linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Kieran Bingham <kieran.bingham@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	"open list:DRM DRIVERS FOR RENESAS"
	<dri-devel@lists.freedesktop.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 6/6] drm: rcar-du: Add r8a779a0 device support
Date: Thu, 23 Sep 2021 02:59:48 +0300	[thread overview]
Message-ID: <YUvDdFeD64+PuHSC@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20210922234726.3337265-7-kieran.bingham@ideasonboard.com>

Hi Kieran,

Thank you for the patch.

On Thu, Sep 23, 2021 at 12:47:26AM +0100, Kieran Bingham wrote:
> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> 
> Extend the rcar_du_device_info structure and rcar_du_output enum to
> support DSI outputs and utilise these additions to provide support for
> the R8A779A0 V3U platform.
> 
> While the DIDSR register field is now named "DSI/CSI-2-TX-IF0 Dot Clock
> Select" the existing define LVDS0 is used, and is directly compatible
> from other DU variants.

That's not true anymore :-) The paragraph can simply be dropped.

> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> 
> ---
> 
> v3:
>  - Introduce DIDSR_LDCS_DSI macro
> 
> v2:
>  - No longer requires a direct interface with the DSI encoder
>  - Use correct field naming (LDCS)
>  - Remove per-crtc clock feature.
> 
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.h  |  2 ++
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c   | 20 ++++++++++++++++++++
>  drivers/gpu/drm/rcar-du/rcar_du_drv.h   |  2 ++
>  drivers/gpu/drm/rcar-du/rcar_du_group.c |  2 ++
>  drivers/gpu/drm/rcar-du/rcar_du_regs.h  |  1 +
>  5 files changed, 27 insertions(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> index 440e6b4fbb58..26e79b74898c 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> @@ -96,6 +96,8 @@ struct rcar_du_crtc_state {
>  enum rcar_du_output {
>  	RCAR_DU_OUTPUT_DPAD0,
>  	RCAR_DU_OUTPUT_DPAD1,
> +	RCAR_DU_OUTPUT_DSI0,
> +	RCAR_DU_OUTPUT_DSI1,
>  	RCAR_DU_OUTPUT_HDMI0,
>  	RCAR_DU_OUTPUT_HDMI1,
>  	RCAR_DU_OUTPUT_LVDS0,
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> index 8a094d5b9c77..8b4c8851b6bc 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -489,6 +489,25 @@ static const struct rcar_du_device_info rcar_du_r8a7799x_info = {
>  	.lvds_clk_mask =  BIT(1) | BIT(0),
>  };
>  
> +static const struct rcar_du_device_info rcar_du_r8a779a0_info = {
> +	.gen = 3,
> +	.features = RCAR_DU_FEATURE_CRTC_IRQ
> +		  | RCAR_DU_FEATURE_VSP1_SOURCE,
> +	.channels_mask = BIT(1) | BIT(0),
> +	.routes = {
> +		/* R8A779A0 has two MIPI DSI outputs. */
> +		[RCAR_DU_OUTPUT_DSI0] = {
> +			.possible_crtcs = BIT(0),
> +			.port = 0,
> +		},
> +		[RCAR_DU_OUTPUT_DSI1] = {
> +			.possible_crtcs = BIT(1),
> +			.port = 1,
> +		},
> +	},
> +	.dsi_clk_mask =  BIT(1) | BIT(0),
> +};
> +
>  static const struct of_device_id rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info },
>  	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> @@ -513,6 +532,7 @@ static const struct of_device_id rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a77980", .data = &rcar_du_r8a77970_info },
>  	{ .compatible = "renesas,du-r8a77990", .data = &rcar_du_r8a7799x_info },
>  	{ .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info },
> +	{ .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info },
>  	{ }
>  };
>  
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> index 5fe9152454ff..cf98d43d72d0 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> @@ -57,6 +57,7 @@ struct rcar_du_output_routing {
>   * @routes: array of CRTC to output routes, indexed by output (RCAR_DU_OUTPUT_*)
>   * @num_lvds: number of internal LVDS encoders
>   * @dpll_mask: bit mask of DU channels equipped with a DPLL
> + * @dsi_clk_mask: bitmask of channels that can use the DSI clock as dot clock
>   * @lvds_clk_mask: bitmask of channels that can use the LVDS clock as dot clock
>   */
>  struct rcar_du_device_info {
> @@ -67,6 +68,7 @@ struct rcar_du_device_info {
>  	struct rcar_du_output_routing routes[RCAR_DU_OUTPUT_MAX];
>  	unsigned int num_lvds;
>  	unsigned int dpll_mask;
> +	unsigned int dsi_clk_mask;
>  	unsigned int lvds_clk_mask;
>  };
>  
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> index a984eef265d2..8665a1dd2186 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> @@ -124,6 +124,8 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp)
>  		if (rcdu->info->lvds_clk_mask & BIT(rcrtc->index))
>  			didsr |= DIDSR_LDCS_LVDS0(i)
>  			      |  DIDSR_PDCS_CLK(i, 0);
> +		else if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index))
> +			didsr |= DIDSR_LDCS_DSI(i);
>  		else
>  			didsr |= DIDSR_LDCS_DCLKIN(i)
>  			      |  DIDSR_PDCS_CLK(i, 0);
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_regs.h b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
> index fb7c467aa484..9484215b51e2 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_regs.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
> @@ -258,6 +258,7 @@
>  #define DIDSR			0x20028
>  #define DIDSR_CODE		(0x7790 << 16)
>  #define DIDSR_LDCS_DCLKIN(n)	(0 << (8 + (n) * 2))
> +#define DIDSR_LDCS_DSI(n)	(2 << (8 + (n) * 2))

I'd add a /* V3U only */ comment at the end.

I can address those two small issues when applying.

>  #define DIDSR_LDCS_LVDS0(n)	(2 << (8 + (n) * 2))
>  #define DIDSR_LDCS_LVDS1(n)	(3 << (8 + (n) * 2))
>  #define DIDSR_LDCS_MASK(n)	(3 << (8 + (n) * 2))

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2021-09-22 23:59 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-22 23:47 [PATCH v3 0/6] drm: rcar-du: V3U Support Kieran Bingham
2021-09-22 23:47 ` [PATCH v3 1/6] dt-bindings: display: renesas,du: Provide bindings for r8a779a0 Kieran Bingham
2021-09-23  7:43   ` Geert Uytterhoeven
2021-09-23 13:01   ` [PATCH v3.1] " Kieran Bingham
2021-09-27 20:57     ` Rob Herring
2021-09-28  1:11       ` Laurent Pinchart
2021-09-22 23:47 ` [PATCH v3 2/6] drm: rcar-du: Sort the DU outputs Kieran Bingham
2021-09-22 23:47 ` [PATCH v3 3/6] drm: rcar-du: Only initialise TVM_TVSYNC mode when supported Kieran Bingham
2021-09-22 23:47 ` [PATCH v3 4/6] drm: rcar-du: Fix DIDSR field name Kieran Bingham
2021-09-22 23:47 ` [PATCH v3 5/6] drm: rcar-du: Split CRTC IRQ and Clock features Kieran Bingham
2021-09-22 23:47 ` [PATCH v3 6/6] drm: rcar-du: Add r8a779a0 device support Kieran Bingham
2021-09-22 23:59   ` Laurent Pinchart [this message]
2021-09-23  0:32     ` Kieran Bingham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YUvDdFeD64+PuHSC@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).