[PATCH 01/44] arm64: dts: renesas: r8a77990: ebisu: Add backlight

[PATCH 01/44] arm64: dts: renesas: r8a77990: ebisu: Add backlight

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Add the backlight device for the LVDS1 output, in preparation for panel
support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 62bdddcbbae7..24beb0e22cb0 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -39,6 +39,16 @@
 		clock-frequency = <11289600>;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 50000>;
+
+		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+		default-brightness-level = <10>;
+
+		power-supply = <&reg_12p0v>;
+	};
+
 	cvbs-in {
 		compatible = "composite-video-connector";
 		label = "CVBS IN";
@@ -184,6 +194,15 @@
 		clock-frequency = <24576000>;
 	};
 
+	reg_12p0v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	x13_clk: x13 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-- 
2.11.0

[PATCH 02/44] arm64: dts: renesas: r8a77995: draak: Set better backlight levels

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The backlight levels provided in the Draak DT produce a perceived
brightness very biased towards high brightness. Use better brightness
levels based on the CIE 1931 formula.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 89df9bc844c0..db2bed1751b8 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -28,8 +28,8 @@
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 50000>;
 
-		brightness-levels = <256 128 64 16 8 4 0>;
-		default-brightness-level = <6>;
+		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+		default-brightness-level = <10>;
 
 		power-supply = <&reg_12p0v>;
 		enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-- 
2.11.0

[PATCH 03/44] arm64: dts: renesas: r8a77990: ebisu: Fix EthernetAVB phy mode to rgmii

[Simon Horman]

From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>

According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of
August 24, 2018, the TX clock internal delay mode doesn't support
on R-Car E3. This patch fixes EthernetAVB phy mode to rgmii.

This is achieved by simply dropping the phy-mode property from
r8a77990-ebisu.dts as the default property for this for r8a77990,
as set in r8a77990.dtsi, is "rgmii".

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
---
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 24beb0e22cb0..8b66ee86e7bb 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -267,7 +267,6 @@
 	pinctrl-names = "default";
 	renesas,no-ether-link;
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii-txid";
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
-- 
2.11.0

[PATCH 04/44] arm64: dts: renesas: Initial device tree for r8a774c0

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Basic support for the RZ/G2E SoC (a.k.a. r8a774c0).

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 186 ++++++++++++++++++++++++++++++
 1 file changed, 186 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
new file mode 100644
index 000000000000..f425d0b3a31b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2E (R8A774C0) SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a774c0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a774c0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 1 core only at this point */
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774C0_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774C0_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774c0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774c0-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774c0-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
-- 
2.11.0

[PATCH 05/44] arm64: dts: renesas: r8a774c0: Add SYS-DMAC controller nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add sys-dmac[012] device nodes for the RZ/G2E SoC (a.k.a. r8a774c0).

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 102 ++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index f425d0b3a31b..7b3d247ca004 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -126,6 +126,108 @@
 			#power-domain-cells = <1>;
 		};
 
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
 		scif2: serial@e6e88000 {
 			compatible = "renesas,scif-r8a774c0",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
-- 
2.11.0

[PATCH 06/44] arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add the device nodes for all RZ/G2E SCIF and HSCIF serial ports,
including clocks, power domains and DMAs.
According to the HW user manual, SCIF[015] and HSCIF[012] are
connected to both SYS-DMAC1 and SYS-DMAC2, while SCIF[34] and
HSCIF[34] are connected to SYS-DMAC0.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 171 ++++++++++++++++++++++++++++++
 1 file changed, 171 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 7b3d247ca004..872efa755532 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -126,6 +126,94 @@
 			#power-domain-cells = <1>;
 		};
 
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
@@ -228,6 +316,40 @@
 			dma-channels = <16>;
 		};
 
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
 		scif2: serial@e6e88000 {
 			compatible = "renesas,scif-r8a774c0",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
@@ -242,6 +364,55 @@
 			status = "disabled";
 		};
 
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
-- 
2.11.0

[PATCH 07/44] arm64: dts: renesas: r8a774c0: Add INTC-EX device node

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add support for the Interrupt Controller for External Devices
(INTC-EX) on RZ/G2E.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 872efa755532..895f407f7043 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -126,6 +126,22 @@
 			#power-domain-cells = <1>;
 		};
 
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774c0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a774c0",
 				     "renesas,rcar-gen3-hscif",
-- 
2.11.0

[PATCH 08/44] arm64: dts: renesas: r8a774c0: Add PFC support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add PFC support to the RZ/G2E (a.k.a. r8a774c0) SoC specific
device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 895f407f7043..afb4751219fa 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -105,6 +105,11 @@
 		#size-cells = <2>;
 		ranges;
 
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a774c0";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a774c0-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
-- 
2.11.0

[PATCH 09/44] arm64: dts: renesas: r8a774c0: Add GPIO device nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add GPIO device nodes to the DT of the r8a774c0 SoC.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 105 ++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index afb4751219fa..f09a240acb15 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -105,6 +105,111 @@
 		#size-cells = <2>;
 		ranges;
 
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 11>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 20>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
 		pfc: pin-controller@e6060000 {
 			compatible = "renesas,pfc-r8a774c0";
 			reg = <0 0xe6060000 0 0x508>;
-- 
2.11.0

[PATCH 10/44] arm64: dts: renesas: r8a774c0: Add Ethernet AVB node

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

This patch adds the SoC specific part of the Ethernet AVB
device tree node.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 45 +++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index f09a240acb15..ea405289bcf5 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -442,6 +442,51 @@
 			dma-channels = <16>;
 		};
 
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774c0",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		scif0: serial@e6e60000 {
 			compatible = "renesas,scif-r8a774c0",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
-- 
2.11.0

[PATCH 11/44] arm64: dts: renesas: r8a774c0: Add watchdog support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add watchdog support to the RZ/G2E (a.k.a. R8A774C0) SoC
specific device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index ea405289bcf5..a51b6d37f0cb 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -105,6 +105,16 @@
 		#size-cells = <2>;
 		ranges;
 
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774c0-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a774c0",
 				     "renesas,rcar-gen3-gpio";
-- 
2.11.0

[PATCH 12/44] arm64: dts: renesas: r8a774c0: Add secondary CA53 CPU core

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add a device node for the second Cortex-A53 CPU core on the Renesas
RZ/G2E (a.k.a r8a774c0) SoC, and adjust the interrupt delivery masks
for the ARM Generic Interrupt Controller and Architectured Timer.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index a51b6d37f0cb..83db7c740481 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -48,7 +48,6 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* 1 core only at this point */
 		a53_0: cpu@0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0>;
@@ -58,6 +57,15 @@
 			enable-method = "psci";
 		};
 
+		a53_1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774C0_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
 		L2_CA53: cache-controller-0 {
 			compatible = "cache";
 			power-domains = <&sysc R8A774C0_PD_CA53_SCU>;
@@ -82,8 +90,9 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&a53_0>;
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
 	};
 
 	psci {
@@ -604,7 +613,7 @@
 			      <0x0 0xf1040000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x20000>;
 			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -619,10 +628,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	/* External USB clocks - can be overridden by the board */
-- 
2.11.0

[PATCH 13/44] arm64: dts: renesas: r8a774c0: Add SDHI nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add SDHI nodes to the DT of the r8a774c0 SoC.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 36 +++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 83db7c740481..96a71e3f9fe4 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -603,6 +603,42 @@
 			status = "disabled";
 		};
 
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
-- 
2.11.0

[PATCH 14/44] arm64: dts: renesas: r8a774c0: Add I2C and IIC-DVFS support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add the I2C[0-7] and IIC Bus Interface for DVFS (IIC for DVFS)
devices nodes to the r8a774c0 device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 143 ++++++++++++++++++++++++++++++
 1 file changed, 143 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 96a71e3f9fe4..bf08aba0f4d6 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -271,6 +271,149 @@
 			resets = <&cpg 407>;
 		};
 
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6690000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6690000 0 0x40>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1003>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 1003>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774c0";
+			reg = <0 0xe60b0000 0 0x15>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a774c0",
 				     "renesas,rcar-gen3-hscif",
-- 
2.11.0

[PATCH 15/44] arm64: dts: renesas: r8a774c0: Add IPMMU device nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add r8a774c0 IPMMU nodes.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 73 +++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index bf08aba0f4d6..042e26da08b2 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -604,6 +604,79 @@
 			dma-channels = <16>;
 		};
 
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774C0_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a774c0",
 				     "renesas,etheravb-rcar-gen3";
-- 
2.11.0

[PATCH 16/44] arm64: dts: renesas: r8a774c0: Add CAN nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add the device nodes for both RZ/G2E CAN channels.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 042e26da08b2..446cab189c10 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -722,6 +722,30 @@
 			status = "disabled";
 		};
 
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774c0",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
+			clock-names = "clkp1", "can_clk";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774c0",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
+			clock-names = "clkp1", "can_clk";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
 		scif0: serial@e6e60000 {
 			compatible = "renesas,scif-r8a774c0",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
-- 
2.11.0

[PATCH 17/44] arm64: dts: renesas: r8a774c0: Add thermal support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

This patch adds the thermal device node and the thermal-zones
node to the SoC specific dtsi for the RZ/G2E.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 446cab189c10..9532d2960f9c 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -255,6 +255,18 @@
 			#power-domain-cells = <1>;
 		};
 
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a774c0";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		intc_ex: interrupt-controller@e61c0000 {
 			compatible = "renesas,intc-ex-r8a774c0", "renesas,irqc";
 			#interrupt-cells = <2>;
@@ -902,6 +914,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-- 
2.11.0

[PATCH 18/44] arm64: dts: renesas: r8a774c0: Add MSIOF nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add the device nodes for all MSIOF SPI controllers on RZ/G2E SoC.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 62 +++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 9532d2960f9c..9bd66b1474d5 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -855,6 +855,68 @@
 			status = "disabled";
 		};
 
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		sdhi0: sd@ee100000 {
 			compatible = "renesas,sdhi-r8a774c0",
 				     "renesas,rcar-gen3-sdhi";
-- 
2.11.0

[PATCH 19/44] arm64: dts: renesas: r8a774c0: Add audio support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add sound support for the RZ/G2E SoC (a.k.a. R8A774C0).

