Linux-RISC-V Archive on
 help / color / Atom feed
From: Paul Walmsley <>
	Paul Walmsley <>,
	Paul Walmsley <>,,
Subject: [PATCH v2] clk: sifive: restrict Kconfig scope for the FU540 PRCI driver
Date: Mon, 13 May 2019 14:30:04 -0700
Message-ID: <> (raw)

Restrict Kconfig scope for SiFive clock and reset IP block drivers
such that they won't appear on most configurations that are unlikely
to support them.  This is based on a suggestion from Pavel Machek
<>.  Ideally this should be dependent on
CONFIG_ARCH_SIFIVE, but since that Kconfig directive does not yet
exist, add dependencies on RISCV or COMPILE_TEST for now.

Signed-off-by: Paul Walmsley <>
Signed-off-by: Paul Walmsley <>
Reported-by: Pavel Machek <>
Cc: Michael Turquette <>
Cc: Stephen Boyd <>
This second version incorporates non-functional changes requested
by Stephen Boyd <>.

 drivers/clk/sifive/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
index 8db4a3eb4782..f3b4eb9cb0f5 100644
--- a/drivers/clk/sifive/Kconfig
+++ b/drivers/clk/sifive/Kconfig
@@ -2,6 +2,7 @@
 menuconfig CLK_SIFIVE
 	bool "SiFive SoC driver support"
+	depends on RISCV || COMPILE_TEST
 	  SoC drivers for SiFive Linux-capable SoCs.

linux-riscv mailing list

             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-13 21:30 Paul Walmsley [this message]
2019-05-19 21:25 ` Pavel Machek
2019-05-21 18:34 ` Stephen Boyd

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RISC-V Archive on

Archives are clonable:
	git clone --mirror linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ \
	public-inbox-index linux-riscv

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox