From: atish.patra@wdc.com (Atish Patra) To: linux-riscv@lists.infradead.org Subject: [RFC 0/4] GPIO & PWM support for HiFive Unleashed Date: Tue, 9 Oct 2018 11:51:21 -0700 [thread overview] Message-ID: <1539111085-25502-1-git-send-email-atish.patra@wdc.com> (raw) This patch series adds GPIO & PWM drivers and DT documentation for HiFive Unleashed board. The patches are mostly based on Wesley's patch. Wesley W. Terpstra (4): pwm: sifive: Add DT documentation for SiFive PWM Controller. pwm: sifive: Add a driver for SiFive SoC PWM gpio: sifive: Add DT documentation for SiFive GPIO. gpio: sifive: Add GPIO driver for SiFive SoCs .../devicetree/bindings/gpio/gpio-sifive.txt | 28 ++ .../devicetree/bindings/pwm/pwm-sifive.txt | 32 ++ drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-sifive.c | 326 +++++++++++++++++++++ drivers/pwm/Kconfig | 10 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-sifive.c | 240 +++++++++++++++ 8 files changed, 645 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sifive.txt create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sifive.txt create mode 100644 drivers/gpio/gpio-sifive.c create mode 100644 drivers/pwm/pwm-sifive.c -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Atish Patra <atish.patra@wdc.com> To: palmer@sifive.com, linux-riscv@lists.infradead.org, linux-pwm@vger.kernel.org, linux-gpio@vger.kernel.org Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, linus.walleij@linaro.org, linux-kernel@vger.kernel.org, hch@infradead.org, atish.patra@wdc.com, robh+dt@kernel.org, thierry.reding@gmail.com Subject: [RFC 0/4] GPIO & PWM support for HiFive Unleashed Date: Tue, 9 Oct 2018 11:51:21 -0700 [thread overview] Message-ID: <1539111085-25502-1-git-send-email-atish.patra@wdc.com> (raw) Message-ID: <20181009185121.LgPqUB6JXwDce81iHjTZpW6O2pVK7yAcBdS4fFUcudw@z> (raw) This patch series adds GPIO & PWM drivers and DT documentation for HiFive Unleashed board. The patches are mostly based on Wesley's patch. Wesley W. Terpstra (4): pwm: sifive: Add DT documentation for SiFive PWM Controller. pwm: sifive: Add a driver for SiFive SoC PWM gpio: sifive: Add DT documentation for SiFive GPIO. gpio: sifive: Add GPIO driver for SiFive SoCs .../devicetree/bindings/gpio/gpio-sifive.txt | 28 ++ .../devicetree/bindings/pwm/pwm-sifive.txt | 32 ++ drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-sifive.c | 326 +++++++++++++++++++++ drivers/pwm/Kconfig | 10 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-sifive.c | 240 +++++++++++++++ 8 files changed, 645 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sifive.txt create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sifive.txt create mode 100644 drivers/gpio/gpio-sifive.c create mode 100644 drivers/pwm/pwm-sifive.c -- 2.7.4 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2018-10-09 18:51 UTC|newest] Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-09 18:51 Atish Patra [this message] 2018-10-09 18:51 ` [RFC 0/4] GPIO & PWM support for HiFive Unleashed Atish Patra 2018-10-09 18:51 ` [RFC 1/4] pwm: sifive: Add DT documentation for SiFive PWM Controller Atish Patra 2018-10-09 18:51 ` Atish Patra 2018-10-10 13:49 ` Thierry Reding 2018-10-10 13:49 ` Thierry Reding 2018-10-15 22:57 ` Atish Patra 2018-10-15 22:57 ` Atish Patra 2018-10-15 23:19 ` Wesley Terpstra 2018-10-15 23:19 ` Wesley Terpstra 2018-10-16 11:13 ` Thierry Reding 2018-10-16 11:13 ` Thierry Reding 2018-10-16 11:01 ` Thierry Reding 2018-10-16 11:01 ` Thierry Reding 2018-10-16 17:31 ` Paul Walmsley 2018-10-16 17:31 ` Paul Walmsley 2018-10-16 22:04 ` Thierry Reding 2018-10-16 22:04 ` Thierry Reding 2018-10-16 22:20 ` Atish Patra 2018-10-16 22:20 ` Atish Patra 2018-10-17 15:58 ` Rob Herring 2018-10-17 15:58 ` Rob Herring 2018-10-17 21:45 ` Atish Patra 2018-10-17 21:45 ` Atish Patra 2018-11-10 5:38 ` Paul Walmsley 2018-11-10 5:38 ` Paul Walmsley 2018-10-10 13:51 ` Thierry Reding 2018-10-10 13:51 ` Thierry Reding 2018-10-15 22:45 ` Atish Patra 2018-10-15 22:45 ` Atish Patra 2018-10-16 10:51 ` Thierry Reding 2018-10-16 10:51 ` Thierry Reding 2018-10-16 22:42 ` Atish Patra 2018-10-16 22:42 ` Atish Patra 2018-10-09 18:51 ` [RFC 2/4] pwm: sifive: Add a driver for SiFive SoC PWM Atish Patra 2018-10-09 18:51 ` Atish Patra 2018-10-10 13:11 ` Christoph Hellwig 2018-10-10 13:11 ` Christoph Hellwig 2018-10-10 13:44 ` Thierry Reding 2018-10-10 13:44 ` Thierry Reding 2018-10-16 6:28 ` Atish Patra 2018-10-16 6:28 ` Atish Patra 2018-10-10 14:13 ` Thierry Reding 2018-10-10 14:13 ` Thierry Reding 2018-10-16 6:24 ` Atish Patra 2018-10-16 6:24 ` Atish Patra 2018-10-09 18:51 ` [RFC 3/4] gpio: sifive: Add DT documentation for SiFive GPIO Atish Patra 2018-10-09 18:51 ` Atish Patra 2018-10-09 18:51 ` [RFC 4/4] gpio: sifive: Add GPIO driver for SiFive SoCs Atish Patra 2018-10-09 18:51 ` Atish Patra 2018-10-10 12:35 ` Linus Walleij 2018-10-10 12:35 ` Linus Walleij 2018-10-17 1:01 ` Atish Patra 2018-10-17 1:01 ` Atish Patra 2019-09-18 7:32 ` Bin Meng 2018-10-10 13:01 ` Andreas Schwab 2018-10-10 13:01 ` Andreas Schwab 2018-10-10 13:12 ` Christoph Hellwig 2018-10-10 13:12 ` Christoph Hellwig 2018-10-10 13:28 ` Andreas Schwab 2018-10-10 13:28 ` Andreas Schwab
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1539111085-25502-1-git-send-email-atish.patra@wdc.com \ --to=atish.patra@wdc.com \ --cc=linux-riscv@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).