This work is based on similar work done on the R8A77990 SoC
by Yoshihiro Kaneko <ykaneko0929@gmail.com>.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 241 ++++++++++++++++++++++++++++++
 1 file changed, 241 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 9bd66b1474d5..35b27b81bcd4 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -917,6 +917,247 @@
 			status = "disabled";
 		};
 
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a774c0",
+				     "renesas,rcar_sound-gen3";
+			reg =	<0 0xec500000 0 0x1000>, /* SCU */
+				<0 0xec5a0000 0 0x100>,  /* ADG */
+				<0 0xec540000 0 0x1000>, /* SSIU */
+				<0 0xec541000 0 0x280>,  /* SSI */
+				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774C0_CLK_ZA2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma0 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma0 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma0 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma0 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
 		sdhi0: sd@ee100000 {
 			compatible = "renesas,sdhi-r8a774c0",
 				     "renesas,rcar-gen3-sdhi";
-- 
2.11.0

[PATCH 20/44] arm64: dts: renesas: r8a774c0: Add PWM support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add PWM support to the RZ/G2E (a.k.a. R8A774C0) SoC specific
device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 70 +++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 35b27b81bcd4..d87652087dde 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -758,6 +758,76 @@
 			status = "disabled";
 		};
 
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		scif0: serial@e6e60000 {
 			compatible = "renesas,scif-r8a774c0",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
-- 
2.11.0

[PATCH 21/44] arm64: dts: renesas: r8a774c0: Add display output support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

The RZ/G2E (a.k.a. R8A774C0) has one RGB output and two LVDS
outputs connected to DU.
This patch add support for DU, LVDS encoders, VSP and FCP.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 167 ++++++++++++++++++++++++++++++
 1 file changed, 167 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index d87652087dde..f3c4910e6585 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1281,6 +1281,173 @@
 			resets = <&cpg 408>;
 		};
 
+		vspb0: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 626>;
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 631>;
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vp0 8>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x7000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x7000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774c0";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			vsps = <&vspd0 0 &vspd1 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a774c0-lvds";
+			reg = <0 0xfeb90000 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		lvds1: lvds-encoder@feb90100 {
+			compatible = "renesas,r8a774c0-lvds";
+			reg = <0 0xfeb90100 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds1_out: endpoint {
+					};
+				};
+			};
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
-- 
2.11.0

[PATCH 22/44] arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add USB2.0 phy and host (EHCI/OHCI) device tree nodes to the RZ/G2E
SoC dtsi.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 37 +++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index f3c4910e6585..0ab3aa66354c 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1228,6 +1228,43 @@
 			dma-channels = <16>;
 		};
 
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774c0",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		sdhi0: sd@ee100000 {
 			compatible = "renesas,sdhi-r8a774c0",
 				     "renesas,rcar-gen3-sdhi";
-- 
2.11.0

[PATCH 23/44] arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add usb dmac and hsusb device nodes on RZ/G2E SoC dtsi.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 45 +++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 0ab3aa66354c..79cdaacc2c8c 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -514,6 +514,51 @@
 			status = "disabled";
 		};
 
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774c0",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774c0-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774c0-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
-- 
2.11.0

[PATCH 24/44] arm64: dts: renesas: r8a774c0: Add USB3.0 device nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add usb3.0 host and function device nodes to the RZ/G2E SoC dtsi.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 79cdaacc2c8c..6491fddaa489 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1273,6 +1273,28 @@
 			dma-channels = <16>;
 		};
 
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774c0",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774c0-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
 		ohci0: usb@ee080000 {
 			compatible = "generic-ohci";
 			reg = <0 0xee080000 0 0x100>;
-- 
2.11.0

[PATCH 25/44] arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Hook up SYS-DMAC0, SYS-DMAC1, and SYS-DMAC2 to IPMMU-DS0 and
IPMMU-DS1, according to what reported by the RZ/G2 User's manual.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 6491fddaa489..5186a1b4201b 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -591,6 +591,14 @@
 			resets = <&cpg 219>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
 		};
 
 		dmac1: dma-controller@e7300000 {
@@ -625,6 +633,14 @@
 			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
 		};
 
 		dmac2: dma-controller@e7310000 {
@@ -659,6 +675,14 @@
 			resets = <&cpg 217>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
 		ipmmu_ds0: mmu@e6740000 {
-- 
2.11.0

[PATCH 26/44] arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMU

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Hook up the RZ/G2E AVB device to IPMMU-DS0 as stated by the
RZ/G2 User's manual.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 5186a1b4201b..58d4c60c54c3 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -798,6 +798,7 @@
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
-- 
2.11.0

[PATCH 27/44] arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMU

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Hook up the RZ/G2E Audio-DMAC device to IPMMU-MP as stated by the
RZ/G2 User's manual.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 58d4c60c54c3..6247ebc22b2a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1296,6 +1296,14 @@
 			resets = <&cpg 502>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+				 <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+				 <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+				 <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+				 <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+				 <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+				 <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+				 <&ipmmu_mp 14>, <&ipmmu_mp 15>;
 		};
 
 		xhci0: usb@ee000000 {
-- 
2.11.0

[PATCH 28/44] arm64: dts: renesas: r8a774c0: Add PCIe device node

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

This patch adds PCI express channel 0 device tree node to the
RZ/G2E (a.k.a. R8A774C0) SoC dtsi.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 6247ebc22b2a..c13c1827d5d9 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1418,6 +1418,33 @@
 			resets = <&cpg 408>;
 		};
 
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774c0",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
 		vspb0: vsp@fe960000 {
 			compatible = "renesas,vsp2";
 			reg = <0 0xfe960000 0 0x8000>;
-- 
2.11.0

[PATCH 29/44] arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add device nodes for VIN4, VIN5 and CSI40 to RZ/G2E (a.k.a. R8A774C0)
SoC specific device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 88 +++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index c13c1827d5d9..3970aafeee12 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1057,6 +1057,62 @@
 			status = "disabled";
 		};
 
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774c0";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint= <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774c0";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint= <&csi40vin5>;
+					};
+				};
+			};
+		};
+
 		rcar_sound: sound@ec500000 {
 			/*
 			 * #sound-dai-cells is required
@@ -1521,6 +1577,38 @@
 			iommus = <&ipmmu_vi0 9>;
 		};
 
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774c0-csi2",
+				     "renesas,rcar-gen3-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi40>;
+					};
+				};
+			};
+		};
+
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a774c0";
 			reg = <0 0xfeb00000 0 0x80000>;
-- 
2.11.0

[PATCH 30/44] arm64: dts: renesas: r8a774a1: Fix hsusb reg size

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

HS-USB has registers outside the currently specified memory area,
therefore change the definition accordingly.

Fixes: ed898d4fc19d ("arm64: dts: renesas: r8a774a1: Add USB-DMAC and HSUSB device nodes")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 20745a8528c5..46a8fd20108f 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -599,7 +599,7 @@
 		hsusb: usb@e6590000 {
 			compatible = "renesas,usbhs-r8a774a1",
 				     "renesas,rcar-gen3-usbhs";
-			reg = <0 0xe6590000 0 0x100>;
+			reg = <0 0xe6590000 0 0x200>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 704>;
 			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
-- 
2.11.0

[PATCH 31/44] arm64: dts: renesas: r8a77990: sort pciec0 node within soc node

[Simon Horman]

Move the pciec0 node so that sub-nodes of the soc node are
sorted by bus address.

This change has no run-time affect.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 54 +++++++++++++++----------------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index b2f606e286ce..bdc7f7d39820 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1526,6 +1526,33 @@
 			resets = <&cpg 408>;
 		};
 
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77990",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
 		vspb0: vsp@fe960000 {
 			compatible = "renesas,vsp2";
 			reg = <0 0xfe960000 0 0x8000>;
@@ -1724,33 +1751,6 @@
 			};
 		};
 
-		pciec0: pcie@fe000000 {
-			compatible = "renesas,pcie-r8a77990",
-				     "renesas,pcie-rcar-gen3";
-			reg = <0 0xfe000000 0 0x80000>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			bus-range = <0x00 0xff>;
-			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
-			clock-names = "pcie", "pcie_bus";
-			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
-			resets = <&cpg 319>;
-			status = "disabled";
-		};
-
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
-- 
2.11.0

[PATCH 32/44] arm64: dts: renesas: r8a77990: Sort i2c nodes within soc node

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Move the i2c nodes so that sub-nodes of the soc node are sorted by bus
address.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 136 +++++++++++++++---------------
 1 file changed, 68 insertions(+), 68 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index bdc7f7d39820..84bbe70cb0ab 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -240,6 +240,74 @@
 			resets = <&cpg 906>;
 		};
 
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a77990";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77990";
+			reg = <0 0xe60b0000 0 0x15>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77990-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77990-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77990-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77990";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77990", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
 		i2c0: i2c@e6500000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -369,74 +437,6 @@
 			status = "disabled";
 		};
 
-		pfc: pin-controller@e6060000 {
-			compatible = "renesas,pfc-r8a77990";
-			reg = <0 0xe6060000 0 0x508>;
-		};
-
-		i2c_dvfs: i2c@e60b0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "renesas,iic-r8a77990";
-			reg = <0 0xe60b0000 0 0x15>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 926>;
-			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
-			resets = <&cpg 926>;
-			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		cpg: clock-controller@e6150000 {
-			compatible = "renesas,r8a77990-cpg-mssr";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
-			clock-names = "extal";
-			#clock-cells = <2>;
-			#power-domain-cells = <0>;
-			#reset-cells = <1>;
-		};
-
-		rst: reset-controller@e6160000 {
-			compatible = "renesas,r8a77990-rst";
-			reg = <0 0xe6160000 0 0x0200>;
-		};
-
-		sysc: system-controller@e6180000 {
-			compatible = "renesas,r8a77990-sysc";
-			reg = <0 0xe6180000 0 0x0400>;
-			#power-domain-cells = <1>;
-		};
-
-		thermal: thermal@e6190000 {
-			compatible = "renesas,thermal-r8a77990";
-			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 522>;
-			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
-			resets = <&cpg 522>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		intc_ex: interrupt-controller@e61c0000 {
-			compatible = "renesas,intc-ex-r8a77990", "renesas,irqc";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
-			resets = <&cpg 407>;
-		};
-
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a77990",
 				     "renesas,rcar-gen3-hscif",
-- 
2.11.0

[PATCH 33/44] arm64: dts: renesas: r8a7796: salvator-xs: Convert to new LVDS DT bindings

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

As of commit 6d2ca85279becdff ("dt-bindings: display: renesas: Deprecate
LVDS support in the DU bindings"), the internal LVDS encoder has DT
bindings separate from the DU.  The device trees for all R-Car H3 and
M3-W development boards were ported over to the new model, but
Salvator-XS boards equipped with an R-Car M3-W SoC were forgotten.

Fixes: 58e8ed2ee9abe718 ("arm64: dts: renesas: Convert to new LVDS DT bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
index 8860be65342e..31f12059355e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
@@ -29,11 +29,10 @@
 	clocks = <&cpg CPG_MOD 724>,
 		 <&cpg CPG_MOD 723>,
 		 <&cpg CPG_MOD 722>,
-		 <&cpg CPG_MOD 727>,
 		 <&versaclock6 1>,
 		 <&x21_clk>,
 		 <&versaclock6 2>;
-	clock-names = "du.0", "du.1", "du.2", "lvds.0",
+	clock-names = "du.0", "du.1", "du.2",
 		      "dclkin.0", "dclkin.1", "dclkin.2";
 };
 
-- 
2.11.0

[PATCH 34/44] arm64: dts: renesas: ulcb: use audio-graph-card

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

ULCB can use daughter board which is called as KingFisher.
It has extra sound interface, thus we want to use it.
But, basically, ALSA SoC can't use Multiple sound card with single
CPU sound interface (= SSI). Thus we need to use Single Sound Card
with multiple DAI interface.

