Linux-RISC-V Archive on lore.kernel.org
 help / Atom feed
WARNING: multiple messages refer to this Message-ID
From: anup@brainfault.org (Anup Patel)
To: linux-riscv@lists.infradead.org
Subject: [PATCH v2 3/4] irqchip: sifive-plic: Differentiate between PLIC handler and context
Date: Tue, 27 Nov 2018 15:33:16 +0530
Message-ID: <20181127100317.12809-4-anup@brainfault.org> (raw)
In-Reply-To: <20181127100317.12809-1-anup@brainfault.org>

We explicitly differentiate between PLIC handler and context because
PLIC context is for given mode of HART whereas PLIC handler is per-CPU
software construct meant for handling interrupts from a particular
PLIC context.

Signed-off-by: Anup Patel <anup@brainfault.org>
---
 drivers/irqchip/irq-sifive-plic.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 95b4b92ca9b8..ffd4deaca057 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -66,8 +66,8 @@ static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
 
 struct plic_hw {
 	u32			nr_irqs;
+	u32			nr_contexts;
 	u32			nr_handlers;
-	u32			nr_mapped;
 	void __iomem		*regs;
 	struct irq_domain	*irqdomain;
 };
@@ -191,10 +191,10 @@ static int __init plic_init(struct device_node *node,
 	if (WARN_ON(!plic.nr_irqs))
 		goto out_iounmap;
 
-	plic.nr_handlers = of_irq_count(node);
-	if (WARN_ON(!plic.nr_handlers))
+	plic.nr_contexts = of_irq_count(node);
+	if (WARN_ON(!plic.nr_contexts))
 		goto out_iounmap;
-	if (WARN_ON(plic.nr_handlers < num_possible_cpus()))
+	if (WARN_ON(plic.nr_contexts < num_possible_cpus()))
 		goto out_iounmap;
 
 	plic.irqdomain = irq_domain_add_linear(node, plic.nr_irqs + 1,
@@ -202,7 +202,7 @@ static int __init plic_init(struct device_node *node,
 	if (WARN_ON(!plic.irqdomain))
 		goto out_iounmap;
 
-	for (i = 0; i < plic.nr_handlers; i++) {
+	for (i = 0; i < plic.nr_contexts; i++) {
 		struct of_phandle_args parent;
 		struct plic_handler *handler;
 		irq_hw_number_t hwirq;
@@ -225,6 +225,11 @@ static int __init plic_init(struct device_node *node,
 
 		cpu = riscv_hartid_to_cpuid(hartid);
 		handler = per_cpu_ptr(&plic_handlers, cpu);
+		if (handler->present) {
+			pr_warn("handler not available for context %d.\n", i);
+			continue;
+		}
+
 		handler->present = true;
 		handler->hart_base =
 			plic.regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
@@ -237,11 +242,11 @@ static int __init plic_init(struct device_node *node,
 		for (hwirq = 1; hwirq <= plic.nr_irqs; hwirq++)
 			plic_toggle(handler, hwirq, 0);
 
-		plic.nr_mapped++;
+		plic.nr_handlers++;
 	}
 
-	pr_info("mapped %d interrupts to %d (out of %d) handlers.\n",
-		plic.nr_irqs, plic.nr_mapped, plic.nr_handlers);
+	pr_info("mapped %d interrupts with %d handlers for %d contexts.\n",
+		plic.nr_irqs, plic.nr_handlers, plic.nr_contexts);
 	set_handle_irq(plic_handle_irq);
 	return 0;
 
-- 
2.17.1

From: Anup Patel <anup@brainfault.org>
To: Palmer Dabbelt <palmer@sifive.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>,
	Atish Patra <atish.patra@wdc.com>,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	Anup Patel <anup@brainfault.org>
Subject: [PATCH v2 3/4] irqchip: sifive-plic: Differentiate between PLIC handler and context
Date: Tue, 27 Nov 2018 15:33:16 +0530
Message-ID: <20181127100317.12809-4-anup@brainfault.org> (raw)
Message-ID: <20181127100316.rgCYSZdywbLHRTj53yGQvZ3aHD-TQIAHImzE3hkR4jI@z> (raw)
In-Reply-To: <20181127100317.12809-1-anup@brainfault.org>

We explicitly differentiate between PLIC handler and context because
PLIC context is for given mode of HART whereas PLIC handler is per-CPU
software construct meant for handling interrupts from a particular
PLIC context.

