linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
@ 2018-11-06 20:46 Marek Vasut
  2018-11-07  8:50 ` Wolfram Sang
                   ` (4 more replies)
  0 siblings, 5 replies; 18+ messages in thread
From: Marek Vasut @ 2018-11-06 20:46 UTC (permalink / raw)
  To: devicetree
  Cc: Takeshi Kihara, Marek Vasut, Geert Uytterhoeven, Simon Horman,
	Wolfram Sang, Yoshihiro Shimoda, linux-renesas-soc,
	linux-arm-kernel

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC
and enables SD card slot connected to SDHI0, micro SD card slot
connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board
using the R8A77990 SoC.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
---
V2: - Deduplicated regular and UHS pins
    - Added sdhi3_ds pin pinmux
V3: - Squash two patches, one adding SDHI nodes to R8A77990 E3 DTSI
      and another enabling them on E3 Ebisu, together.
---
 .../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 130 ++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77990.dtsi     |  36 +++++
 2 files changed, 166 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 0b5aead76077..306b35f0f541 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -129,6 +129,15 @@
 		};
 	};
 
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	reg_3p3v: regulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -180,6 +189,54 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
 };
 
 &audio_clk_a {
@@ -415,6 +472,36 @@
 		function = "scif2";
 	};
 
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
 	sound_pins: sound {
 		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
 		function = "ssi";
@@ -531,3 +618,46 @@
 
 	status = "okay";
 };
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi3 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index beb53aaa9e2c..e0092fb27ec0 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1351,6 +1351,42 @@
 			status = "disabled";
 		};
 
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-06 20:46 [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes Marek Vasut
@ 2018-11-07  8:50 ` Wolfram Sang
  2018-11-07 10:59   ` Marek Vasut
  2018-11-07 11:19 ` Simon Horman
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 18+ messages in thread
From: Wolfram Sang @ 2018-11-07  8:50 UTC (permalink / raw)
  To: Marek Vasut
  Cc: devicetree, Takeshi Kihara, Marek Vasut, Geert Uytterhoeven,
	Simon Horman, Yoshihiro Shimoda, linux-renesas-soc,
	linux-arm-kernel

[-- Attachment #1: Type: text/plain, Size: 643 bytes --]

On Tue, Nov 06, 2018 at 09:46:47PM +0100, Marek Vasut wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> 
> This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC
> and enables SD card slot connected to SDHI0, micro SD card slot
> connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board
> using the R8A77990 SoC.
> 
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Out of curiosity: have you tested HS400 on that board based on Niklas'
recent patches as well?


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-07  8:50 ` Wolfram Sang
@ 2018-11-07 10:59   ` Marek Vasut
  2018-11-07 13:08     ` Wolfram Sang
  0 siblings, 1 reply; 18+ messages in thread
From: Marek Vasut @ 2018-11-07 10:59 UTC (permalink / raw)
  To: Wolfram Sang
  Cc: devicetree, Takeshi Kihara, Marek Vasut, Geert Uytterhoeven,
	Simon Horman, Yoshihiro Shimoda, linux-renesas-soc,
	linux-arm-kernel

On 11/07/2018 09:50 AM, Wolfram Sang wrote:
> On Tue, Nov 06, 2018 at 09:46:47PM +0100, Marek Vasut wrote:
>> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>>
>> This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC
>> and enables SD card slot connected to SDHI0, micro SD card slot
>> connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board
>> using the R8A77990 SoC.
>>
>> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> 
> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Out of curiosity: have you tested HS400 on that board based on Niklas'
> recent patches as well?

Nope. I tried that patchset on M3N again yesterday and got error -84
while initing the eMMC, so I need to look into that first. Then I'll
try it on E3.

-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-06 20:46 [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes Marek Vasut
  2018-11-07  8:50 ` Wolfram Sang
@ 2018-11-07 11:19 ` Simon Horman
  2018-11-08 12:00 ` Geert Uytterhoeven
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 18+ messages in thread
From: Simon Horman @ 2018-11-07 11:19 UTC (permalink / raw)
  To: Marek Vasut
  Cc: devicetree, Takeshi Kihara, Marek Vasut, Geert Uytterhoeven,
	Wolfram Sang, Yoshihiro Shimoda, linux-renesas-soc,
	linux-arm-kernel