To be easy to expand ULCB sound card on KingFisher, it is better to
use multi-dai-link style sound card on ULCB sound DT.

Now, "simple-audio-card" / "audio-graph-card" both can support
multi-dai-link style, but HDMI sound support (which is not yet supported
on ULCB) needs "audio-graph-card".
Using audio-graph-card is better selection.
This patch exchange current sound card to use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/ulcb.dtsi | 39 ++++++++++++++++++++---------------
 1 file changed, 22 insertions(+), 17 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index de694fdae067..8c6c45863ac8 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -83,20 +83,11 @@
 		regulator-always-on;
 	};
 
-	rsnd_ak4613: sound {
-		compatible = "simple-audio-card";
+	sound_card: sound {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
 
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcpu>;
-		simple-audio-card,frame-master = <&sndcpu>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&ak4613>;
-		};
+		dais = <&rsnd_port0>;
 	};
 
 	vcc_sdhi0: regulator-vcc-sdhi0 {
@@ -211,6 +202,12 @@
 		asahi-kasei,out4-single-end;
 		asahi-kasei,out5-single-end;
 		asahi-kasei,out6-single-end;
+
+		port {
+			ak4613_endpoint: endpoint {
+				remote-endpoint = <&rsnd_for_ak4613>;
+			};
+		};
 	};
 
 	cs2000: clk-multiplier@4f {
@@ -384,10 +381,18 @@
 		 <&audio_clk_c>,
 		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
 
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0 &src0 &dvc0>;
-			capture  = <&ssi1 &src1 &dvc1>;
+	ports {
+		rsnd_port0: port {
+			rsnd_for_ak4613: endpoint {
+				remote-endpoint = <&ak4613_endpoint>;
+
+				dai-format = "left_j";
+				bitclock-master = <&rsnd_for_ak4613>;
+				frame-master = <&rsnd_for_ak4613>;
+
+				playback = <&ssi0 &src0 &dvc0>;
+				capture  = <&ssi1 &src1 &dvc1>;
+			};
 		};
 	};
 };
-- 
2.11.0

[PATCH 35/44] arm64: dts: renesas: ulcb: add HDMI sound support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch adds missing ULCB HDMI sound support.
To use sound card, HDMI video is mandatory.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/ulcb.dtsi | 35 +++++++++++++++++++++++++++++++++--
 1 file changed, 33 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 8c6c45863ac8..a3878fb3c3f1 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -6,6 +6,14 @@
  * Copyright (C) 2016 Cogent Embedded, Inc.
  */
 
+/*
+ * SSI-AK4613
+ *	aplay   -D plughw:0,0 xxx.wav
+ *	arecord -D plughw:0,0 xxx.wav
+ * SSI-HDMI
+ *	aplay   -D plughw:0,1 xxx.wav
+ */
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
@@ -87,7 +95,9 @@
 		compatible = "audio-graph-card";
 		label = "rcar-sound";
 
-		dais = <&rsnd_port0>;
+		dais = <&rsnd_port0	/* ak4613 */
+			&rsnd_port1	/* HDMI0  */
+			>;
 	};
 
 	vcc_sdhi0: regulator-vcc-sdhi0 {
@@ -173,6 +183,12 @@
 				remote-endpoint = <&hdmi0_con>;
 			};
 		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_for_hdmi>;
+			};
+		};
 	};
 };
 
@@ -382,7 +398,10 @@
 		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
 
 	ports {
-		rsnd_port0: port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			reg = <0>;
 			rsnd_for_ak4613: endpoint {
 				remote-endpoint = <&ak4613_endpoint>;
 
@@ -394,6 +413,18 @@
 				capture  = <&ssi1 &src1 &dvc1>;
 			};
 		};
+		rsnd_port1: port@1 {
+			reg = <1>;
+			rsnd_for_hdmi: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_for_hdmi>;
+				frame-master = <&rsnd_for_hdmi>;
+
+				playback = <&ssi2>;
+			};
+		};
 	};
 };
 
-- 
2.11.0

[PATCH 36/44] arm64: dts: renesas: ulcb-kf: add pcm3168 sound codec

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

KingFisher has pcm3168 sound codec. This patch enables it.
Because pcm3168 can't handle symmetric channel on playback/
capture, we need to handle it as different DAI.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 138 +++++++++++++++++++++++++++++++
 1 file changed, 138 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 1b316d79df88..7a09576b3112 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -6,11 +6,38 @@
  * Copyright (C) 2017 Cogent Embedded, Inc.
  */
 
+/*
+ * SSI-PCM3168A
+ *	aplay   -D plughw:0,2 xxx.wav
+ *	arecord -D plughw:0,3 xxx.wav
+ */
+
 / {
 	aliases {
 		serial1 = &hscif0;
 		serial2 = &scif1;
 	};
+
+	clksndsel: clksndsel {
+		#clock-cells = <0>;
+		compatible = "gpio-mux-clock";
+		clocks = <&cs2000>, <&audio_clk_a>; /* clk8snd, clksnd */
+		select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
+	};
+
+	snd_3p3v: regulator-snd_3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "snd-3.3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	snd_vcc5v: regulator-snd_vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "snd-vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
 };
 
 &can0 {
@@ -44,6 +71,7 @@
 };
 
