[PATCH v2 00/10] arm64: renesas: Add support for R Car H3e 2G-and M3e-2G

[PATCH v2 00/10] arm64: renesas: Add support for R Car H3e 2G-and M3e-2G

[Geert Uytterhoeven]

	Hi all,

The new R-Car Gen3e SoCs are different gradings of the existing R-Car
Gen3 SoCs.  This series adds support for the first two members of the
family: R-Car H3e-2G (R8A779M1) and R-Car M3e-2G (R8A779M3), on the
Salvator-XS and ULCB (with and without Kingfisher) development boards.

Changes compared to v1[1]:
  - Add Reviewed-by, Acked-by.
  - Drop new fam_rcar_gen3e and soc_rcar_[hm]3e, just use the existing
    soc_rcar_{h3,m3_w},
  - Drop pinctrl fix, which has evolved independently[2],
  - Drop mmc fix, which has been superseded by a recent refactoring[3],
  - Drop 2 GHz turbo modes, as the official opp-microvolt values are not
    yet available,
  - Widen the audience.

This series has been tested on Salvator-X with R-Car H3 ES3.0 and
Salvator-XS with R-Car M3-W+.  For testing, a branch with dependencies
and fixups to prototype R-Car Gen3e development on older Gen3 SoCs can
be found at[4].

I plan to queue this in renesas-devel for v5.15.

Thanks for your comments!

[1] "[PATCH 00/14] arm64: renesas: Add support for R-Car H3e 2G-and M3e-2G"
    (https://lore.kernel.org/r/cover.1623315732.git.geert+renesas@glider.be/).
[2] "[PATCH v2] pinctrl: renesas: Fix pin control matching on R-Car H3e-2G"
    (https://lore.kernel.org/r/6cdc5bfa424461105779b56f455387e03560cf66.1626707688.git.geert+renesas@glider.be)
[3] "[PATCH v3] mmc: host: renesas_sdhi: Refactor renesas_sdhi_probe()"
    (https://lore.kernel.org/r/20210702112956.1065875-1-yoshihiro.shimoda.uh@renesas.com/)
[2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/rcar-gen3e-v2

Geert Uytterhoeven (10):
  dt-bindings: arm: renesas: Document R-Car H3e-2G and M3e-2G SoCs and
    boards
  soc: renesas: Identify R-Car H3e-2G and M3e-2G
  arm64: dts: renesas: Add Renesas R8A779M1 SoC support
  arm64: dts: renesas: Add Renesas R8A779M3 SoC support
  arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G
  arm64: dts: renesas: Add support for H3ULCB with R-Car H3e-2G
  arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car
    H3e-2G
  arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G
  arm64: dts: renesas: Add support for M3ULCB with R-Car M3e-2G
  arm64: dts: renesas: Add support for M3ULCB+Kingfisher with R-Car
    M3e-2G

 .../devicetree/bindings/arm/renesas.yaml      | 50 +++++++++++++----
 arch/arm64/boot/dts/renesas/Makefile          |  8 +++
 .../boot/dts/renesas/r8a779m1-salvator-xs.dts | 53 ++++++++++++++++++
 .../boot/dts/renesas/r8a779m1-ulcb-kf.dts     | 19 +++++++
 arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts | 54 +++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a779m1.dtsi     | 12 +++++
 .../boot/dts/renesas/r8a779m3-salvator-xs.dts | 46 ++++++++++++++++
 .../boot/dts/renesas/r8a779m3-ulcb-kf.dts     | 18 +++++++
 arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts | 45 ++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a779m3.dtsi     | 12 +++++
 drivers/soc/renesas/Kconfig                   |  2 +
 drivers/soc/renesas/renesas-soc.c             |  4 ++
 12 files changed, 312 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3.dtsi

-- 
2.25.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

[PATCH v2 01/10] dt-bindings: arm: renesas: Document R-Car H3e-2G and M3e-2G SoCs and boards

[Geert Uytterhoeven]

Document the compatible values for the R-Car H3e-2G (R8A779M1) and
M3e-2G (R8A779M3) SoCs.  These are different gradings of the R-Car H3
ES3.0 (R8A77951) and M3-W+ (R8A77961) SoCs.

All R-Car Gen3e on-SoC devices are identical to the devices on the
corresponding R-Car Gen3 SoCs, and thus just use the compatible values
for the latter.  The root compatible properties do gain an additional
value, to sort out integration issues if they ever arise.