On Tue, Nov 06, 2018 at 09:46:47PM +0100, Marek Vasut wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> 
> This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC
> and enables SD card slot connected to SDHI0, micro SD card slot
> connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board
> using the R8A77990 SoC.
> 
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Simon Horman <horms+renesas@verge.net.au>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Cc: linux-renesas-soc@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> ---
> V2: - Deduplicated regular and UHS pins
>     - Added sdhi3_ds pin pinmux
> V3: - Squash two patches, one adding SDHI nodes to R8A77990 E3 DTSI
>       and another enabling them on E3 Ebisu, together.
> ---
>  .../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 130 ++++++++++++++++++
>  arch/arm64/boot/dts/renesas/r8a77990.dtsi     |  36 +++++
>  2 files changed, 166 insertions(+)

Thanks, applied for v4.21.

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-07 10:59   ` Marek Vasut
@ 2018-11-07 13:08     ` Wolfram Sang
  2018-11-07 13:19       ` Marek Vasut
  0 siblings, 1 reply; 18+ messages in thread
From: Wolfram Sang @ 2018-11-07 13:08 UTC (permalink / raw)
  To: Marek Vasut, Niklas Söderlund
  Cc: devicetree, Takeshi Kihara, Marek Vasut, Geert Uytterhoeven,
	Simon Horman, Yoshihiro Shimoda, linux-renesas-soc,
	linux-arm-kernel

[-- Attachment #1: Type: text/plain, Size: 381 bytes --]


> Nope. I tried that patchset on M3N again yesterday and got error -84
> while initing the eMMC, so I need to look into that first. Then I'll
> try it on E3.

Hmmm, we tried M3N at the hackfest and it worked great there.

First idea: are you sure you have all depending patch series applied as
well?

@Niklas: Have you/can you push a publich branch out with everything
included.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-07 13:08     ` Wolfram Sang
@ 2018-11-07 13:19       ` Marek Vasut
  2018-11-07 19:23         ` Wolfram Sang
  0 siblings, 1 reply; 18+ messages in thread
From: Marek Vasut @ 2018-11-07 13:19 UTC (permalink / raw)
  To: Wolfram Sang, Niklas Söderlund
  Cc: devicetree, Takeshi Kihara, Marek Vasut, Geert Uytterhoeven,
	Simon Horman, Yoshihiro Shimoda, linux-renesas-soc,
	linux-arm-kernel

On 11/07/2018 02:08 PM, Wolfram Sang wrote:
> 
>> Nope. I tried that patchset on M3N again yesterday and got error -84
>> while initing the eMMC, so I need to look into that first. Then I'll
>> try it on E3.
> 
> Hmmm, we tried M3N at the hackfest and it worked great there.
> 
> First idea: are you sure you have all depending patch series applied as
> well?
> 
> @Niklas: Have you/can you push a publich branch out with everything
> included.

We discussed this on IRC already, which is why I need to look into that.
The HS200 works well on the M3N though.

-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-07 13:19       ` Marek Vasut
@ 2018-11-07 19:23         ` Wolfram Sang
  2018-11-07 20:35           ` Marek Vasut
  0 siblings, 1 reply; 18+ messages in thread
From: Wolfram Sang @ 2018-11-07 19:23 UTC (permalink / raw)
  To: Marek Vasut
  Cc: Niklas Söderlund, devicetree, Takeshi Kihara, Marek Vasut,
	Geert Uytterhoeven, Simon Horman, Yoshihiro Shimoda,
	linux-renesas-soc, linux-arm-kernel

[-- Attachment #1: Type: text/plain, Size: 243 bytes --]


> We discussed this on IRC already, which is why I need to look into that.
> The HS200 works well on the M3N though.

Can you push the branch you used somewhere? I retested the branch from
Dunbar with my M3N and it works fine with my tests.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-07 19:23         ` Wolfram Sang
@ 2018-11-07 20:35           ` Marek Vasut
  0 siblings, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2018-11-07 20:35 UTC (permalink / raw)
  To: Wolfram Sang
  Cc: Niklas Söderlund, devicetree, Takeshi Kihara, Marek Vasut,
	Geert Uytterhoeven, Simon Horman, Yoshihiro Shimoda,
	linux-renesas-soc, linux-arm-kernel

On 11/07/2018 08:23 PM, Wolfram Sang wrote:
> 
>> We discussed this on IRC already, which is why I need to look into that.
>> The HS200 works well on the M3N though.
> 
> Can you push the branch you used somewhere? I retested the branch from
> Dunbar with my M3N and it works fine with my tests.