 &i2c2 {
+	/* U11 */
 	gpio_exp_74: gpio@74 {
 		compatible = "ti,tca9539";
 		reg = <0x74>;
@@ -53,6 +81,13 @@
 		interrupt-parent = <&gpio6>;
 		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 
+		audio_out_off {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */
+			output-high;
+			line-name = "Audio_Out_OFF";
+		};
+
 		hub_pwen {
 			gpio-hog;
 			gpios = <6 GPIO_ACTIVE_HIGH>;
@@ -80,8 +115,16 @@
 			output-high;
 			line-name = "OTG EXTLPn";
 		};
+
+		snd_rst {
+			gpio-hog;
+			gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */
+			output-high;
+			line-name = "SND_RST";
+		};
 	};
 
+	/* U5 */
 	gpio_exp_75: gpio@75 {
 		compatible = "ti,tca9539";
 		reg = <0x75>;
@@ -98,6 +141,48 @@
 		#size-cells = <0>;
 		reg = <0x71>;
 		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+
+		/* Audio_SDA, Audio_SCL */
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			pcm3168a: audio-codec@44 {
+				#sound-dai-cells = <0>;
+				compatible = "ti,pcm3168a";
+				reg = <0x44>;
+				clocks = <&clksndsel>;
+				clock-names = "scki";
+
+				VDD1-supply	= <&snd_3p3v>;
+				VDD2-supply	= <&snd_3p3v>;
+				VCCAD1-supply	= <&snd_vcc5v>;
+				VCCAD2-supply	= <&snd_vcc5v>;
+				VCCDA1-supply	= <&snd_vcc5v>;
+				VCCDA2-supply	= <&snd_vcc5v>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					mclk-fs = <512>;
+					port@0 {
+						reg = <0>;
+						pcm3168a_endpoint_p: endpoint {
+							remote-endpoint = <&rsnd_for_pcm3168a_play>;
+							clocks = <&clksndsel>;
+						};
+					};
+					port@1 {
+						reg = <1>;
+						pcm3168a_endpoint_c: endpoint {
+							remote-endpoint = <&rsnd_for_pcm3168a_capture>;
+							clocks = <&clksndsel>;
+						};
+					};
+				};
+			};
+		};
 	};
 };
 
@@ -173,6 +258,11 @@
 		groups = "usb0";
 		function = "usb0";
 	};
+
+	sound_pcm_pins: sound-pcm {
+		groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
+		function = "ssi";
+	};
 };
 
 &scif1 {
@@ -193,3 +283,51 @@
 &xhci0 {
 	status = "okay";
 };
+
+&sound_card {
+	dais = <&rsnd_port0	/* ak4613 */
+		&rsnd_port1	/* HDMI0  */
+		&rsnd_port2	/* pcm3168a playback */
+		&rsnd_port3	/* pcm3168a capture  */
+		>;
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins
+		     &sound_clk_pins
+		     &sound_pcm_pins>;
+
+	ports {
+		/* rsnd_port0/1 are on salvator-common */
+		rsnd_port2: port@2 {
+			reg = <2>;
+			rsnd_for_pcm3168a_play: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_for_pcm3168a_play>;
+				frame-master = <&rsnd_for_pcm3168a_play>;
+				dai-tdm-slot-num = <8>;
+
+				playback = <&ssi3>;
+			};
+		};
+		rsnd_port3: port@3 {
+			reg = <3>;
+			rsnd_for_pcm3168a_capture: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_c>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_for_pcm3168a_capture>;
+				frame-master = <&rsnd_for_pcm3168a_capture>;
+				dai-tdm-slot-num = <6>;
+
+				capture  = <&ssi4>;
+			};
+		};
+	};
+};
+
+&ssi4 {
+	shared-pin;
+};
-- 
2.11.0

[PATCH 37/44] arm64: dts: renesas: r8a7795: remove BUSIF0 settings from rcar_sound,ssi

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Before, BUSIF which is needed for DMA transfer was automatically handled
via SSI, but it cared BUSIF0 only.
Now, rsnd driver can handle BUSIF0-7 (= for Gen3) BUSIF0-3 (= for Gen2)
via SSIU, and it is keeping compatibility.
Thus, BUSIF0 settings via SSI had been kept to avoid git merge timing
issue / git bisect issue, but it is no longer needed.
This patch removes it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 40 ++++++++++++++++----------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index af9605d5db27..a81ed2ba63e7 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -2174,53 +2174,53 @@
 			rcar_sound,ssi {
 				ssi0: ssi-0 {
 					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
 				};
 				ssi1: ssi-1 {
 					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
 				};
 				ssi2: ssi-2 {
 					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
 				};
 				ssi3: ssi-3 {
 					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
 				};
 				ssi4: ssi-4 {
 					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
 				};
 				ssi5: ssi-5 {
 					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
 				};
 				ssi6: ssi-6 {
 					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
 				};
 				ssi7: ssi-7 {
 					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
 				};
 				ssi8: ssi-8 {
 					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
 				};
 				ssi9: ssi-9 {
 					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
 				};
 			};
 		};
-- 
2.11.0

[GIT PULL] Renesas ARM64 Based SoC DT Updates for v5.1

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM64 based SoC DT updates for v5.1.

I am sending this pull-request now as a number of patches
have accumulated in this branch. I expect to send a follow-up
pull-request closer to the usual rc6 timing.


