.dtsi | 2 +
> .../boot/dts/renesas/r8a77951-salvator-x.dts | 73 -----------
> .../boot/dts/renesas/r8a77951-salvator-xs.dts | 122 ------------------
> arch/arm64/boot/dts/renesas/r8a77951.dtsi | 5 +
> .../boot/dts/renesas/r8a77965-salvator-xs.dts | 14 --
> arch/arm64/boot/dts/renesas/r8a77965.dtsi | 2 +
> .../boot/dts/renesas/salvator-common.dtsi | 76 ++++++++++-
> arch/arm64/boot/dts/renesas/salvator-xs.dtsi | 56 ++++++++
> 9 files changed, 140 insertions(+), 283 deletions(-)
>
> --
> 2.25.1
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
--
Regards,
Niklas Söderlund
prev parent reply other threads:[~2021-06-08 11:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-07 17:39 [PATCH 0/4] arm64: dts: renesas: salvator-x(s): Factor out common optional parts Geert Uytterhoeven
2021-06-07 17:39 ` [PATCH 1/4] arm64: dts: renesas: salvator-x(s): Factor out HDMI1 parts Geert Uytterhoeven
2021-06-07 17:39 ` [PATCH 2/4] arm64: dts: renesas: salvator-x(s): Factor out SATA parts Geert Uytterhoeven
2021-06-07 17:39 ` [PATCH 3/4] arm64: dts: renesas: salvator-x(s): Factor out USB ch2 parts Geert Uytterhoeven
2021-06-07 17:39 ` [PATCH 4/4] arm64: dts: renesas: salvator-xs: Factor out USB ch3 parts Geert Uytterhoeven
2021-06-08 11:17 ` Niklas Söderlund [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YL9R3DUV+iZocvn+@oden.dyn.berto.se \
--to=niklas.soderlund@ragnatech.se \
--cc=geert+renesas@glider.be \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).