Sure.

btw I think this might even have something to do with ATF 1.0.24 or
mainline U-Boot, which switches the eMMC card to HS200 mode.

-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-06 20:46 [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes Marek Vasut
  2018-11-07  8:50 ` Wolfram Sang
  2018-11-07 11:19 ` Simon Horman
@ 2018-11-08 12:00 ` Geert Uytterhoeven
  2018-11-08 13:06   ` Simon Horman
  2018-11-20 10:16 ` Geert Uytterhoeven
  2019-01-09 10:49 ` Simon Horman
  4 siblings, 1 reply; 18+ messages in thread
From: Geert Uytterhoeven @ 2018-11-08 12:00 UTC (permalink / raw)
  To: Marek Vasut
  Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Takeshi Kihara, Marek Vasut, Geert Uytterhoeven, Simon Horman,
	Wolfram Sang, Yoshihiro Shimoda, Linux-Renesas, Linux ARM

On Tue, Nov 6, 2018 at 9:46 PM Marek Vasut <marek.vasut@gmail.com> wrote:
> Subject: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes

arm64: dts: renesas: r8a77990: ebisu: Add and enable SDHI device nodes

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-08 12:00 ` Geert Uytterhoeven
@ 2018-11-08 13:06   ` Simon Horman
  0 siblings, 0 replies; 18+ messages in thread
From: Simon Horman @ 2018-11-08 13:06 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Marek Vasut,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Takeshi Kihara, Marek Vasut, Geert Uytterhoeven, Wolfram Sang,
	Yoshihiro Shimoda, Linux-Renesas, Linux ARM

On Thu, Nov 08, 2018 at 01:00:11PM +0100, Geert Uytterhoeven wrote:
> On Tue, Nov 6, 2018 at 9:46 PM Marek Vasut <marek.vasut@gmail.com> wrote:
> > Subject: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
> 
> arm64: dts: renesas: r8a77990: ebisu: Add and enable SDHI device nodes

Thanks, fixed.

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-06 20:46 [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes Marek Vasut
                   ` (2 preceding siblings ...)
  2018-11-08 12:00 ` Geert Uytterhoeven
@ 2018-11-20 10:16 ` Geert Uytterhoeven
  2018-11-20 23:18   ` Marek Vasut
  2019-01-09 10:49 ` Simon Horman
  4 siblings, 1 reply; 18+ messages in thread
From: Geert Uytterhoeven @ 2018-11-20 10:16 UTC (permalink / raw)
  To: Marek Vasut
  Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Takeshi Kihara, Marek Vasut, Geert Uytterhoeven, Simon Horman,
	Wolfram Sang, Yoshihiro Shimoda, Linux-Renesas, Linux ARM

Hi Marek,

On Tue, Nov 6, 2018 at 9:46 PM Marek Vasut <marek.vasut@gmail.com> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC
> and enables SD card slot connected to SDHI0, micro SD card slot
> connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board
> using the R8A77990 SoC.
>
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

> --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
> @@ -129,6 +129,15 @@
>                 };
>         };
>
> +       reg_1p8v: regulator0 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "fixed-1.8V";
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <1800000>;
> +               regulator-boot-on;
> +               regulator-always-on;
> +       };
> +
>         reg_3p3v: regulator1 {
>                 compatible = "regulator-fixed";
>                 regulator-name = "fixed-3.3V";
> @@ -180,6 +189,54 @@
>                 #clock-cells = <0>;
>                 clock-frequency = <74250000>;
>         };
> +
> +       vcc_sdhi0: regulator-vcc-sdhi0 {
> +               compatible = "regulator-fixed";
> +
> +               regulator-name = "SDHI0 Vcc";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +
> +               gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
> +               enable-active-high;
> +       };
> +
> +       vccq_sdhi0: regulator-vccq-sdhi0 {
> +               compatible = "regulator-gpio";
> +
> +               regulator-name = "SDHI0 VccQ";
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <3300000>;
> +
> +               gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
> +               gpios-states = <1>;
> +               states = <3300000 1
> +                         1800000 0>;

I know this is how it's done in the example in
Documentation/devicetree/bindings/regulator/gpio-regulator.txt,
but usually brackets are used to group tuples, like:

    states = <3300000 1>, <1800000 0>;

Perhaps the example should be changed?