The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:

  Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt-for-v5.1

for you to fetch changes up to 3e279a1d44d73aea9ce428ae68e76bf85117031a:

  arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3 (2019-01-23 09:45:41 +0100)

----------------------------------------------------------------
Renesas ARM64 Based SoC DT Updates for v5.1

R-Car H3 (r8a7795) SoC
- Sort i2c and pciec0 nodes within soc node
R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
- Remove BUSIF0 settings from rcar_sound,ssi

R-Car M3-W (r8a7796) based Salvator-XS board
- Convert to new LVDS DT bindings

R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards
- Use audio-graph-card to allow secondary sound device on kingfisher
  daugher board
- Add HDMI sound support

Kingfisher daughterboard for R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N
(r8a77965) based ULCB boards
- Add pcm3168 sound codec

R-Car E3 (r8a77990) SoC
- Enable DMA for SCIF2

R-Car E3 (r8a77990) based Ebisu board
- HS400 for onboard eMMC
- Use simple-audio-card rather than simple-scu-audio-card
- Correct EthernetAVB phy mode as rgmii
- Add backlight and follow-up to correct duplicate regulator number

R-Car V3M (r8a77970) based v3msk starter kit
- Specify EtherAVB PHY IRQ now that GPIO support is present

R-Car D3 (r8a77995) based draak board
- Set better backlight levels

RZ/G2M (r8a774a1) SoC
- Correct hsusb reg size

RZ/G2E (r8a774c0) SoC
- Intial SoC DT
- Add: and SYS-DMAC controller, SCIF, HSCIF, INTC-EX
  PFC, GPIO, Ethernet AVB, watchdog, secondary CA3 core, SDHI,
  I2C, IIC-DVFS, IPMU, CAN, thermal, MSIOF, audio, PWM, display output,
  USB2.0, USB-DMAC, HSUSB, USB3.0, IPMMU, PCIe, VIN and CSI-2 support
- A follow-up patch included in this pull-request enables DMA for SCIF2
  so that DMA is enabled for all SCIF nodes

----------------------------------------------------------------
Fabrizio Castro (27):
      arm64: dts: renesas: Initial device tree for r8a774c0
      arm64: dts: renesas: r8a774c0: Add SYS-DMAC controller nodes
      arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes
      arm64: dts: renesas: r8a774c0: Add INTC-EX device node
      arm64: dts: renesas: r8a774c0: Add PFC support
      arm64: dts: renesas: r8a774c0: Add GPIO device nodes
      arm64: dts: renesas: r8a774c0: Add Ethernet AVB node
      arm64: dts: renesas: r8a774c0: Add watchdog support
      arm64: dts: renesas: r8a774c0: Add secondary CA53 CPU core
      arm64: dts: renesas: r8a774c0: Add SDHI nodes
      arm64: dts: renesas: r8a774c0: Add I2C and IIC-DVFS support
      arm64: dts: renesas: r8a774c0: Add IPMMU device nodes
      arm64: dts: renesas: r8a774c0: Add CAN nodes
      arm64: dts: renesas: r8a774c0: Add thermal support
      arm64: dts: renesas: r8a774c0: Add MSIOF nodes
      arm64: dts: renesas: r8a774c0: Add audio support
      arm64: dts: renesas: r8a774c0: Add PWM support
      arm64: dts: renesas: r8a774c0: Add display output support
      arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodes
      arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodes
      arm64: dts: renesas: r8a774c0: Add USB3.0 device nodes
      arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU
      arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMU
      arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMU
      arm64: dts: renesas: r8a774c0: Add PCIe device node
      arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes
      arm64: dts: renesas: r8a774a1: Fix hsusb reg size

Geert Uytterhoeven (4):
      arm64: dts: renesas: r8a77990: Sort i2c nodes within soc node
      arm64: dts: renesas: r8a7796: salvator-xs: Convert to new LVDS DT bindings
      arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2
      arm64: dts: renesas: r8a77990: Enable DMA for SCIF2

Kazuya Mizuguchi (1):
      arm64: dts: renesas: r8a77990: ebisu: Fix EthernetAVB phy mode to rgmii

Kuninori Morimoto (6):
      arm64: dts: renesas: ulcb: use audio-graph-card
      arm64: dts: renesas: ulcb: add HDMI sound support
      arm64: dts: renesas: ulcb-kf: add pcm3168 sound codec
      arm64: dts: renesas: r8a7795: remove BUSIF0 settings from rcar_sound,ssi
      arm64: dts: renesas: r8a7796: remove BUSIF0 settings from rcar_sound,ssi
      arm64: dts: renesas: r8a77990-ebisu: use simple-audio-card

Laurent Pinchart (2):
      arm64: dts: renesas: r8a77990: ebisu: Add backlight
      arm64: dts: renesas: r8a77995: draak: Set better backlight levels

Marek Vasut (1):
      arm64: dts: renesas: r8a77990: ebisu: Fix backlight regulator numbering

Sergei Shtylyov (1):
      arm64: dts: renesas: v3msk: specify EtherAVB PHY IRQ

Simon Horman (2):
      arm64: dts: renesas: r8a77990: sort pciec0 node within soc node
      arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3

 arch/arm64/boot/dts/renesas/r8a774a1.dtsi          |    2 +-
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi          | 1751 ++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a7795.dtsi           |   40 +-
 .../arm64/boot/dts/renesas/r8a7796-salvator-xs.dts |    3 +-
 arch/arm64/boot/dts/renesas/r8a7796.dtsi           |   40 +-
 arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts     |    2 +
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts     |   26 +-
 arch/arm64/boot/dts/renesas/r8a77990.dtsi          |  194 +--
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts     |    4 +-
 arch/arm64/boot/dts/renesas/ulcb-kf.dtsi           |  138 ++
 arch/arm64/boot/dts/renesas/ulcb.dtsi              |   70 +-
 11 files changed, 2107 insertions(+), 163 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0.dtsi

