Linux-RISC-V Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/2] riscv: Correct the initialized flow of FP and __fstate_clean()
@ 2019-08-14  8:23 Vincent Chen
  2019-08-14  8:23 ` [PATCH v2 1/2] riscv: Correct the initialized flow of FP register Vincent Chen
  2019-08-14  8:23 ` [PATCH v2 2/2] riscv: Make __fstate_clean() work correctly Vincent Chen
  0 siblings, 2 replies; 9+ messages in thread
From: Vincent Chen @ 2019-08-14  8:23 UTC (permalink / raw)
  To: Paul Walmsley, Palmer Dabbelt; +Cc: Vincent Chen, linux-riscv, linux-kernel

The following two reasons cause FP registers are sometimes not
initialized before starting the user program.
1. Currently, the FP context is initialized in flush_thread() function
   and we expect these initial values to be restored to FP register when
   doing FP context switch. However, the FP context switch only occurs in
   switch_to function. Hence, if this process does not be scheduled out
   and scheduled in before entering the user space, the FP registers
   have no chance to initialize.
2. In flush_thread(), the state of reg->sstatus.FS inherits from the
   parent. Hence, the state of reg->sstatus.FS may be dirty. If this
   process is scheduled out during flush_thread() and initializing the
   FP register, the fstate_save() in switch_to will corrupt the FP context
   which has been initialized until flush_thread().
In addition, the __fstate_clean() function cannot correctly set the state
of sstatus.FS to SR_FS_CLEAN. These problems will be solved in this patch
set.

Changes since v1:
- Remove unneeded braces
- Remove unneeded ifdef condition
- Make the correction for __fstate_clean() be a RC fix

Vincent Chen (2):
  riscv: Correct the initialized flow of FP register
  riscv: Make __fstate_clean() work correctly.

 arch/riscv/include/asm/switch_to.h |  8 +++++++-
 arch/riscv/kernel/process.c        | 11 +++++++++--
 2 files changed, 16 insertions(+), 3 deletions(-)

-- 
2.7.4

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v2 1/2] riscv: Correct the initialized flow of FP register
  2019-08-14  8:23 [PATCH v2 0/2] riscv: Correct the initialized flow of FP and __fstate_clean() Vincent Chen
@ 2019-08-14  8:23 ` Vincent Chen
  2019-08-14 20:24   ` Paul Walmsley
  2019-08-14  8:23 ` [PATCH v2 2/2] riscv: Make __fstate_clean() work correctly Vincent Chen
  1 sibling, 1 reply; 9+ messages in thread
From: Vincent Chen @ 2019-08-14  8:23 UTC (permalink / raw)
  To: Paul Walmsley, Palmer Dabbelt; +Cc: Vincent Chen, linux-riscv, linux-kernel

  The following two reasons cause FP registers are sometimes not
initialized before starting the user program.
1. Currently, the FP context is initialized in flush_thread() function
   and we expect these initial values to be restored to FP register when
   doing FP context switch. However, the FP context switch only occurs in
   switch_to function. Hence, if this process does not be scheduled out
   and scheduled in before entering the user space, the FP registers
   have no chance to initialize.
2. In flush_thread(), the state of reg->sstatus.FS inherits from the
   parent. Hence, the state of reg->sstatus.FS may be dirty. If this
   process is scheduled out during flush_thread() and initializing the
   FP register, the fstate_save() in switch_to will corrupt the FP context
   which has been initialized until flush_thread().

  To solve the 1st case, the initialization of the FP register will be
completed in start_thread(). It makes sure all FP registers are initialized
before starting the user program. For the 2nd case, the state of
reg->sstatus.FS in start_thread will be set to SR_FS_OFF to prevent this
process from corrupting FP context in doing context save. The FP state is
set to SR_FS_INITIAL in start_trhead().