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-20 10:16 ` Geert Uytterhoeven
@ 2018-11-20 23:18   ` Marek Vasut
  2018-11-21  8:39     ` Geert Uytterhoeven
  0 siblings, 1 reply; 18+ messages in thread
From: Marek Vasut @ 2018-11-20 23:18 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Takeshi Kihara, Marek Vasut, Geert Uytterhoeven, Simon Horman,
	Wolfram Sang, Yoshihiro Shimoda, Linux-Renesas, Linux ARM,
	Mark Brown, Liam Girdwood

On 11/20/2018 11:16 AM, Geert Uytterhoeven wrote:
> Hi Marek,

Hi,

> On Tue, Nov 6, 2018 at 9:46 PM Marek Vasut <marek.vasut@gmail.com> wrote:
>> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>>
>> This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC
>> and enables SD card slot connected to SDHI0, micro SD card slot
>> connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board
>> using the R8A77990 SoC.
>>
>> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> 
>> --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
>> +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
>> @@ -129,6 +129,15 @@
>>                 };
>>         };
>>
>> +       reg_1p8v: regulator0 {
>> +               compatible = "regulator-fixed";
>> +               regulator-name = "fixed-1.8V";
>> +               regulator-min-microvolt = <1800000>;
>> +               regulator-max-microvolt = <1800000>;
>> +               regulator-boot-on;
>> +               regulator-always-on;
>> +       };
>> +
>>         reg_3p3v: regulator1 {
>>                 compatible = "regulator-fixed";
>>                 regulator-name = "fixed-3.3V";
>> @@ -180,6 +189,54 @@
>>                 #clock-cells = <0>;
>>                 clock-frequency = <74250000>;
>>         };
>> +
>> +       vcc_sdhi0: regulator-vcc-sdhi0 {
>> +               compatible = "regulator-fixed";
>> +
>> +               regulator-name = "SDHI0 Vcc";
>> +               regulator-min-microvolt = <3300000>;
>> +               regulator-max-microvolt = <3300000>;
>> +
>> +               gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
>> +               enable-active-high;
>> +       };
>> +
>> +       vccq_sdhi0: regulator-vccq-sdhi0 {
>> +               compatible = "regulator-gpio";
>> +
>> +               regulator-name = "SDHI0 VccQ";
>> +               regulator-min-microvolt = <1800000>;
>> +               regulator-max-microvolt = <3300000>;
>> +
>> +               gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
>> +               gpios-states = <1>;
>> +               states = <3300000 1
>> +                         1800000 0>;
> 
> I know this is how it's done in the example in
> Documentation/devicetree/bindings/regulator/gpio-regulator.txt,
> but usually brackets are used to group tuples, like:
> 
>     states = <3300000 1>, <1800000 0>;
> 
> Perhaps the example should be changed?

Well, looking through the DTS, I don't see anyone using tuples for the
GPIO regulator states. Then again, it could be updated.

+CC Mark and Liam, let's see what their opinion on changing that is.

-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-20 23:18   ` Marek Vasut
@ 2018-11-21  8:39     ` Geert Uytterhoeven
  0 siblings, 0 replies; 18+ messages in thread
From: Geert Uytterhoeven @ 2018-11-21  8:39 UTC (permalink / raw)
  To: Marek Vasut
  Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Takeshi Kihara, Marek Vasut, Geert Uytterhoeven, Simon Horman,
	Wolfram Sang, Yoshihiro Shimoda, Linux-Renesas, Linux ARM,
	Mark Brown, Liam Girdwood