[PATCH 38/44] arm64: dts: renesas: r8a7796: remove BUSIF0 settings from rcar_sound,ssi

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Before, BUSIF which is needed for DMA transfer was automatically handled
via SSI, but it cared BUSIF0 only.
Now, rsnd driver can handle BUSIF0-7 (= for Gen3) BUSIF0-3 (= for Gen2)
via SSIU, and it is keeping compatibility.
Thus, BUSIF0 settings via SSI had been kept to avoid git merge timing
issue / git bisect issue, but it is no longer needed.
This patch removes it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 40 ++++++++++++++++----------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index afedbf5728ec..3a9f8c7081ca 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -2110,53 +2110,53 @@
 			rcar_sound,ssi {
 				ssi0: ssi-0 {
 					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
 				};
 				ssi1: ssi-1 {
 					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
 				};
 				ssi2: ssi-2 {
 					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
 				};
 				ssi3: ssi-3 {
 					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
 				};
 				ssi4: ssi-4 {
 					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
 				};
 				ssi5: ssi-5 {
 					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
 				};
 				ssi6: ssi-6 {
 					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
 				};
 				ssi7: ssi-7 {
 					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
 				};
 				ssi8: ssi-8 {
 					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
 				};
 				ssi9: ssi-9 {
 					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
-					dma-names = "rx", "tx", "rxu", "txu";
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
 				};
 			};
 
-- 
2.11.0

[PATCH 39/44] arm64: dts: renesas: r8a77990-ebisu: use simple-audio-card

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current Ebisu board is using simple-scu-audio-card
which is used for Sampling Rate Convert, or MIXer, etc.
But, Ebisu is not using such feature.
Then, simple-audio-card is very enough.
This patch fixup it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 8b66ee86e7bb..e0590c0af4c4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -169,16 +169,13 @@
 	};
 
 	rsnd_ak4613: sound {
-		compatible = "simple-scu-audio-card";
+		compatible = "simple-audio-card";
 
 		simple-audio-card,name = "rsnd-ak4613";
 		simple-audio-card,format = "left_j";
 		simple-audio-card,bitclock-master = <&sndcpu>;
 		simple-audio-card,frame-master = <&sndcpu>;
 
-		simple-audio-card,prefix = "ak4613";
-		simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback",
-		"DAI0 Capture", "ak4613 Capture";
 		sndcpu: simple-audio-card,cpu {
 			sound-dai = <&rcar_sound>;
 		};
-- 
2.11.0

[PATCH 40/44] arm64: dts: renesas: v3msk: specify EtherAVB PHY IRQ

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Specify EtherAVB PHY IRQ in the V3M Starter Kit board's device tree, now
that we have the GPIO support (previously phylib had to resort to polling).

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 0dbcb4cccc18..15cc9fed2e16 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -108,6 +108,8 @@
 	phy0: ethernet-phy@0 {
 		rxc-skew-ps = <1500>;
 		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
-- 
2.11.0

[PATCH 41/44] arm64: dts: renesas: r8a77990: ebisu: Fix backlight regulator numbering

[Simon Horman]

From: Marek Vasut <marek.vasut+renesas@gmail.com>

There are two regulator1 nodes in the Ebisu DTS right now, one 3.3V for
the eMMC and one 12V for the backlight. This causes one to be overwritten
by the other, ultimatelly resulting in inoperable eMMC, which depends on
the former. Fix this by renumbering the backlight regulator to regulator2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reported-by: Simon Horman <horms+renesas@verge.net.au>
Fixes: 9d16c4a10e07 ("arm64: dts: renesas: r8a77990: ebisu: Add backlight")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index e0590c0af4c4..89383aa35d65 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -191,7 +191,7 @@
 		clock-frequency = <24576000>;
 	};
 
-	reg_12p0v: regulator1 {
+	reg_12p0v: regulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "D12.0V";
 		regulator-min-microvolt = <12000000>;
-- 
2.11.0

[PATCH 42/44] arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

SCIF2 on RZ/G2E can be used with both DMAC1 and DMAC2.

Fixes: 1b24f9e8ea3ff95f ("arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 3970aafeee12..f2e390f7f1d5 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -941,6 +941,9 @@
 				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
-- 
2.11.0

[PATCH 43/44] arm64: dts: renesas: r8a77990: Enable DMA for SCIF2

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

SCIF2 on R-Car E3 can be used with both DMAC1 and DMAC2.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 84bbe70cb0ab..786178cf1ffd 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -993,7 +993,9 @@
 				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
-
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
-- 
2.11.0

[PATCH 44/44] arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3

[Simon Horman]

Enable HS400 of SDHI3 using the corresponding DT property.
No further changes are required.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 89383aa35d65..144c0820cf60 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -695,6 +695,7 @@
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_1p8v>;
 	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
-- 
2.11.0

Re: [GIT PULL] Renesas ARM64 Based SoC DT Updates for v5.1

[Arnd Bergmann]

On Thu, Jan 24, 2019 at 4:12 PM Simon Horman <horms+renesas@verge.net.au> wrote:
>
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these Renesas ARM64 based SoC DT updates for v5.1.
>
> I am sending this pull-request now as a number of patches
> have accumulated in this branch. I expect to send a follow-up
> pull-request closer to the usual rc6 timing.

Pulled into arm/dt, thanks for sending these early!

      Arnd