linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
	Adam Ford <aford173@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	linux-renesas-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
	devicetree@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 1/9] ARM: dts: renesas: Add compatible properties to KSZ8041 Ethernet PHYs
Date: Thu,  9 Sep 2021 10:49:37 +0200	[thread overview]
Message-ID: <f9e26625924f90eff34fe6f6f02b15fa272c5d80.1631174218.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1631174218.git.geert+renesas@glider.be>

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ8041 PHYs on RZ/G1 and R-Car Gen2 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 2 ++
 arch/arm/boot/dts/r8a7745-sk-rzg1e.dts | 2 ++
 arch/arm/boot/dts/r8a7790-lager.dts    | 2 ++
 arch/arm/boot/dts/r8a7790-stout.dts    | 2 ++
 arch/arm/boot/dts/r8a7791-koelsch.dts  | 2 ++
 arch/arm/boot/dts/r8a7791-porter.dts   | 2 ++
 arch/arm/boot/dts/r8a7793-gose.dts     | 2 ++
 arch/arm/boot/dts/r8a7794-alt.dts      | 2 ++
 arch/arm/boot/dts/r8a7794-silk.dts     | 2 ++
 9 files changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
index 4ace117470e800f8..ce36cf404fa2b1c4 100644
--- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -69,6 +69,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
index 59d1a9bfab05a27e..4ab6d3fcc857f7db 100644
--- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -64,6 +64,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index fa6d986b5d4632cf..57cd2fa722490b08 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -678,6 +678,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index d51f23572d7fc727..c802f9f13c18b837 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -199,6 +199,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 2a8b6fd9095cceba..6e691b6cac05cdf4 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -637,6 +637,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index c6ef636965c16f39..38e2ab928707d99e 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -302,6 +302,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 479e0fdf0c37311e..c8978f4f62e9f2dc 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -595,6 +595,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index f330d796a772c394..99d554fe3329eb7a 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -383,6 +383,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index cafa3046daa4baf4..92a76164432a8976 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -397,6 +397,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-- 
2.25.1


  reply	other threads:[~2021-09-09  8:50 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-09  8:49 [PATCH 0/9] renesas: Add compatible properties to Ethernet PHY nodes Geert Uytterhoeven
2021-09-09  8:49 ` Geert Uytterhoeven [this message]
2021-09-09  8:49 ` [PATCH 2/9] ARM: dts: renesas: Add compatible properties to KSZ8081 Ethernet PHYs Geert Uytterhoeven
2021-09-09  8:49 ` [PATCH 3/9] ARM: dts: renesas: Add compatible properties to KSZ9031 " Geert Uytterhoeven
2021-09-23 11:41   ` Biju Das
2021-09-09  8:49 ` [PATCH 4/9] iARM: dts: renesas: Add compatible properties to LAN8710A " Geert Uytterhoeven
2021-09-09  8:49 ` [PATCH 5/9] ARM: dts: renesas: Add compatible properties to RTL8201FL " Geert Uytterhoeven
2021-09-09  8:49 ` [PATCH 6/9] ARM: dts: renesas: Add compatible properties to uPD6061x " Geert Uytterhoeven
2021-09-09  8:49 ` [PATCH 7/9] arm64: dts: renesas: Add compatible properties to AR8031 " Geert Uytterhoeven
2021-09-09  8:49 ` [PATCH 8/9] arm64: dts: renesas: Add compatible properties to KSZ9031 " Geert Uytterhoeven
2021-09-28  7:40   ` Geert Uytterhoeven
2021-09-09  8:49 ` [PATCH 9/9] arm64: dts: renesas: Add compatible properties to RTL8211E " Geert Uytterhoeven
2021-09-23 11:38   ` Biju Das
2021-09-23 11:00 ` [PATCH 0/9] renesas: Add compatible properties to Ethernet PHY nodes Geert Uytterhoeven
2021-09-23 14:09   ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f9e26625924f90eff34fe6f6f02b15fa272c5d80.1631174218.git.geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=aford173@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=magnus.damm@gmail.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).