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

---
 arch/riscv/include/asm/switch_to.h |  6 ++++++
 arch/riscv/kernel/process.c        | 11 +++++++++--
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/include/asm/switch_to.h b/arch/riscv/include/asm/switch_to.h
index 853b65e..0575b8a 100644
--- a/arch/riscv/include/asm/switch_to.h
+++ b/arch/riscv/include/asm/switch_to.h
@@ -19,6 +19,12 @@ static inline void __fstate_clean(struct pt_regs *regs)
 	regs->sstatus |= (regs->sstatus & ~(SR_FS)) | SR_FS_CLEAN;
 }
 
+static inline void fstate_off(struct task_struct *task,
+			       struct pt_regs *regs)
+{
+	regs->sstatus = (regs->sstatus & ~SR_FS) | SR_FS_OFF;
+}
+
 static inline void fstate_save(struct task_struct *task,
 			       struct pt_regs *regs)
 {
diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
index f23794b..fb3a082 100644
--- a/arch/riscv/kernel/process.c
+++ b/arch/riscv/kernel/process.c
@@ -64,8 +64,14 @@ void start_thread(struct pt_regs *regs, unsigned long pc,
 	unsigned long sp)
 {
 	regs->sstatus = SR_SPIE;
-	if (has_fpu)
+	if (has_fpu) {
 		regs->sstatus |= SR_FS_INITIAL;
+		/*
+		 * Restore the initial value to the FP register
+		 * before starting the user program.
+		 */
+		fstate_restore(current, regs);
+	}
 	regs->sepc = pc;
 	regs->sp = sp;
 	set_fs(USER_DS);
@@ -75,10 +81,11 @@ void flush_thread(void)
 {
 #ifdef CONFIG_FPU
 	/*
-	 * Reset FPU context
+	 * Reset FPU state and context
 	 *	frm: round to nearest, ties to even (IEEE default)
 	 *	fflags: accrued exceptions cleared
 	 */
+	fstate_off(current, task_pt_regs(current));
 	memset(&current->thread.fstate, 0, sizeof(current->thread.fstate));
 #endif
 }
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v2 2/2] riscv: Make __fstate_clean() work correctly.
  2019-08-14  8:23 [PATCH v2 0/2] riscv: Correct the initialized flow of FP and __fstate_clean() Vincent Chen
  2019-08-14  8:23 ` [PATCH v2 1/2] riscv: Correct the initialized flow of FP register Vincent Chen
@ 2019-08-14  8:23 ` Vincent Chen
  2019-08-14 20:32   ` Paul Walmsley
  1 sibling, 1 reply; 9+ messages in thread
From: Vincent Chen @ 2019-08-14  8:23 UTC (permalink / raw)
  To: Paul Walmsley, Palmer Dabbelt
  Cc: Vincent Chen, linux-riscv, linux-kernel, linux-stable

Make the __fstate_clean() function correctly set the
state of sstatus.FS in pt_regs to SR_FS_CLEAN.

Fixes: 7db91e5 ("RISC-V: Task implementation")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

---
 arch/riscv/include/asm/switch_to.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/switch_to.h b/arch/riscv/include/asm/switch_to.h
index 0575b8a..0aa5b94 100644
--- a/arch/riscv/include/asm/switch_to.h
+++ b/arch/riscv/include/asm/switch_to.h
@@ -16,7 +16,7 @@ extern void __fstate_restore(struct task_struct *restore_from);
 
 static inline void __fstate_clean(struct pt_regs *regs)
 {
-	regs->sstatus |= (regs->sstatus & ~(SR_FS)) | SR_FS_CLEAN;
+	regs->sstatus = (regs->sstatus & ~SR_FS) | SR_FS_CLEAN;
 }
 
 static inline void fstate_off(struct task_struct *task,
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v2 1/2] riscv: Correct the initialized flow of FP register
  2019-08-14  8:23 ` [PATCH v2 1/2] riscv: Correct the initialized flow of FP register Vincent Chen
@ 2019-08-14 20:24   ` Paul Walmsley
  0 siblings, 0 replies; 9+ messages in thread
From: Paul Walmsley @ 2019-08-14 20:24 UTC (permalink / raw)
  To: Vincent Chen; +Cc: linux-riscv, Palmer Dabbelt, linux-kernel

On Wed, 14 Aug 2019, Vincent Chen wrote:

>   The following two reasons cause FP registers are sometimes not
> initialized before starting the user program.
> 1. Currently, the FP context is initialized in flush_thread() function
>    and we expect these initial values to be restored to FP register when
>    doing FP context switch. However, the FP context switch only occurs in
>    switch_to function. Hence, if this process does not be scheduled out
>    and scheduled in before entering the user space, the FP registers
>    have no chance to initialize.
> 2. In flush_thread(), the state of reg->sstatus.FS inherits from the
>    parent. Hence, the state of reg->sstatus.FS may be dirty. If this
>    process is scheduled out during flush_thread() and initializing the
>    FP register, the fstate_save() in switch_to will corrupt the FP context
>    which has been initialized until flush_thread().
> 
>   To solve the 1st case, the initialization of the FP register will be
> completed in start_thread(). It makes sure all FP registers are initialized
> before starting the user program. For the 2nd case, the state of
> reg->sstatus.FS in start_thread will be set to SR_FS_OFF to prevent this
> process from corrupting FP context in doing context save. The FP state is
> set to SR_FS_INITIAL in start_trhead().
> 
> Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
> Reviewed-by: Anup Patel <anup@brainfault.org>
> Reviewed-by: Christoph Hellwig <hch@lst.de>

Thanks Vincent.  I fixed a 'checkpatch.pl --strict' issue, added a 
"Fixes:" line and cc'ed stable, and queued the following for v5.3-rc.


- Paul


From: Vincent Chen <vincent.chen@sifive.com>
Date: Wed, 14 Aug 2019 16:23:52 +0800
Subject: [PATCH] riscv: Correct the initialized flow of FP register

  The following two reasons cause FP registers are sometimes not
initialized before starting the user program.
1. Currently, the FP context is initialized in flush_thread() function
   and we expect these initial values to be restored to FP register when
   doing FP context switch. However, the FP context switch only occurs in
   switch_to function. Hence, if this process does not be scheduled out
   and scheduled in before entering the user space, the FP registers
   have no chance to initialize.
2. In flush_thread(), the state of reg->sstatus.FS inherits from the
   parent. Hence, the state of reg->sstatus.FS may be dirty. If this
   process is scheduled out during flush_thread() and initializing the
   FP register, the fstate_save() in switch_to will corrupt the FP context
   which has been initialized until flush_thread().

  To solve the 1st case, the initialization of the FP register will be
completed in start_thread(). It makes sure all FP registers are initialized
before starting the user program. For the 2nd case, the state of
reg->sstatus.FS in start_thread will be set to SR_FS_OFF to prevent this
process from corrupting FP context in doing context save. The FP state is
set to SR_FS_INITIAL in start_trhead().

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 7db91e57a0acd ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
[paul.walmsley@sifive.com: fixed brace alignment issue reported by
 checkpatch]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
---
 arch/riscv/include/asm/switch_to.h |  6 ++++++
 arch/riscv/kernel/process.c        | 11 +++++++++--
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/include/asm/switch_to.h b/arch/riscv/include/asm/switch_to.h
index 853b65ef656d..949d9cd91dec 100644
--- a/arch/riscv/include/asm/switch_to.h
+++ b/arch/riscv/include/asm/switch_to.h
@@ -19,6 +19,12 @@ static inline void __fstate_clean(struct pt_regs *regs)
 	regs->sstatus |= (regs->sstatus & ~(SR_FS)) | SR_FS_CLEAN;
 }
 
+static inline void fstate_off(struct task_struct *task,
+			      struct pt_regs *regs)
+{
+	regs->sstatus = (regs->sstatus & ~SR_FS) | SR_FS_OFF;
+}
+
 static inline void fstate_save(struct task_struct *task,
 			       struct pt_regs *regs)
 {
diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
index f23794bd1e90..fb3a082362eb 100644
--- a/arch/riscv/kernel/process.c
+++ b/arch/riscv/kernel/process.c
@@ -64,8 +64,14 @@ void start_thread(struct pt_regs *regs, unsigned long pc,
 	unsigned long sp)
 {
 	regs->sstatus = SR_SPIE;
-	if (has_fpu)
+	if (has_fpu) {
 		regs->sstatus |= SR_FS_INITIAL;
+		/*
+		 * Restore the initial value to the FP register
+		 * before starting the user program.
+		 */
+		fstate_restore(current, regs);
+	}
 	regs->sepc = pc;
 	regs->sp = sp;
 	set_fs(USER_DS);
@@ -75,10 +81,11 @@ void flush_thread(void)
 {
 #ifdef CONFIG_FPU
 	/*
-	 * Reset FPU context
+	 * Reset FPU state and context
 	 *	frm: round to nearest, ties to even (IEEE default)
 	 *	fflags: accrued exceptions cleared
 	 */
+	fstate_off(current, task_pt_regs(current));
 	memset(&current->thread.fstate, 0, sizeof(current->thread.fstate));
 #endif
 }
-- 
2.23.0.rc1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v2 2/2] riscv: Make __fstate_clean() work correctly.
  2019-08-14  8:23 ` [PATCH v2 2/2] riscv: Make __fstate_clean() work correctly Vincent Chen
@ 2019-08-14 20:32   ` Paul Walmsley
  2019-08-14 21:29     ` Palmer Dabbelt
  0 siblings, 1 reply; 9+ messages in thread
From: Paul Walmsley @ 2019-08-14 20:32 UTC (permalink / raw)
  To: Vincent Chen; +Cc: linux-riscv, Palmer Dabbelt, linux-kernel

