Linux-RISC-V Archive on lore.kernel.org
 help / color / Atom feed
From: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, peter@korsgaard.com,
	andrew@lunn.ch, palmer@sifive.com, paul.walmsley@sifive.com,
	sagar.kadam@sifive.com, linux-i2c@vger.kernel.org,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH REPOST v8 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
Date: Sat,  1 Jun 2019 00:00:23 +0530
Message-ID: <1559327423-13001-4-git-send-email-sagar.kadam@sifive.com> (raw)
In-Reply-To: <1559327423-13001-1-git-send-email-sagar.kadam@sifive.com>

The i2c-ocore driver already has a polling mode interface.But it needs
a workaround for FU540 Chipset on HiFive unleashed board (RevA00).
There is an erratum in FU540 chip that prevents interrupt driven i2c
transfers from working, and also the I2C controller's interrupt bit
cannot be cleared if set, due to this the existing i2c polling mode
interface added in mainline earlier doesn't work, and CPU stall's
infinitely, when-ever i2c transfer is initiated.

Ref:
	commit dd7dbf0eb090 ("i2c: ocores: refactor setup for polling")

The workaround / fix under OCORES_FLAG_BROKEN_IRQ is particularly for
FU540-COOO SoC.

The polling function identifies a SiFive device based on the device node
and enables the workaround.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/i2c/busses/i2c-ocores.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index b334fa2..4117f1a 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -35,6 +35,7 @@ struct ocores_i2c {
 	int iobase;
 	u32 reg_shift;
 	u32 reg_io_width;
+	unsigned long flags;
 	wait_queue_head_t wait;
 	struct i2c_adapter adap;
 	struct i2c_msg *msg;
@@ -84,6 +85,8 @@ struct ocores_i2c {
 #define TYPE_GRLIB		1
 #define TYPE_SIFIVE_REV0	2
 
+#define OCORES_FLAG_BROKEN_IRQ BIT(1) /* Broken IRQ for FU540-C000 SoC */
+
 static void oc_setreg_8(struct ocores_i2c *i2c, int reg, u8 value)
 {
 	iowrite8(value, i2c->base + (reg << i2c->reg_shift));
@@ -236,9 +239,12 @@ static irqreturn_t ocores_isr(int irq, void *dev_id)
 	struct ocores_i2c *i2c = dev_id;
 	u8 stat = oc_getreg(i2c, OCI2C_STATUS);
 
-	if (!(stat & OCI2C_STAT_IF))
+	if (i2c->flags & OCORES_FLAG_BROKEN_IRQ) {
+		if ((stat & OCI2C_STAT_IF) && !(stat & OCI2C_STAT_BUSY))
+			return IRQ_NONE;
+	} else if (!(stat & OCI2C_STAT_IF)) {
 		return IRQ_NONE;
-
+	}
 	ocores_process(i2c, stat);
 
 	return IRQ_HANDLED;
@@ -353,6 +359,11 @@ static void ocores_process_polling(struct ocores_i2c *i2c)
 		ret = ocores_isr(-1, i2c);
 		if (ret == IRQ_NONE)
 			break; /* all messages have been transferred */
+		else {
+			if (i2c->flags & OCORES_FLAG_BROKEN_IRQ)
+				if (i2c->state == STATE_DONE)
+					break;
+		}
 	}
 }
 
@@ -595,6 +606,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 {
 	struct ocores_i2c *i2c;
 	struct ocores_i2c_platform_data *pdata;
+	const struct of_device_id *match;
 	struct resource *res;
 	int irq;
 	int ret;
@@ -677,6 +689,14 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	if (irq == -ENXIO) {
 		ocores_algorithm.master_xfer = ocores_xfer_polling;
+
+		/*
+		 * Set in OCORES_FLAG_BROKEN_IRQ to enable workaround for
+		 * FU540-C000 SoC in polling mode.
+		 */
+		match = of_match_node(ocores_i2c_match, pdev->dev.of_node);
+		if (match && (long)match->data == TYPE_SIFIVE_REV0)
+			i2c->flags |= OCORES_FLAG_BROKEN_IRQ;
 	} else {
 		if (irq < 0)
 			return irq;
-- 
1.9.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-31 18:30 [PATCH REPOST v8 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode Sagar Shrikant Kadam
2019-05-31 18:30 ` [PATCH REPOST v8 1/3] dt-bindings: i2c: extend existing opencore bindings Sagar Shrikant Kadam
2019-05-31 18:30 ` [PATCH REPOST v8 2/3] i2c-ocores: sifive: add support for i2c device on FU540-c000 SoC Sagar Shrikant Kadam
2019-05-31 18:30 ` Sagar Shrikant Kadam [this message]
2019-05-31 18:52   ` [PATCH REPOST v8 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC Andrew Lunn
2019-06-01  6:11 [PATCH REPOST v8 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode Sagar Shrikant Kadam
2019-06-01  6:11 ` [PATCH REPOST v8 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC Sagar Shrikant Kadam
2019-06-14 20:58   ` Wolfram Sang

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1559327423-13001-4-git-send-email-sagar.kadam@sifive.com \
    --to=sagar.kadam@sifive.com \
    --cc=andrew@lunn.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=palmer@sifive.com \
    --cc=paul.walmsley@sifive.com \
    --cc=peter@korsgaard.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org infradead-linux-riscv@archiver.kernel.org
	public-inbox-index linux-riscv


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/ public-inbox