On Wed, Nov 21, 2018 at 12:33 AM Marek Vasut <marek.vasut@gmail.com> wrote:
> On 11/20/2018 11:16 AM, Geert Uytterhoeven wrote:
> > On Tue, Nov 6, 2018 at 9:46 PM Marek Vasut <marek.vasut@gmail.com> wrote:
> >> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> >>
> >> This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC
> >> and enables SD card slot connected to SDHI0, micro SD card slot
> >> connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board
> >> using the R8A77990 SoC.
> >>
> >> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> >> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> >
> >> --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
> >> +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
> >> @@ -129,6 +129,15 @@
> >>                 };
> >>         };
> >>
> >> +       reg_1p8v: regulator0 {
> >> +               compatible = "regulator-fixed";
> >> +               regulator-name = "fixed-1.8V";
> >> +               regulator-min-microvolt = <1800000>;
> >> +               regulator-max-microvolt = <1800000>;
> >> +               regulator-boot-on;
> >> +               regulator-always-on;
> >> +       };
> >> +
> >>         reg_3p3v: regulator1 {
> >>                 compatible = "regulator-fixed";
> >>                 regulator-name = "fixed-3.3V";
> >> @@ -180,6 +189,54 @@
> >>                 #clock-cells = <0>;
> >>                 clock-frequency = <74250000>;
> >>         };
> >> +
> >> +       vcc_sdhi0: regulator-vcc-sdhi0 {
> >> +               compatible = "regulator-fixed";
> >> +
> >> +               regulator-name = "SDHI0 Vcc";
> >> +               regulator-min-microvolt = <3300000>;
> >> +               regulator-max-microvolt = <3300000>;
> >> +
> >> +               gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
> >> +               enable-active-high;
> >> +       };
> >> +
> >> +       vccq_sdhi0: regulator-vccq-sdhi0 {
> >> +               compatible = "regulator-gpio";
> >> +
> >> +               regulator-name = "SDHI0 VccQ";
> >> +               regulator-min-microvolt = <1800000>;
> >> +               regulator-max-microvolt = <3300000>;
> >> +
> >> +               gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
> >> +               gpios-states = <1>;
> >> +               states = <3300000 1
> >> +                         1800000 0>;
> >
> > I know this is how it's done in the example in
> > Documentation/devicetree/bindings/regulator/gpio-regulator.txt,
> > but usually brackets are used to group tuples, like:
> >
> >     states = <3300000 1>, <1800000 0>;
> >
> > Perhaps the example should be changed?
>
> Well, looking through the DTS, I don't see anyone using tuples for the
> GPIO regulator states. Then again, it could be updated.

Probably a good idea given the current work on schema validation:

    DT YAML Encoding
    ...
    dts ‘< >’ are maintained
      ○ Will need to be stricter about these
      ○ Same for dtb, not for validation:
          ■ prop = <1 2 3 4>;
          ■ prop = <1>, <2>, <3>, <4>;

https://www.elinux.org/images/6/6b/LPC2018_json-schema_for_Devicetree.pdf

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2018-11-06 20:46 [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes Marek Vasut
                   ` (3 preceding siblings ...)
  2018-11-20 10:16 ` Geert Uytterhoeven
@ 2019-01-09 10:49 ` Simon Horman
  2019-01-09 10:57   ` Wolfram Sang
  4 siblings, 1 reply; 18+ messages in thread
From: Simon Horman @ 2019-01-09 10:49 UTC (permalink / raw)
  To: Marek Vasut
  Cc: devicetree, Takeshi Kihara, Marek Vasut, Geert Uytterhoeven,
	Wolfram Sang, Yoshihiro Shimoda, linux-renesas-soc,
	linux-arm-kernel

On Tue, Nov 06, 2018 at 09:46:47PM +0100, Marek Vasut wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> 
> This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC
> and enables SD card slot connected to SDHI0, micro SD card slot
> connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board
> using the R8A77990 SoC.
> 
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Simon Horman <horms+renesas@verge.net.au>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Cc: linux-renesas-soc@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> ---
> V2: - Deduplicated regular and UHS pins
>     - Added sdhi3_ds pin pinmux
> V3: - Squash two patches, one adding SDHI nodes to R8A77990 E3 DTSI
>       and another enabling them on E3 Ebisu, together.

Hi,

I am wondering if something special is required in order to use eMMC
connected to SDHI3. Using renesas-drivers-2019-01-08-v5.0-rc1 I do not see
that device initialised to the point where a corresponding block device is
present.

[    0.000127] NOTICE:  BL2: R-Car Gen3 Initial Program Loader(CA53)
Rev.1.0.21
[    0.005703] NOTICE:  BL2: PRR is R-Car E3 Ver.1.0
[    0.010361] NOTICE:  BL2: PLL1 nonSSCG Clock select
[    0.015356] NOTICE:  BL2: Board is Ebisu-4D Rev.1.0
[    0.020041] NOTICE:  BL2: Boot device is HyperFlash(80MHz)
[    0.025479] NOTICE:  BL2: LCM state is CM
[    0.029445] NOTICE:  BL2: 0x400000000 - 0x480000000, 2 GiB
[    0.034877] NOTICE:  BL2: DDR1856(rev.0.07)NOTICE:  ..0
[    0.040425] NOTICE:  BL2: DRAM Split is OFF
[    0.044304] NOTICE:  BL2: QoS is default setting(rev.0.02)
[    0.049748] NOTICE:  BL2: DRAM refresh interval 3.9 usec
[    0.055089] NOTICE:  BL2: v1.4(release):15dba6b-dirty
[    0.060029] NOTICE:  BL2: Built : 04:48:01, Jun 26 2018
[    0.065217] NOTICE:  BL2: Normal boot
[    0.068872] NOTICE:  BL2: dst=0xe6311d00 src=0x8180000 len=512(0x200)
[    0.075247] NOTICE:  BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800)
[    0.081874] NOTICE:  BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
[    0.089118] NOTICE:  BL2: dst=0x44100000 src=0x8200000 len=1048576(0x100000)
[    0.103992] NOTICE:  BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000)