On Wed, 14 Aug 2019, Vincent Chen wrote:

> Make the __fstate_clean() function correctly set the
> state of sstatus.FS in pt_regs to SR_FS_CLEAN.
> 
> Fixes: 7db91e5 ("RISC-V: Task implementation")
> Cc: linux-stable <stable@vger.kernel.org>
> Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
> Reviewed-by: Anup Patel <anup@brainfault.org>
> Reviewed-by: Christoph Hellwig <hch@lst.de>

Thanks, I extended the "Fixes" commit ID to 12 digits, as is the usual 
practice here, and have queued the following for v5.3-rc.


- Paul

From: Vincent Chen <vincent.chen@sifive.com>
Date: Wed, 14 Aug 2019 16:23:53 +0800
Subject: [PATCH] riscv: Make __fstate_clean() work correctly.

Make the __fstate_clean() function correctly set the
state of sstatus.FS in pt_regs to SR_FS_CLEAN.

Fixes: 7db91e57a0acd ("RISC-V: Task implementation")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: expanded "Fixes" commit ID]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
---
 arch/riscv/include/asm/switch_to.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/switch_to.h b/arch/riscv/include/asm/switch_to.h
index 949d9cd91dec..f0227bdce0f0 100644
--- a/arch/riscv/include/asm/switch_to.h
+++ b/arch/riscv/include/asm/switch_to.h
@@ -16,7 +16,7 @@ extern void __fstate_restore(struct task_struct *restore_from);
 
 static inline void __fstate_clean(struct pt_regs *regs)
 {
-	regs->sstatus |= (regs->sstatus & ~(SR_FS)) | SR_FS_CLEAN;
+	regs->sstatus = (regs->sstatus & ~SR_FS) | SR_FS_CLEAN;
 }
 
 static inline void fstate_off(struct task_struct *task,
-- 
2.23.0.rc1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v2 2/2] riscv: Make __fstate_clean() work correctly.
  2019-08-14 20:32   ` Paul Walmsley
@ 2019-08-14 21:29     ` Palmer Dabbelt
  2019-08-14 22:17       ` Andreas Schwab
  0 siblings, 1 reply; 9+ messages in thread
From: Palmer Dabbelt @ 2019-08-14 21:29 UTC (permalink / raw)
  To: Paul Walmsley; +Cc: vincent.chen, linux-riscv, linux-kernel

On Wed, 14 Aug 2019 13:32:50 PDT (-0700), Paul Walmsley wrote:
> On Wed, 14 Aug 2019, Vincent Chen wrote:
>
>> Make the __fstate_clean() function correctly set the
>> state of sstatus.FS in pt_regs to SR_FS_CLEAN.
>>
>> Fixes: 7db91e5 ("RISC-V: Task implementation")
>> Cc: linux-stable <stable@vger.kernel.org>
>> Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
>> Reviewed-by: Anup Patel <anup@brainfault.org>
>> Reviewed-by: Christoph Hellwig <hch@lst.de>
>
> Thanks, I extended the "Fixes" commit ID to 12 digits, as is the usual
> practice here, and have queued the following for v5.3-rc.

For reference, something like "git config core.abbrev=12" (or whatever you 
write to get this in your .gitconfig)

    https://github.com/palmer-dabbelt/home/blob/master/.gitconfig.in#L23

causes git to do the right thing.