Document the use of these SoCs on the Salvator-XS and ULCB (with and
without Kingfisher) development boards.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
---
v2:
  - Add Reviewed-by, Acked-by.
---
 .../devicetree/bindings/arm/renesas.yaml      | 50 +++++++++++++++----
 1 file changed, 39 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index a0cce4e250398b1d..8a11918866b86482 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -238,17 +238,29 @@ properties:
           - const: renesas,r8a77961
 
       - description: Kingfisher (SBEV-RCAR-KF-M03)
-        items:
-          - const: shimafuji,kingfisher
-          - enum:
-              - renesas,h3ulcb
-              - renesas,m3ulcb
-              - renesas,m3nulcb
-          - enum:
-              - renesas,r8a7795
-              - renesas,r8a7796
-              - renesas,r8a77961
-              - renesas,r8a77965
+        oneOf:
+          - items:
+              - const: shimafuji,kingfisher
+              - enum:
+                  - renesas,h3ulcb
+                  - renesas,m3ulcb
+                  - renesas,m3nulcb
+              - enum:
+                  - renesas,r8a7795
+                  - renesas,r8a7796
+                  - renesas,r8a77961
+                  - renesas,r8a77965
+          - items:
+              - const: shimafuji,kingfisher
+              - enum:
+                  - renesas,h3ulcb
+                  - renesas,m3ulcb
+              - enum:
+                  - renesas,r8a779m1
+                  - renesas,r8a779m3
+              - enum:
+                  - renesas,r8a7795
+                  - renesas,r8a77961
 
       - description: R-Car M3-N (R8A77965)
         items:
@@ -296,6 +308,22 @@ properties:
           - const: renesas,falcon-cpu
           - const: renesas,r8a779a0
 
+      - description: R-Car H3e-2G (R8A779M1)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m1
+          - const: renesas,r8a7795
+
+      - description: R-Car M3e-2G (R8A779M3)
+        items:
+          - enum:
+              - renesas,m3ulcb      # M3ULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m3
+          - const: renesas,r8a77961
+
       - description: RZ/N1D (R9A06G032)
         items:
           - enum:
-- 
2.25.1

[PATCH v2 02/10] soc: renesas: Identify R-Car H3e-2G and M3e-2G

[Geert Uytterhoeven]

Add support for identifying the R-Car H3e-2G (R8A779M1) and R-Car M3e-2G
(R8A779M3) SoCs.

As these are different gradings of the already supported R-Car H3 ES3.0
(R8A77951) and M3-W+ (R8A77961) SoCs, support for them is enabled
through the existing ARCH_R8A77951 and ARCH_R8A77961 configuration
symbols.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Drop new fam_rcar_gen3e and soc_rcar_[hm]3e, just use the existing
    soc_rcar_{h3,m3_w},
  - Add Reviewed-by.
---
 drivers/soc/renesas/Kconfig       | 2 ++
 drivers/soc/renesas/renesas-soc.c | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 71b44c31b012dd24..07e0ecd64319da63 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -208,6 +208,7 @@ config ARCH_R8A77951
 	help
 	  This enables support for the Renesas R-Car H3 SoC (revisions 2.0 and
 	  later).
+	  This includes different gradings like R-Car H3e-2G.
 
 config ARCH_R8A77965
 	bool "ARM64 Platform support for R-Car M3-N"
@@ -229,6 +230,7 @@ config ARCH_R8A77961
 	select SYSC_R8A77961
 	help
 	  This enables support for the Renesas R-Car M3-W+ SoC.
+	  This includes different gradings like R-Car M3e-2G.
 
 config ARCH_R8A77980
 	bool "ARM64 Platform support for R-Car V3H"
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 8310fce7714e9d21..dab9f5a0aad00233 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -284,11 +284,15 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #if defined(CONFIG_ARCH_R8A77950) || defined(CONFIG_ARCH_R8A77951)
 	{ .compatible = "renesas,r8a7795",	.data = &soc_rcar_h3 },
 #endif
+#ifdef CONFIG_ARCH_R8A77951
+	{ .compatible = "renesas,r8a779m1",	.data = &soc_rcar_h3 },
+#endif
 #ifdef CONFIG_ARCH_R8A77960
 	{ .compatible = "renesas,r8a7796",	.data = &soc_rcar_m3_w },
 #endif
 #ifdef CONFIG_ARCH_R8A77961
 	{ .compatible = "renesas,r8a77961",	.data = &soc_rcar_m3_w },
+	{ .compatible = "renesas,r8a779m3",	.data = &soc_rcar_m3_w },
 #endif
 #ifdef CONFIG_ARCH_R8A77965
 	{ .compatible = "renesas,r8a77965",	.data = &soc_rcar_m3_n },
-- 
2.25.1

[PATCH v2 03/10] arm64: dts: renesas: Add Renesas R8A779M1 SoC support

[Geert Uytterhoeven]

