Linux-RISC-V Archive on lore.kernel.org
 help / Atom feed
From: Anup Patel <Anup.Patel@wdc.com>
To: Palmer Dabbelt <palmer@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <Anup.Patel@wdc.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Christoph Hellwig <hch@infradead.org>,
	Atish Patra <Atish.Patra@wdc.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	"linux-riscv@lists.infradead.org"
	<linux-riscv@lists.infradead.org>
Subject: [PATCH v3 4/6] RISC-V: Move setup_vm() to mm/init.c
Date: Tue, 12 Feb 2019 14:00:30 +0000
Message-ID: <20190212135942.105008-5-anup.patel@wdc.com> (raw)
In-Reply-To: <20190212135942.105008-1-anup.patel@wdc.com>

The setup_vm() is responsible for setting up initial page table hence
should be placed in mm/init.c.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/setup.c | 49 ---------------------------------------
 arch/riscv/mm/init.c      | 49 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+), 49 deletions(-)

diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index ab29a66a17fc..9cd583b6d1cd 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -102,55 +102,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif /* CONFIG_BLK_DEV_INITRD */
 
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
-pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
-
-#ifndef __PAGETABLE_PMD_FOLDED
-#define NUM_SWAPPER_PMDS ((uintptr_t)-PAGE_OFFSET >> PGDIR_SHIFT)
-pmd_t swapper_pmd[PTRS_PER_PMD*((-PAGE_OFFSET)/PGDIR_SIZE)] __page_aligned_bss;
-pmd_t trampoline_pmd[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
-#endif
-
-asmlinkage void __init setup_vm(void)
-{
-	extern char _start;
-	uintptr_t i;
-	uintptr_t pa = (uintptr_t) &_start;
-	pgprot_t prot = __pgprot(pgprot_val(PAGE_KERNEL) | _PAGE_EXEC);
-
-	va_pa_offset = PAGE_OFFSET - pa;
-	pfn_base = PFN_DOWN(pa);
-
-	/* Sanity check alignment and size */
-	BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
-	BUG_ON((pa % (PAGE_SIZE * PTRS_PER_PTE)) != 0);
-
-#ifndef __PAGETABLE_PMD_FOLDED
-	trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
-		pfn_pgd(PFN_DOWN((uintptr_t)trampoline_pmd),
-			__pgprot(_PAGE_TABLE));
-	trampoline_pmd[0] = pfn_pmd(PFN_DOWN(pa), prot);
-
-	for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
-		size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
-		swapper_pg_dir[o] =
-			pfn_pgd(PFN_DOWN((uintptr_t)swapper_pmd) + i,
-				__pgprot(_PAGE_TABLE));
-	}
-	for (i = 0; i < ARRAY_SIZE(swapper_pmd); i++)
-		swapper_pmd[i] = pfn_pmd(PFN_DOWN(pa + i * PMD_SIZE), prot);
-#else
-	trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
-		pfn_pgd(PFN_DOWN(pa), prot);
-
-	for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
-		size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
-		swapper_pg_dir[o] =
-			pfn_pgd(PFN_DOWN(pa + i * PGDIR_SIZE), prot);
-	}
-#endif
-}
-
 void __init parse_dtb(unsigned int hartid, void *dtb)
 {
 	if (!early_init_dt_scan(__va(dtb)))
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index a57dba8ac9e7..7ed6ae90cf6b 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -103,3 +103,52 @@ void __init setup_bootmem(void)
 				  &memblock.memory, 0);
 	}
 }
+
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
+pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define NUM_SWAPPER_PMDS ((uintptr_t)-PAGE_OFFSET >> PGDIR_SHIFT)
+pmd_t swapper_pmd[PTRS_PER_PMD*((-PAGE_OFFSET)/PGDIR_SIZE)] __page_aligned_bss;
+pmd_t trampoline_pmd[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+#endif
+
+asmlinkage void __init setup_vm(void)
+{
+	extern char _start;
+	uintptr_t i;
+	uintptr_t pa = (uintptr_t) &_start;
+	pgprot_t prot = __pgprot(pgprot_val(PAGE_KERNEL) | _PAGE_EXEC);
+
+	va_pa_offset = PAGE_OFFSET - pa;
+	pfn_base = PFN_DOWN(pa);
+
+	/* Sanity check alignment and size */
+	BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
+	BUG_ON((pa % (PAGE_SIZE * PTRS_PER_PTE)) != 0);
+
+#ifndef __PAGETABLE_PMD_FOLDED
+	trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
+		pfn_pgd(PFN_DOWN((uintptr_t)trampoline_pmd),
+			__pgprot(_PAGE_TABLE));
+	trampoline_pmd[0] = pfn_pmd(PFN_DOWN(pa), prot);
+
+	for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
+		size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
+		swapper_pg_dir[o] =
+			pfn_pgd(PFN_DOWN((uintptr_t)swapper_pmd) + i,
+				__pgprot(_PAGE_TABLE));
+	}
+	for (i = 0; i < ARRAY_SIZE(swapper_pmd); i++)
+		swapper_pmd[i] = pfn_pmd(PFN_DOWN(pa + i * PMD_SIZE), prot);
+#else
+	trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
+		pfn_pgd(PFN_DOWN(pa), prot);
+
+	for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
+		size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
+		swapper_pg_dir[o] =
+			pfn_pgd(PFN_DOWN(pa + i * PGDIR_SIZE), prot);
+	}
+#endif
+}
-- 
2.17.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-12 14:00 [PATCH v3 0/6] Fixmap support and MM cleanups Anup Patel
2019-02-12 14:00 ` [PATCH v3 1/6] RISC-V: Move free_initrd_mem() to kernel/setup.c Anup Patel
2019-02-12 14:00 ` [PATCH v3 2/6] RISC-V: Setup init_mm before parse_early_param() Anup Patel
2019-02-12 14:00 ` [PATCH v3 3/6] RISC-V: Move setup_bootmem() to mm/init.c Anup Patel
2019-02-12 14:00 ` Anup Patel [this message]
2019-02-12 14:00 ` [PATCH v3 5/6] RISC-V: Implement compile-time fixed mappings Anup Patel
2019-02-12 14:01 ` [PATCH v3 6/6] RISC-V: Implement keepinitrd kernel parameter Anup Patel
2019-02-12 14:07   ` Andreas Schwab

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190212135942.105008-5-anup.patel@wdc.com \
    --to=anup.patel@wdc.com \
    --cc=Atish.Patra@wdc.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=hch@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@sifive.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org infradead-linux-riscv@archiver.kernel.org
	public-inbox-index linux-riscv


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/ public-inbox