Linux-RISC-V Archive on lore.kernel.org
 help / Atom feed
* [PATCH v4] RISC-V: Update Kconfig to better handle CMDLINE
@ 2018-11-19 21:04 palmer
  2018-11-19 21:04 ` Palmer Dabbelt
  0 siblings, 1 reply; 2+ messages in thread
From: palmer @ 2018-11-19 21:04 UTC (permalink / raw)
  To: linux-riscv

From: Nick Kossifidis <mick@ics.forth.gr>

Added a menu to choose how the built-in command line will be
used and CMDLINE_EXTEND for compatibility with FDT code.

v2: Improved help messages, removed references to bootloader
and made them more descriptive. I also asked help from a
friend who's a language expert just in case.

v3: This time used the corrected text

v4: Copy the config strings from the arm32 port.

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Debbie Maliotaki <dmaliotaki@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 arch/riscv/Kconfig | 57 +++++++++++++++++++++++++++-------------------
 1 file changed, 33 insertions(+), 24 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 55da93f4e818..808624f6b906 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -227,39 +227,48 @@ endmenu
 
 menu "Boot options"
 
-config CMDLINE_BOOL
-	bool "Built-in kernel command line"
+config CMDLINE
+	string "Built-in kernel command line"
 	help
-	  For most platforms, it is firmware or second stage bootloader
-	  that by default specifies the kernel command line options.
-	  However, it might be necessary or advantageous to either override
-	  the default kernel command line or add a few extra options to it.
-	  For such cases, this option allows hardcoding command line options
-	  directly into the kernel.
+	  For most platforms, the arguments for the kernel's command line
+	  are provided at run-time, during boot. However, there are cases
+	  where either no arguments are being provided or the provided
+	  arguments are insufficient or even invalid.
 
-	  For that, choose 'Y' here and fill in the extra boot parameters
-	  in CONFIG_CMDLINE.
+	  When that occurs, it is possible to define a built-in command
+	  line here and choose how the kernel should use it later on.
 
-	  The built-in options will be concatenated to the default command
-	  line if CMDLINE_FORCE is set to 'N'. Otherwise, the default
-	  command line will be ignored and replaced by the built-in string.
+choice
+	prompt "Built-in command line usage" if CMDLINE != ""
+	default CMDLINE_FALLBACK
+	help
+	  Choose how the kernel will handle the provided built-in command
+	  line.
 
-config CMDLINE
-	string "Built-in kernel command string"
-	depends on CMDLINE_BOOL
-	default ""
+config CMDLINE_FALLBACK
+	bool "Fallback"
 	help
-	  Supply command-line options at build time by entering them here.
+	  Use the built-in command line as fallback in case we get nothing
+	  during boot. This is the default behaviour.
+
+config CMDLINE_EXTEND
+	bool "Extension"
+	help
+	  The command-line arguments provided during boot will be
+	  appended to the built-in command line. This is useful in
+	  cases where the provided arguments are insufficient and
+	  you don't want to or cannot modify them.
+
 
 config CMDLINE_FORCE
-	bool "Built-in command line overrides bootloader arguments"
-	depends on CMDLINE_BOOL
+	bool "Forced"
 	help
-	  Set this option to 'Y' to have the kernel ignore the bootloader
-	  or firmware command line.  Instead, the built-in command line
-	  will be used exclusively.
+	  Always use the built-in command line, even if we get one during
+	  boot. This is useful in case you need to override the provided
+	  command line on systems where you don't have or want control
+	  over it.
 
-	  If you don't know what to do here, say N.
+endchoice
 
 endmenu
 
-- 
2.18.1

^ permalink raw reply	[flat|nested] 2+ messages in thread

* [PATCH v4] RISC-V: Update Kconfig to better handle CMDLINE
  2018-11-19 21:04 [PATCH v4] RISC-V: Update Kconfig to better handle CMDLINE palmer
@ 2018-11-19 21:04 ` Palmer Dabbelt
  0 siblings, 0 replies; 2+ messages in thread
From: Palmer Dabbelt @ 2018-11-19 21:04 UTC (permalink / raw)
  To: mick, dmaliotaki; +Cc: linux-riscv, Palmer Dabbelt

From: Nick Kossifidis <mick@ics.forth.gr>

Added a menu to choose how the built-in command line will be
used and CMDLINE_EXTEND for compatibility with FDT code.

v2: Improved help messages, removed references to bootloader
and made them more descriptive. I also asked help from a
friend who's a language expert just in case.

v3: This time used the corrected text

v4: Copy the config strings from the arm32 port.

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Debbie Maliotaki <dmaliotaki@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 arch/riscv/Kconfig | 57 +++++++++++++++++++++++++++-------------------
 1 file changed, 33 insertions(+), 24 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 55da93f4e818..808624f6b906 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -227,39 +227,48 @@ endmenu
 
 menu "Boot options"
 
-config CMDLINE_BOOL
-	bool "Built-in kernel command line"
+config CMDLINE
+	string "Built-in kernel command line"
 	help
-	  For most platforms, it is firmware or second stage bootloader
-	  that by default specifies the kernel command line options.
-	  However, it might be necessary or advantageous to either override
-	  the default kernel command line or add a few extra options to it.
-	  For such cases, this option allows hardcoding command line options
-	  directly into the kernel.
+	  For most platforms, the arguments for the kernel's command line
+	  are provided at run-time, during boot. However, there are cases
+	  where either no arguments are being provided or the provided
+	  arguments are insufficient or even invalid.
 
-	  For that, choose 'Y' here and fill in the extra boot parameters
-	  in CONFIG_CMDLINE.
+	  When that occurs, it is possible to define a built-in command
+	  line here and choose how the kernel should use it later on.
 
-	  The built-in options will be concatenated to the default command
-	  line if CMDLINE_FORCE is set to 'N'. Otherwise, the default
-	  command line will be ignored and replaced by the built-in string.
+choice
+	prompt "Built-in command line usage" if CMDLINE != ""
+	default CMDLINE_FALLBACK
+	help
+	  Choose how the kernel will handle the provided built-in command
+	  line.
 
-config CMDLINE
-	string "Built-in kernel command string"
-	depends on CMDLINE_BOOL
-	default ""
+config CMDLINE_FALLBACK
+	bool "Fallback"
 	help
-	  Supply command-line options at build time by entering them here.
+	  Use the built-in command line as fallback in case we get nothing
+	  during boot. This is the default behaviour.
+
+config CMDLINE_EXTEND
+	bool "Extension"
+	help
+	  The command-line arguments provided during boot will be
+	  appended to the built-in command line. This is useful in
+	  cases where the provided arguments are insufficient and
+	  you don't want to or cannot modify them.
+
 
 config CMDLINE_FORCE
-	bool "Built-in command line overrides bootloader arguments"
-	depends on CMDLINE_BOOL
+	bool "Forced"
 	help
-	  Set this option to 'Y' to have the kernel ignore the bootloader
-	  or firmware command line.  Instead, the built-in command line
-	  will be used exclusively.
+	  Always use the built-in command line, even if we get one during
+	  boot. This is useful in case you need to override the provided
+	  command line on systems where you don't have or want control
+	  over it.
 
-	  If you don't know what to do here, say N.
+endchoice
 
 endmenu
 
-- 
2.18.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-19 21:04 [PATCH v4] RISC-V: Update Kconfig to better handle CMDLINE palmer
2018-11-19 21:04 ` Palmer Dabbelt

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org infradead-linux-riscv@archiver.kernel.org
	public-inbox-index linux-riscv


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/ public-inbox