> - Paul
>
> From: Vincent Chen <vincent.chen@sifive.com>
> Date: Wed, 14 Aug 2019 16:23:53 +0800
> Subject: [PATCH] riscv: Make __fstate_clean() work correctly.
>
> Make the __fstate_clean() function correctly set the
> state of sstatus.FS in pt_regs to SR_FS_CLEAN.
>
> Fixes: 7db91e57a0acd ("RISC-V: Task implementation")
> Cc: linux-stable <stable@vger.kernel.org>
> Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
> Reviewed-by: Anup Patel <anup@brainfault.org>
> Reviewed-by: Christoph Hellwig <hch@lst.de>
> [paul.walmsley@sifive.com: expanded "Fixes" commit ID]
> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
> ---
>  arch/riscv/include/asm/switch_to.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/riscv/include/asm/switch_to.h b/arch/riscv/include/asm/switch_to.h
> index 949d9cd91dec..f0227bdce0f0 100644
> --- a/arch/riscv/include/asm/switch_to.h
> +++ b/arch/riscv/include/asm/switch_to.h
> @@ -16,7 +16,7 @@ extern void __fstate_restore(struct task_struct *restore_from);
>
>  static inline void __fstate_clean(struct pt_regs *regs)
>  {
> -	regs->sstatus |= (regs->sstatus & ~(SR_FS)) | SR_FS_CLEAN;
> +	regs->sstatus = (regs->sstatus & ~SR_FS) | SR_FS_CLEAN;
>  }
>
>  static inline void fstate_off(struct task_struct *task,

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v2 2/2] riscv: Make __fstate_clean() work correctly.
  2019-08-14 21:29     ` Palmer Dabbelt
@ 2019-08-14 22:17       ` Andreas Schwab
  2019-08-15  1:53         ` Palmer Dabbelt
  2019-08-15  2:53         ` Vincent Chen
  0 siblings, 2 replies; 9+ messages in thread
From: Andreas Schwab @ 2019-08-14 22:17 UTC (permalink / raw)
  To: Palmer Dabbelt; +Cc: vincent.chen, linux-riscv, linux-kernel, Paul Walmsley

On Aug 14 2019, Palmer Dabbelt <palmer@sifive.com> wrote:

> On Wed, 14 Aug 2019 13:32:50 PDT (-0700), Paul Walmsley wrote:
>> On Wed, 14 Aug 2019, Vincent Chen wrote:
>>
>>> Make the __fstate_clean() function correctly set the
>>> state of sstatus.FS in pt_regs to SR_FS_CLEAN.
>>>
>>> Fixes: 7db91e5 ("RISC-V: Task implementation")
>>> Cc: linux-stable <stable@vger.kernel.org>
>>> Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
>>> Reviewed-by: Anup Patel <anup@brainfault.org>
>>> Reviewed-by: Christoph Hellwig <hch@lst.de>
>>
>> Thanks, I extended the "Fixes" commit ID to 12 digits, as is the usual
>> practice here, and have queued the following for v5.3-rc.
>
> For reference, something like "git config core.abbrev=12" (or whatever you
> write to get this in your .gitconfig)
>
>    https://github.com/palmer-dabbelt/home/blob/master/.gitconfig.in#L23
>
> causes git to do the right thing.

Actually, the right setting is core.abbrev=auto (or leaving it unset).
It lets git chose the appropriate length depending on the repository
contents.  For the linux repository it will chose 13 right now.

Andreas.

-- 
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510  2552 DF73 E780 A9DA AEC1
"And now for something completely different."

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v2 2/2] riscv: Make __fstate_clean() work correctly.
  2019-08-14 22:17       ` Andreas Schwab
@ 2019-08-15  1:53         ` Palmer Dabbelt
  2019-08-15  2:53         ` Vincent Chen
  1 sibling, 0 replies; 9+ messages in thread
From: Palmer Dabbelt @ 2019-08-15  1:53 UTC (permalink / raw)
  To: schwab; +Cc: vincent.chen, linux-riscv, linux-kernel, Paul Walmsley