Add support for the Renesas R-Car H3e-2G (R8A779M1) SoC, which is a
different grading of the R-Car H3 ES3.0 (R8A77951) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/r8a779m1.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi
new file mode 100644
index 0000000000000000..0e9b04469b83c661
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car H3e-2G (R8A779M1) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m1", "renesas,r8a7795";
+};
-- 
2.25.1

[PATCH v2 04/10] arm64: dts: renesas: Add Renesas R8A779M3 SoC support

[Geert Uytterhoeven]

Add support for the Renesas R-Car M3e-2G (R8A779M3) SoC, which is a
different grading of the R-Car M3-W+ (R8A77961) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/r8a779m3.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi
new file mode 100644
index 0000000000000000..65bb6188ccf5470a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car M3e-2G (R8A779M3) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77961.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m3", "renesas,r8a77961";
+};
-- 
2.25.1

[PATCH v2 05/10] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G

[Geert Uytterhoeven]

Add support for the Renesas Salvator-X 2nd version development
board equipped with an R-Car H3e-2G SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 +
 .../boot/dts/renesas/r8a779m1-salvator-xs.dts | 53 +++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 68e30e26564b1276..741801e0ec28da63 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -63,4 +63,6 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
 
 dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
+
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts
new file mode 100644
index 0000000000000000..084b75b046802339
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-salvator-xs.dts
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m1.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m1";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m1",
+		     "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&x22_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
-- 
2.25.1

[PATCH v2 06/10] arm64: dts: renesas: Add support for H3ULCB with R-Car H3e-2G

[Geert Uytterhoeven]

Add support for the Renesas R-Car Starter Kit Premier equipped with an
R-Car H3e-2G SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts | 54 +++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 741801e0ec28da63..fcf26e75880a0864 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -64,5 +64,6 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
 dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts
new file mode 100644
index 0000000000000000..e294b6bda28c68c8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb.dts
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a779m1.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas H3ULCB board based on r8a779m1";
+	compatible = "renesas,h3ulcb", "renesas,r8a779m1", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 4>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
-- 
2.25.1

[PATCH v2 07/10] arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3e-2G

[Geert Uytterhoeven]

Add support for the Renesas R-Car Starter Kit Premier and Kingfisher
combo equipped with an R-Car H3e-2G SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 .../boot/dts/renesas/r8a779m1-ulcb-kf.dts     | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index fcf26e75880a0864..64936d02a3e2e90f 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -65,5 +65,6 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts
new file mode 100644
index 0000000000000000..0baebc5c58b06a34
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb-kf.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a779m1-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas H3ULCB Kingfisher board based on r8a779m1";
+	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
+		     "renesas,r8a779m1", "renesas,r8a7795";
+};
-- 
2.25.1

[PATCH v2 08/10] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G

[Geert Uytterhoeven]

Add support for the Renesas Salvator-X 2nd version development
board equipped with an R-Car M3e-2G SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 +
 .../boot/dts/renesas/r8a779m3-salvator-xs.dts | 46 +++++++++++++++++++
 2 files changed, 48 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 64936d02a3e2e90f..169c4f37c663a54e 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -67,4 +67,6 @@ dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
 
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
+
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
new file mode 100644
index 0000000000000000..4ab26fd7233d62fc
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-salvator-xs.dts
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m3.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m3";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m3",
+		     "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
-- 
2.25.1

[PATCH v2 09/10] arm64: dts: renesas: Add support for M3ULCB with R-Car M3e-2G

[Geert Uytterhoeven]

Add support for the Renesas R-Car Starter Kit Pro equipped with an R-Car
M3e-2G SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts | 45 +++++++++++++++++++
 2 files changed, 46 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 169c4f37c663a54e..8a2bec836d305064 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -68,5 +68,6 @@ dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts
new file mode 100644
index 0000000000000000..8f215a0b771b7c30
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-ulcb.dts
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m3.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a779m3";
+	compatible = "renesas,m3ulcb", "renesas,r8a779m3", "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
-- 
2.25.1

[PATCH v2 10/10] arm64: dts: renesas: Add support for M3ULCB+Kingfisher with R-Car M3e-2G

[Geert Uytterhoeven]

Add support for the Renesas R-Car Starter Kit Pro and Kingfisher combo
equipped with an R-Car M3e-2G SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile           |  1 +
 .../boot/dts/renesas/r8a779m3-ulcb-kf.dts      | 18 ++++++++++++++++++
 2 files changed, 19 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 8a2bec836d305064..15a53b5139669aa6 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -69,5 +69,6 @@ dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts
new file mode 100644
index 0000000000000000..6bacee1d2ef5c857
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-ulcb-kf.dts
+ * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com>
+ */
+
+#include "r8a779m3-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3ULCB Kingfisher board based on r8a779m3";
+	compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
+		     "renesas,r8a779m3", "renesas,r8a77961";
+};
-- 
2.25.1