From: Kieran Bingham <kieran.bingham@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>,
laurent.pinchart@ideasonboard.com,
niklas.soderlund+renesas@ragnatech.se
Cc: linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v2 4/6] media: adv748x: Store the source subdevice in TX
Date: Mon, 7 Jan 2019 10:41:18 +0000 [thread overview]
Message-ID: <abfc5e00-2e22-5b97-6a07-624feaaf06d9@ideasonboard.com> (raw)
In-Reply-To: <20190106155413.30666-5-jacopo+renesas@jmondi.org>
Hi Jacopo,
On 06/01/2019 15:54, Jacopo Mondi wrote:
> The power_up_tx() procedure needs to set a few registers conditionally to
> the selected video source, but it currently checks for the provided tx to
> be either TXA or TXB.
>
> With the introduction of dynamic routing between HDMI and AFE entities to
> TXA, checking which TX the function is operating on is not meaningful anymore.
>
> To fix this, store the subdevice of the source providing video data to the
> CSI-2 TX in the 'struct adv748x_csi2' representing the TX and check on it.
>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> drivers/media/i2c/adv748x/adv748x-core.c | 2 +-
> drivers/media/i2c/adv748x/adv748x-csi2.c | 13 ++++++++++---
> drivers/media/i2c/adv748x/adv748x.h | 1 +
> 3 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index ad4e6424753a..200e00f93546 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -254,7 +254,7 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
> adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
>
> /* ADI Required Write */
> - if (is_txa(tx)) {
> + if (tx->src == &state->hdmi.sd) {
> adv748x_write_check(state, page, 0xdb, 0x10, &ret);
> adv748x_write_check(state, page, 0xd6, 0x07, &ret);
> } else {
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 9d391d6f752e..de3944615e64 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -46,9 +46,16 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
> return ret;
> }
>
> - return media_create_pad_link(&src->entity, src_pad,
> - &tx->sd.entity, ADV748X_CSI2_SINK,
> - enable ? MEDIA_LNK_FL_ENABLED : 0);
> + ret = media_create_pad_link(&src->entity, src_pad,
> + &tx->sd.entity, ADV748X_CSI2_SINK,
> + enable ? MEDIA_LNK_FL_ENABLED : 0);
> + if (ret)
> + return ret;
> +
> + if (enable)
> + tx->src = src;
> +
> + return 0;
> }
>
> /* -----------------------------------------------------------------------------
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index bc2da1b5ce29..d8d94053301b 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -84,6 +84,7 @@ struct adv748x_csi2 {
> struct media_pad pads[ADV748X_CSI2_NR_PADS];
> struct v4l2_ctrl_handler ctrl_hdl;
> struct v4l2_ctrl *pixel_rate;
> + struct v4l2_subdev *src;
> struct v4l2_subdev sd;
> };
>
>
--
Regards
--
Kieran
next prev parent reply other threads:[~2019-01-07 10:41 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-06 15:54 [PATCH v2 0/6] media: adv748x: Implement dynamic routing support Jacopo Mondi
2019-01-06 15:54 ` [PATCH v2 1/6] media: adv748x: Add is_txb() Jacopo Mondi
2019-01-07 9:49 ` Kieran Bingham
2019-01-07 10:05 ` Jacopo Mondi
2019-01-07 10:38 ` Kieran Bingham
2019-01-09 0:04 ` Laurent Pinchart
2019-01-06 15:54 ` [PATCH v2 2/6] media: adv748x: Rename reset procedures Jacopo Mondi
2019-01-07 9:59 ` Kieran Bingham
2019-01-06 15:54 ` [PATCH v2 3/6] media: adv748x: csi2: Link AFE with TXA and TXB Jacopo Mondi
2019-01-07 10:35 ` Kieran Bingham
2019-01-09 0:11 ` Laurent Pinchart
2019-01-06 15:54 ` [PATCH v2 4/6] media: adv748x: Store the source subdevice in TX Jacopo Mondi
2019-01-07 10:41 ` Kieran Bingham [this message]
2019-01-06 15:54 ` [PATCH v2 5/6] media: adv748x: Store the TX sink in HDMI/AFE Jacopo Mondi
2019-01-07 10:45 ` Kieran Bingham
2019-01-06 15:54 ` [PATCH v2 6/6] media: adv748x: Implement TX link_setup callback Jacopo Mondi
2019-01-07 12:36 ` Kieran Bingham
2019-01-09 0:15 ` Laurent Pinchart
2019-01-09 14:15 ` Kieran Bingham
2019-01-10 8:58 ` Jacopo Mondi
2019-01-10 10:05 ` Kieran Bingham
2019-01-10 8:51 ` Jacopo Mondi
2019-01-10 9:27 ` Laurent Pinchart
2019-01-09 14:17 ` Kieran Bingham
2019-01-10 10:01 ` Jacopo Mondi
2019-01-10 13:40 ` Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=abfc5e00-2e22-5b97-6a07-624feaaf06d9@ideasonboard.com \
--to=kieran.bingham@ideasonboard.com \
--cc=jacopo+renesas@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).