# dmesg | egrep "(sd|mmc)"
[    2.872441] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
[    2.878587] renesas_sdhi_internal_dmac ee100000.sd: Got WP GPIO
[    2.885806] renesas_sdhi_internal_dmac ee120000.sd: Got CD GPIO
[    2.893284] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.2
[    2.901602] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.1
[    2.909708] renesas_sdhi_internal_dmac ee160000.sd: Failed getting OCR mask: 0
[    2.917236] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.1
[    2.925214] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.2
[    3.295711] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
[    3.301808] renesas_sdhi_internal_dmac ee100000.sd: Got WP GPIO
[    3.308042] renesas_sdhi_internal_dmac ee100000.sd: Linked as a consumer to regulator.4
[    3.316268] renesas_sdhi_internal_dmac ee100000.sd: Linked as a consumer to regulator.6
[    3.373714] renesas_sdhi_internal_dmac ee100000.sd: mmc0 base at 0xee100000 max clock rate 200 MHz
[    3.384547] renesas_sdhi_internal_dmac ee120000.sd: Got CD GPIO
[    3.390915] renesas_sdhi_internal_dmac ee120000.sd: Linked as a consumer to regulator.5
[    3.399171] renesas_sdhi_internal_dmac ee120000.sd: Linked as a consumer to regulator.7
[    3.456829] renesas_sdhi_internal_dmac ee120000.sd: mmc1 base at 0xee120000 max clock rate 200 MHz
[    3.468133] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.2
[    3.476448] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.1
[    3.484635] renesas_sdhi_internal_dmac ee160000.sd: Failed getting OCR mask: 0
[    3.492147] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.1
[    3.500110] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.2
[    3.562322] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.2
[    3.570834] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.1
[    3.579021] renesas_sdhi_internal_dmac ee160000.sd: Failed getting OCR mask: 0
[    3.586657] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.1
[    3.594653] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.2
[    3.640782] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.2
[    3.649110] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.1
[    3.657213] renesas_sdhi_internal_dmac ee160000.sd: Failed getting OCR mask: 0
[    3.664677] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.1
[    3.672599] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.2
[    3.688811] mmc0: new ultra high speed SDR104 SDXC card at address 0007
[    3.698572] mmcblk0: mmc0:0007 SL64G 58.3 GiB 
[    3.726399]  mmcblk0: p1
[    3.763694] mmc1: new ultra high speed SDR104 SDHC card at address 0001
[    3.772525] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.2
[    3.781623] mmcblk1: mmc1:0001 00000 29.8 GiB 
[    3.786779] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.1
[    3.795548] renesas_sdhi_internal_dmac ee160000.sd: Failed getting OCR mask: 0
[    3.803099] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.1
[    3.811006]  mmcblk1: p1
[    3.815437] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.2
[    3.856991] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.2
[    3.865263] renesas_sdhi_internal_dmac ee160000.sd: Linked as a consumer to regulator.1
[    3.873371] renesas_sdhi_internal_dmac ee160000.sd: Failed getting OCR mask: 0
[    3.880864] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.1
[    3.888786] renesas_sdhi_internal_dmac ee160000.sd: Dropping the link to regulator.2

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2019-01-09 10:49 ` Simon Horman
@ 2019-01-09 10:57   ` Wolfram Sang
  2019-01-09 12:02     ` Marek Vasut
  0 siblings, 1 reply; 18+ messages in thread
From: Wolfram Sang @ 2019-01-09 10:57 UTC (permalink / raw)
  To: Simon Horman
  Cc: Marek Vasut, devicetree, Takeshi Kihara, Marek Vasut,
	Geert Uytterhoeven, Yoshihiro Shimoda, linux-renesas-soc,
	linux-arm-kernel

[-- Attachment #1: Type: text/plain, Size: 314 bytes --]

