linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Simon Horman <horms+renesas@verge.net.au>
To: linux-renesas-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	Magnus Damm <magnus.damm@gmail.com>,
	Chris Brandt <chris.brandt@renesas.com>,
	Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH 09/12] ARM: dts: r7s9210: Initial SoC device tree
Date: Fri,  8 Feb 2019 12:14:10 +0100	[thread overview]
Message-ID: <bbbcd02b825529076951a37ee632cdb33df414c7.1549623128.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1549623128.git.horms+renesas@verge.net.au>

From: Chris Brandt <chris.brandt@renesas.com>

Basic support for the RZ/A2 (R7S9210) SoC.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s9210.dtsi | 218 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 218 insertions(+)
 create mode 100644 arch/arm/boot/dts/r7s9210.dtsi

diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
new file mode 100644
index 000000000000..22baa96f5974
--- /dev/null
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R7S9210 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corporation
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r7s9210-cpg-mssr.h>
+
+/ {
+	compatible = "renesas,r7s9210";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* External clocks */
+	extal_clk: extal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* Value must be set by board */
+		clock-frequency = <0>;
+	};
+
+	rtc_x1_clk: rtc_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value (32678) must be set by board */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <528000000>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		L2: cache-controller@1f003000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1f003000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			arm,early-bresp-disable;
+			arm,full-line-zero-disable;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		scif0: serial@e8007000 {
+			compatible = "renesas,scif-r7s9210";
+			reg = <0xe8007000 0x18>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD 47>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif1: serial@e8007800 {
+			compatible = "renesas,scif-r7s9210";
+			reg = <0xe8007800 0x18>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD 46>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif2: serial@e8008000 {
+			compatible = "renesas,scif-r7s9210";
+			reg = <0xe8008000 0x18>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD 45>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif3: serial@e8008800 {
+			compatible = "renesas,scif-r7s9210";
+			reg = <0xe8008800 0x18>;
+			interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD 44>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif4: serial@e8009000 {
+			compatible = "renesas,scif-r7s9210";
+			reg = <0xe8009000 0x18>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD 43>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm0: timer@e803b000 {
+			compatible = "renesas,r7s9210-ostm", "renesas,ostm";
+			reg = <0xe803b000 0x30>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 36>;
+			clock-names = "ostm0";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@e803c000 {
+			compatible = "renesas,r7s9210-ostm", "renesas,ostm";
+			reg = <0xe803c000 0x30>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 35>;
+			clock-names = "ostm1";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@e803d000 {
+			compatible = "renesas,r7s9210-ostm", "renesas,ostm";
+			reg = <0xe803d000 0x30>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 34>;
+			clock-names = "ostm2";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8221000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xe8221000 0x1000>,
+			      <0xe8222000 0x1000>;
+		};
+
+		cpg: clock-controller@fcfe0010 {
+			compatible = "renesas,r7s9210-cpg-mssr";
+			reg = <0xfcfe0010 0x455>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		wdt: watchdog@fcfe7000 {
+			compatible = "renesas,r7s9210-wdt", "renesas,rza-wdt";
+			reg = <0xfcfe7000 0x26>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R7S9210_CLK_P0>;
+		};
+
+		bsid: chipid@fcfe8004 {
+			compatible = "renesas,bsid";
+			reg = <0xfcfe8004 4>;
+		};
+
+		pinctrl: pin-controller@fcffe000 {
+			compatible = "renesas,r7s9210-pinctrl";
+			reg = <0xfcffe000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 176>;
+		};
+	};
+};
-- 
2.11.0


  parent reply	other threads:[~2019-02-08 11:14 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-08 11:14 [GIT PULL] Renesas ARM Based SoC DT Updates for v5.1 Simon Horman
2019-02-08 11:14 ` [PATCH 01/12] ARM: dts: stout: Convert to new LVDS DT bindings Simon Horman
2019-02-08 11:14 ` [PATCH 02/12] ARM: dts: iwg23s-sbc: Enable RTC Simon Horman
2019-02-08 11:14 ` [PATCH 03/12] ARM: dts: r8a7744: Fix sorting of vsp and msiof nodes Simon Horman
2019-02-08 11:14 ` [PATCH 04/12] ARM: dts: r8a7743: Remove generic compatible string from iic3 Simon Horman
2019-02-08 11:14 ` [PATCH 05/12] ARM: dts: r8a7743: Remove aliases from SoC dtsi Simon Horman
2019-02-08 11:14 ` [PATCH 06/12] ARM: dts: r8a7743: Fix sorting of rwdt node Simon Horman
2019-02-08 11:14 ` [PATCH 07/12] ARM: dts: r8a7778: Add HSCIF0/1 support Simon Horman
2019-02-08 11:14 ` [PATCH 08/12] ARM: dts: r8a7779: Add HSCIF0/1 device nodes Simon Horman
2019-02-08 11:14 ` Simon Horman [this message]
2019-02-08 11:14 ` [PATCH 10/12] ARM: dts: r7s9210-rza2mevb: Add support for RZ/A2M EVB Simon Horman
2019-02-08 11:14 ` [PATCH 11/12] ARM: dts: r8a7744: Add DU support Simon Horman
2019-02-08 11:14 ` [PATCH 12/12] ARM: dts: r8a7744: Add LVDS support Simon Horman
2019-02-15 14:49 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v5.1 Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bbbcd02b825529076951a37ee632cdb33df414c7.1549623128.git.horms+renesas@verge.net.au \
    --to=horms+renesas@verge.net.au \
    --cc=chris.brandt@renesas.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).