On Wed, 14 Aug 2019 15:17:18 PDT (-0700), schwab@linux-m68k.org wrote:
> On Aug 14 2019, Palmer Dabbelt <palmer@sifive.com> wrote:
>
>> On Wed, 14 Aug 2019 13:32:50 PDT (-0700), Paul Walmsley wrote:
>>> On Wed, 14 Aug 2019, Vincent Chen wrote:
>>>
>>>> Make the __fstate_clean() function correctly set the
>>>> state of sstatus.FS in pt_regs to SR_FS_CLEAN.
>>>>
>>>> Fixes: 7db91e5 ("RISC-V: Task implementation")
>>>> Cc: linux-stable <stable@vger.kernel.org>
>>>> Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
>>>> Reviewed-by: Anup Patel <anup@brainfault.org>
>>>> Reviewed-by: Christoph Hellwig <hch@lst.de>
>>>
>>> Thanks, I extended the "Fixes" commit ID to 12 digits, as is the usual
>>> practice here, and have queued the following for v5.3-rc.
>>
>> For reference, something like "git config core.abbrev=12" (or whatever you
>> write to get this in your .gitconfig)
>>
>>    https://github.com/palmer-dabbelt/home/blob/master/.gitconfig.in#L23
>>
>> causes git to do the right thing.
>
> Actually, the right setting is core.abbrev=auto (or leaving it unset).
> It lets git chose the appropriate length depending on the repository
> contents.  For the linux repository it will chose 13 right now.

Awesome, thanks!  I've updated my config :)

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v2 2/2] riscv: Make __fstate_clean() work correctly.
  2019-08-14 22:17       ` Andreas Schwab
  2019-08-15  1:53         ` Palmer Dabbelt
@ 2019-08-15  2:53         ` Vincent Chen
  1 sibling, 0 replies; 9+ messages in thread
From: Vincent Chen @ 2019-08-15  2:53 UTC (permalink / raw)
  To: Andreas Schwab
  Cc: linux-riscv, Palmer Dabbelt, linux-kernel@vger.kernel.org List,
	Paul Walmsley

On Thu, Aug 15, 2019 at 6:17 AM Andreas Schwab <schwab@linux-m68k.org> wrote:
>
> On Aug 14 2019, Palmer Dabbelt <palmer@sifive.com> wrote:
>
> > On Wed, 14 Aug 2019 13:32:50 PDT (-0700), Paul Walmsley wrote:
> >> On Wed, 14 Aug 2019, Vincent Chen wrote:
> >>
> >>> Make the __fstate_clean() function correctly set the
> >>> state of sstatus.FS in pt_regs to SR_FS_CLEAN.
> >>>
> >>> Fixes: 7db91e5 ("RISC-V: Task implementation")
> >>> Cc: linux-stable <stable@vger.kernel.org>
> >>> Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
> >>> Reviewed-by: Anup Patel <anup@brainfault.org>
> >>> Reviewed-by: Christoph Hellwig <hch@lst.de>
> >>
> >> Thanks, I extended the "Fixes" commit ID to 12 digits, as is the usual
> >> practice here, and have queued the following for v5.3-rc.
> >
Thank Paul for correcting my mistake.

> > For reference, something like "git config core.abbrev=12" (or whatever you
> > write to get this in your .gitconfig)
> >
> >    https://github.com/palmer-dabbelt/home/blob/master/.gitconfig.in#L23
> >
> > causes git to do the right thing.
>
> Actually, the right setting is core.abbrev=auto (or leaving it unset).
> It lets git chose the appropriate length depending on the repository
> contents.  For the linux repository it will chose 13 right now.
>
> Andreas.
>
Thanks to Palmer and Andreas for sharing this useful information.

> --
> Andreas Schwab, schwab@linux-m68k.org
> GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510  2552 DF73 E780 A9DA AEC1
> "And now for something completely different."

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-14  8:23 [PATCH v2 0/2] riscv: Correct the initialized flow of FP and __fstate_clean() Vincent Chen
2019-08-14  8:23 ` [PATCH v2 1/2] riscv: Correct the initialized flow of FP register Vincent Chen
2019-08-14 20:24   ` Paul Walmsley
2019-08-14  8:23 ` [PATCH v2 2/2] riscv: Make __fstate_clean() work correctly Vincent Chen
2019-08-14 20:32   ` Paul Walmsley
2019-08-14 21:29     ` Palmer Dabbelt
2019-08-14 22:17       ` Andreas Schwab
2019-08-15  1:53         ` Palmer Dabbelt
2019-08-15  2:53         ` Vincent Chen

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org infradead-linux-riscv@archiver.kernel.org
	public-inbox-index linux-riscv


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/ public-inbox