> [    3.373714] renesas_sdhi_internal_dmac ee100000.sd: mmc0 base at 0xee100000 max clock rate 200 MHz
> [    3.456829] renesas_sdhi_internal_dmac ee120000.sd: mmc1 base at 0xee120000 max clock rate 200 MHz

No mmc2 initialized. That should work regardless of eMMC. Probably
something wrong in the DT somewhere.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2019-01-09 10:57   ` Wolfram Sang
@ 2019-01-09 12:02     ` Marek Vasut
  2019-01-09 12:32       ` Simon Horman
  0 siblings, 1 reply; 18+ messages in thread
From: Marek Vasut @ 2019-01-09 12:02 UTC (permalink / raw)
  To: Wolfram Sang, Simon Horman
  Cc: devicetree, Takeshi Kihara, Marek Vasut, Geert Uytterhoeven,
	Yoshihiro Shimoda, linux-renesas-soc, linux-arm-kernel

On 1/9/19 11:57 AM, Wolfram Sang wrote:
>> [    3.373714] renesas_sdhi_internal_dmac ee100000.sd: mmc0 base at 0xee100000 max clock rate 200 MHz
>> [    3.456829] renesas_sdhi_internal_dmac ee120000.sd: mmc1 base at 0xee120000 max clock rate 200 MHz
> 
> No mmc2 initialized. That should work regardless of eMMC. Probably
> something wrong in the DT somewhere.

Weird, it worked in next-20181102 with these patches, I just rechecked:

7818a9f06df1 mmc: renesas_sdhi: Whitelist R8A77990 SDHI
a05a906776f8 pinctrl: sh-pfc: r8a77990: Add voltage switch operations
for SDHI
2cc9d3a293e9 pinctrl: sh-pfc: r8a77990: Add SDHI pins, groups and functions
6b8d151613b7 pinctrl: sh-pfc: r8a77990: Add Audio SSI pins, groups and
functions
9167b22938f7 pinctrl: sh-pfc: r8a77990: Add Audio clock pins, groups and
functions
000cc50fc942 arm64: dts: r8a77990-ebisu: Enable HS200 of SDHI3
d3f59bbbf7ce arm64: dts: r8a77990-ebisu: Enable eMMC of SDHI3
5928c59bff8d arm64: dts: r8a77990-ebisu: Enable UHS-I of SDHI0 and SDHI1
dae32a3172b8 arm64: dts: r8a77990-ebisu: Enable SD card of SDHI0 and SDHI1
8feef039c6c6 arm64: dts: r8a77990: Add SDHI device nodes
25e9471b6a27 (tag: next-20181102) Add linux-next specific files for 20181102

I'll let you know once I figure it out.

-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2019-01-09 12:02     ` Marek Vasut
@ 2019-01-09 12:32       ` Simon Horman
  2019-01-09 12:49         ` Marek Vasut
  0 siblings, 1 reply; 18+ messages in thread
From: Simon Horman @ 2019-01-09 12:32 UTC (permalink / raw)
  To: Marek Vasut
  Cc: Wolfram Sang, devicetree, Takeshi Kihara, Marek Vasut,
	Geert Uytterhoeven, Yoshihiro Shimoda, linux-renesas-soc,
	linux-arm-kernel

On Wed, Jan 09, 2019 at 01:02:00PM +0100, Marek Vasut wrote:
> On 1/9/19 11:57 AM, Wolfram Sang wrote:
> >> [    3.373714] renesas_sdhi_internal_dmac ee100000.sd: mmc0 base at 0xee100000 max clock rate 200 MHz
> >> [    3.456829] renesas_sdhi_internal_dmac ee120000.sd: mmc1 base at 0xee120000 max clock rate 200 MHz
> > 
> > No mmc2 initialized. That should work regardless of eMMC. Probably
> > something wrong in the DT somewhere.
> 
> Weird, it worked in next-20181102 with these patches, I just rechecked:
> 
> 7818a9f06df1 mmc: renesas_sdhi: Whitelist R8A77990 SDHI
> a05a906776f8 pinctrl: sh-pfc: r8a77990: Add voltage switch operations
> for SDHI
> 2cc9d3a293e9 pinctrl: sh-pfc: r8a77990: Add SDHI pins, groups and functions
> 6b8d151613b7 pinctrl: sh-pfc: r8a77990: Add Audio SSI pins, groups and
> functions
> 9167b22938f7 pinctrl: sh-pfc: r8a77990: Add Audio clock pins, groups and
> functions
> 000cc50fc942 arm64: dts: r8a77990-ebisu: Enable HS200 of SDHI3
> d3f59bbbf7ce arm64: dts: r8a77990-ebisu: Enable eMMC of SDHI3
> 5928c59bff8d arm64: dts: r8a77990-ebisu: Enable UHS-I of SDHI0 and SDHI1
> dae32a3172b8 arm64: dts: r8a77990-ebisu: Enable SD card of SDHI0 and SDHI1
> 8feef039c6c6 arm64: dts: r8a77990: Add SDHI device nodes
> 25e9471b6a27 (tag: next-20181102) Add linux-next specific files for 20181102
> 
> I'll let you know once I figure it out.

