From: Anup Patel <anup@brainfault.org>
To: Palmer Dabbelt <palmer@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <anup.patel@wdc.com>,
linux-kernel@vger.kernel.org,
Christoph Hellwig <hch@infradead.org>,
Atish Patra <atish.patra@wdc.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
linux-riscv@lists.infradead.org
Subject: [PATCH 4/5] RISC-V: Move setup_vm() to mm/init.c
Date: Mon, 7 Jan 2019 21:40:46 +0530 [thread overview]
Message-ID: <20190107161047.10516-5-anup@brainfault.org> (raw)
In-Reply-To: <20190107161047.10516-1-anup@brainfault.org>
From: Anup Patel <anup.patel@wdc.com>
The setup_vm() is responsible for setting up initial
page table hence should be placed in mm/init.c.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
arch/riscv/kernel/setup.c | 49 --------------------------------------
arch/riscv/mm/init.c | 50 +++++++++++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+), 49 deletions(-)
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 49a13b98e13f..e9c7f1a6db5a 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -102,55 +102,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
}
#endif /* CONFIG_BLK_DEV_INITRD */
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
-pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
-
-#ifndef __PAGETABLE_PMD_FOLDED
-#define NUM_SWAPPER_PMDS ((uintptr_t)-PAGE_OFFSET >> PGDIR_SHIFT)
-pmd_t swapper_pmd[PTRS_PER_PMD*((-PAGE_OFFSET)/PGDIR_SIZE)] __page_aligned_bss;
-pmd_t trampoline_pmd[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
-#endif
-
-asmlinkage void __init setup_vm(void)
-{
- extern char _start;
- uintptr_t i;
- uintptr_t pa = (uintptr_t) &_start;
- pgprot_t prot = __pgprot(pgprot_val(PAGE_KERNEL) | _PAGE_EXEC);
-
- va_pa_offset = PAGE_OFFSET - pa;
- pfn_base = PFN_DOWN(pa);
-
- /* Sanity check alignment and size */
- BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
- BUG_ON((pa % (PAGE_SIZE * PTRS_PER_PTE)) != 0);
-
-#ifndef __PAGETABLE_PMD_FOLDED
- trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
- pfn_pgd(PFN_DOWN((uintptr_t)trampoline_pmd),
- __pgprot(_PAGE_TABLE));
- trampoline_pmd[0] = pfn_pmd(PFN_DOWN(pa), prot);
-
- for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
- size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
- swapper_pg_dir[o] =
- pfn_pgd(PFN_DOWN((uintptr_t)swapper_pmd) + i,
- __pgprot(_PAGE_TABLE));
- }
- for (i = 0; i < ARRAY_SIZE(swapper_pmd); i++)
- swapper_pmd[i] = pfn_pmd(PFN_DOWN(pa + i * PMD_SIZE), prot);
-#else
- trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
- pfn_pgd(PFN_DOWN(pa), prot);
-
- for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
- size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
- swapper_pg_dir[o] =
- pfn_pgd(PFN_DOWN(pa + i * PGDIR_SIZE), prot);
- }
-#endif
-}
-
void __init parse_dtb(unsigned int hartid, void *dtb)
{
early_init_dt_scan(__va(dtb));
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index d0965979ee70..b487f76d6060 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -102,3 +102,53 @@ void __init setup_bootmem(void)
&memblock.memory, 0);
}
}
+
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
+pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define NUM_SWAPPER_PMDS ((uintptr_t)-PAGE_OFFSET >> PGDIR_SHIFT)
+pmd_t swapper_pmd[PTRS_PER_PMD*((-PAGE_OFFSET)/PGDIR_SIZE)] __page_aligned_bss;
+pmd_t trampoline_pmd[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+#endif
+
+asmlinkage void __init setup_vm(void)
+{
+ extern char _start;
+ size_t o;
+ uintptr_t i;
+ uintptr_t pa = (uintptr_t) &_start;
+ pgprot_t prot = __pgprot(pgprot_val(PAGE_KERNEL) | _PAGE_EXEC);
+
+ va_pa_offset = PAGE_OFFSET - pa;
+ pfn_base = PFN_DOWN(pa);
+
+ /* Sanity check alignment and size */
+ BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
+ BUG_ON((pa % (PAGE_SIZE * PTRS_PER_PTE)) != 0);
+
+#ifndef __PAGETABLE_PMD_FOLDED
+ trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
+ pfn_pgd(PFN_DOWN((uintptr_t)trampoline_pmd),
+ __pgprot(_PAGE_TABLE));
+ trampoline_pmd[0] = pfn_pmd(PFN_DOWN(pa), prot);
+
+ for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
+ o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
+ swapper_pg_dir[o] =
+ pfn_pgd(PFN_DOWN((uintptr_t)swapper_pmd) + i,
+ __pgprot(_PAGE_TABLE));
+ }
+ for (i = 0; i < ARRAY_SIZE(swapper_pmd); i++)
+ swapper_pmd[i] = pfn_pmd(PFN_DOWN(pa + i * PMD_SIZE), prot);
+#else
+ trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
+ pfn_pgd(PFN_DOWN(pa), prot);
+
+ for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
+ o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
+ swapper_pg_dir[o] =
+ pfn_pgd(PFN_DOWN(pa + i * PGDIR_SIZE), prot);
+ }
+#endif
+}
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2019-01-07 16:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-07 16:10 [PATCH 0/5] Fixmap support and MM cleanups Anup Patel
2019-01-07 16:10 ` [PATCH 1/5] RISC-V: Move free_initrd_mem() to kernel/setup.c Anup Patel
2019-01-15 13:43 ` Christoph Hellwig
2019-01-19 10:34 ` Anup Patel
2019-01-07 16:10 ` [PATCH 2/5] RISC-V: Setup init_mm before parse_early_param() Anup Patel
2019-01-15 13:44 ` Christoph Hellwig
2019-01-19 10:42 ` Anup Patel
2019-01-07 16:10 ` [PATCH 3/5] RISC-V: Move setup_bootmem() to mm/init.c Anup Patel
2019-01-15 13:44 ` Christoph Hellwig
2019-01-19 10:43 ` Anup Patel
2019-01-07 16:10 ` Anup Patel [this message]
2019-01-15 13:45 ` [PATCH 4/5] RISC-V: Move setup_vm() " Christoph Hellwig
2019-01-07 16:10 ` [PATCH 5/5] RISC-V: Implement compile-time fixed mappings Anup Patel
2019-01-15 13:47 ` Christoph Hellwig
2019-01-19 10:44 ` Anup Patel
2019-01-19 11:44 ` Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190107161047.10516-5-anup@brainfault.org \
--to=anup@brainfault.org \
--cc=anup.patel@wdc.com \
--cc=aou@eecs.berkeley.edu \
--cc=atish.patra@wdc.com \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@sifive.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).