Linux-RISC-V Archive on lore.kernel.org
 help / color / Atom feed
From: Anup Patel <anup@brainfault.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>, Palmer Dabbelt <palmer@sifive.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: Rob Herring <robh@kernel.org>, Anup Patel <anup@brainfault.org>,
	linux-kernel@vger.kernel.org,
	Christoph Hellwig <hch@infradead.org>,
	Atish Patra <atish.patra@wdc.com>,
	linux-serial@vger.kernel.org, linux-riscv@lists.infradead.org
Subject: [PATCH 1/3] tty/serial: Add RISC-V SBI earlycon support
Date: Tue,  4 Dec 2018 19:25:05 +0530
Message-ID: <20181204135507.3706-2-anup@brainfault.org> (raw)
In-Reply-To: <20181204135507.3706-1-anup@brainfault.org>

In RISC-V, the M-mode runtime firmware provide SBI calls for
debug prints. This patch adds earlycon support using RISC-V
SBI console calls. To enable it, just pass "earlycon=sbi" in
kernel parameters.

Signed-off-by: Anup Patel <anup@brainfault.org>
---
 drivers/tty/serial/Kconfig              | 12 +++++++++++
 drivers/tty/serial/Makefile             |  1 +
 drivers/tty/serial/earlycon-riscv-sbi.c | 28 +++++++++++++++++++++++++
 3 files changed, 41 insertions(+)
 create mode 100644 drivers/tty/serial/earlycon-riscv-sbi.c

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 32886c304641..287bb41ac814 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -85,6 +85,18 @@ config SERIAL_EARLYCON_ARM_SEMIHOST
 	  with "earlycon=smh" on the kernel command line. The console is
 	  enabled when early_param is processed.
 
+config SERIAL_EARLYCON_RISCV_SBI
+	bool "Early console using RISC-V SBI"
+	depends on RISCV
+	select SERIAL_CORE
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+	help
+	  Support for early debug console using RISC-V SBI. This enables
+	  the console before standard serial driver is probed. This is enabled
+	  with "earlycon=sbi" on the kernel command line. The console is
+	  enabled when early_param is processed.
+
 config SERIAL_SB1250_DUART
 	tristate "BCM1xxx on-chip DUART serial support"
 	depends on SIBYTE_SB1xxx_SOC=y
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index daac675612df..3ce26ce08616 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SERIAL_CORE) += serial_core.o
 
 obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
 obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
+obj-$(CONFIG_SERIAL_EARLYCON_RISCV_SBI) += earlycon-riscv-sbi.o
 
 # These Sparc drivers have to appear before others such as 8250
 # which share ttySx minor node space.  Otherwise console device
diff --git a/drivers/tty/serial/earlycon-riscv-sbi.c b/drivers/tty/serial/earlycon-riscv-sbi.c
new file mode 100644
index 000000000000..e1a551aae336
--- /dev/null
+++ b/drivers/tty/serial/earlycon-riscv-sbi.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RISC-V SBI based earlycon
+ *
+ * Copyright (C) 2018 Anup Patel <anup@brainfault.org>
+ */
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <asm/sbi.h>
+
+static void sbi_console_write(struct console *con,
+			      const char *s, unsigned int n)
+{
+	int i;
+
+	for (i = 0; i < n; ++i)
+		sbi_console_putchar(s[i]);
+}
+
+static int __init early_sbi_setup(struct earlycon_device *device,
+				  const char *opt)
+{
+	device->con->write = sbi_console_write;
+	return 0;
+}
+EARLYCON_DECLARE(sbi, early_sbi_setup);
-- 
2.17.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-04 13:55 [PATCH 0/3] RISC-V SBI earlycon Anup Patel
2018-12-04 13:55 ` Anup Patel [this message]
2018-12-05  9:58   ` [PATCH 1/3] tty/serial: Add RISC-V SBI earlycon support Greg Kroah-Hartman
2018-12-07 18:45     ` Palmer Dabbelt
2018-12-07 18:30   ` Palmer Dabbelt
2019-01-10 14:07   ` [PATCH] tty/serial: emit CR before NL in RISC-V SBL console Andreas Schwab
2019-01-10 15:16     ` Anup Patel
2019-01-10 15:26       ` Andreas Schwab
2019-01-10 16:17         ` Anup Patel
2019-01-10 17:11           ` [PATCH] tty/serial: use uart_console_write in the RISC-V SBL early console Andreas Schwab
2019-01-11 11:13             ` Anup Patel
2019-01-23 23:58               ` Palmer Dabbelt
2019-01-15 13:59             ` Christoph Hellwig
2019-01-10 20:54           ` [PATCH] tty/serial: emit CR before NL in RISC-V SBL console Palmer Dabbelt
2018-12-04 13:55 ` [PATCH 2/3] RISC-V: defconfig: Enable RISC-V SBI earlycon support Anup Patel
2018-12-07 18:30   ` Palmer Dabbelt
2018-12-04 13:55 ` [PATCH 3/3] RISC-V: Remove EARLY_PRINTK support Anup Patel
2018-12-07 18:30   ` Palmer Dabbelt
2018-12-07 18:30 ` [PATCH 0/3] RISC-V SBI earlycon Palmer Dabbelt
2019-03-25 16:23 ` Andreas Schwab

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181204135507.3706-2-anup@brainfault.org \
    --to=anup@brainfault.org \
    --cc=aou@eecs.berkeley.edu \
    --cc=atish.patra@wdc.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hch@infradead.org \
    --cc=jslaby@suse.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=palmer@sifive.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org infradead-linux-riscv@archiver.kernel.org
	public-inbox-index linux-riscv


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/ public-inbox