Signed-off-by: Anup Patel <anup@brainfault.org>
---
 drivers/irqchip/irq-sifive-plic.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 95b4b92ca9b8..ffd4deaca057 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -66,8 +66,8 @@ static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
 
 struct plic_hw {
 	u32			nr_irqs;
+	u32			nr_contexts;
 	u32			nr_handlers;
-	u32			nr_mapped;
 	void __iomem		*regs;
 	struct irq_domain	*irqdomain;
 };
@@ -191,10 +191,10 @@ static int __init plic_init(struct device_node *node,
 	if (WARN_ON(!plic.nr_irqs))
 		goto out_iounmap;
 
-	plic.nr_handlers = of_irq_count(node);
-	if (WARN_ON(!plic.nr_handlers))
+	plic.nr_contexts = of_irq_count(node);
+	if (WARN_ON(!plic.nr_contexts))
 		goto out_iounmap;
-	if (WARN_ON(plic.nr_handlers < num_possible_cpus()))
+	if (WARN_ON(plic.nr_contexts < num_possible_cpus()))
 		goto out_iounmap;
 
 	plic.irqdomain = irq_domain_add_linear(node, plic.nr_irqs + 1,
@@ -202,7 +202,7 @@ static int __init plic_init(struct device_node *node,
 	if (WARN_ON(!plic.irqdomain))
 		goto out_iounmap;
 
-	for (i = 0; i < plic.nr_handlers; i++) {
+	for (i = 0; i < plic.nr_contexts; i++) {
 		struct of_phandle_args parent;
 		struct plic_handler *handler;
 		irq_hw_number_t hwirq;
@@ -225,6 +225,11 @@ static int __init plic_init(struct device_node *node,
 
 		cpu = riscv_hartid_to_cpuid(hartid);
 		handler = per_cpu_ptr(&plic_handlers, cpu);
+		if (handler->present) {
+			pr_warn("handler not available for context %d.\n", i);
+			continue;
+		}
+
 		handler->present = true;
 		handler->hart_base =
 			plic.regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
@@ -237,11 +242,11 @@ static int __init plic_init(struct device_node *node,
 		for (hwirq = 1; hwirq <= plic.nr_irqs; hwirq++)
 			plic_toggle(handler, hwirq, 0);
 
-		plic.nr_mapped++;
+		plic.nr_handlers++;
 	}
 
-	pr_info("mapped %d interrupts to %d (out of %d) handlers.\n",
-		plic.nr_irqs, plic.nr_mapped, plic.nr_handlers);
+	pr_info("mapped %d interrupts with %d handlers for %d contexts.\n",
+		plic.nr_irqs, plic.nr_handlers, plic.nr_contexts);
 	set_handle_irq(plic_handle_irq);
 	return 0;
 
-- 
2.17.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-27 10:03 [PATCH v2 0/4] IRQ affinity support in PLIC driver anup
2018-11-27 10:03 ` Anup Patel
2018-11-27 10:03 ` [PATCH v2 1/4] irqchip: sifive-plic: Pre-compute context hart base and enable base anup
2018-11-27 10:03   ` Anup Patel
2018-11-30  0:35   ` Atish Patra
2018-11-30  3:34     ` Anup Patel
2018-11-27 10:03 ` [PATCH v2 2/4] irqchip: sifive-plic: More flexible plic_irq_toggle() anup
2018-11-27 10:03   ` Anup Patel
2018-11-30  1:39   ` Atish Patra
2018-11-30  3:51     ` Anup Patel
2018-11-27 10:03 ` anup [this message]
2018-11-27 10:03   ` [PATCH v2 3/4] irqchip: sifive-plic: Differentiate between PLIC handler and context Anup Patel
2018-11-30  1:57   ` Atish Patra
2018-11-30  3:55     ` Anup Patel
2018-11-27 10:03 ` [PATCH v2 4/4] irqchip: sifive-plic: Implement irq_set_affinity() for SMP host anup
2018-11-27 10:03   ` Anup Patel
2018-11-30  5:59   ` Atish Patra
2018-11-30  7:51     ` Anup Patel
2018-11-30  7:54     ` Atish Patra

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181127100317.12809-4-anup@brainfault.org \
    --to=anup@brainfault.org \
    --cc=linux-riscv@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org infradead-linux-riscv@archiver.kernel.org
	public-inbox-index linux-riscv


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/ public-inbox