Could it be related to potentially old U-Boot etc.. on the board I am using?

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
  2019-01-09 12:32       ` Simon Horman
@ 2019-01-09 12:49         ` Marek Vasut
  0 siblings, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2019-01-09 12:49 UTC (permalink / raw)
  To: Simon Horman
  Cc: Wolfram Sang, devicetree, Takeshi Kihara, Marek Vasut,
	Geert Uytterhoeven, Yoshihiro Shimoda, linux-renesas-soc,
	linux-arm-kernel

On 1/9/19 1:32 PM, Simon Horman wrote:
> On Wed, Jan 09, 2019 at 01:02:00PM +0100, Marek Vasut wrote:
>> On 1/9/19 11:57 AM, Wolfram Sang wrote:
>>>> [    3.373714] renesas_sdhi_internal_dmac ee100000.sd: mmc0 base at 0xee100000 max clock rate 200 MHz
>>>> [    3.456829] renesas_sdhi_internal_dmac ee120000.sd: mmc1 base at 0xee120000 max clock rate 200 MHz
>>>
>>> No mmc2 initialized. That should work regardless of eMMC. Probably
>>> something wrong in the DT somewhere.
>>
>> Weird, it worked in next-20181102 with these patches, I just rechecked:
>>
>> 7818a9f06df1 mmc: renesas_sdhi: Whitelist R8A77990 SDHI
>> a05a906776f8 pinctrl: sh-pfc: r8a77990: Add voltage switch operations
>> for SDHI
>> 2cc9d3a293e9 pinctrl: sh-pfc: r8a77990: Add SDHI pins, groups and functions
>> 6b8d151613b7 pinctrl: sh-pfc: r8a77990: Add Audio SSI pins, groups and
>> functions
>> 9167b22938f7 pinctrl: sh-pfc: r8a77990: Add Audio clock pins, groups and
>> functions
>> 000cc50fc942 arm64: dts: r8a77990-ebisu: Enable HS200 of SDHI3
>> d3f59bbbf7ce arm64: dts: r8a77990-ebisu: Enable eMMC of SDHI3
>> 5928c59bff8d arm64: dts: r8a77990-ebisu: Enable UHS-I of SDHI0 and SDHI1
>> dae32a3172b8 arm64: dts: r8a77990-ebisu: Enable SD card of SDHI0 and SDHI1
>> 8feef039c6c6 arm64: dts: r8a77990: Add SDHI device nodes
>> 25e9471b6a27 (tag: next-20181102) Add linux-next specific files for 20181102
>>
>> I'll let you know once I figure it out.
> 
> Could it be related to potentially old U-Boot etc.. on the board I am using?

No, I don't think so (however, you should only use latest greatest of
course :-) ).

I see this on next/master, but not on next/20181224 right now, so I'm
bisecting it down.

-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2019-01-09 12:49 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-06 20:46 [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes Marek Vasut
2018-11-07  8:50 ` Wolfram Sang
2018-11-07 10:59   ` Marek Vasut
2018-11-07 13:08     ` Wolfram Sang
2018-11-07 13:19       ` Marek Vasut
2018-11-07 19:23         ` Wolfram Sang
2018-11-07 20:35           ` Marek Vasut
2018-11-07 11:19 ` Simon Horman
2018-11-08 12:00 ` Geert Uytterhoeven
2018-11-08 13:06   ` Simon Horman
2018-11-20 10:16 ` Geert Uytterhoeven
2018-11-20 23:18   ` Marek Vasut
2018-11-21  8:39     ` Geert Uytterhoeven
2019-01-09 10:49 ` Simon Horman
2019-01-09 10:57   ` Wolfram Sang
2019-01-09 12:02     ` Marek Vasut
2019-01-09 12:32       ` Simon Horman
2019-01-09 12:49         ` Marek Vasut

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).