Linux-RISC-V Archive on lore.kernel.org
 help / color / Atom feed
From: Anup Patel <Anup.Patel@wdc.com>
To: Palmer Dabbelt <palmer@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>
Cc: Christoph Hellwig <hch@infradead.org>,
	Atish Patra <Atish.Patra@wdc.com>,
	"linux-riscv@lists.infradead.org"
	<linux-riscv@lists.infradead.org>,
	Anup Patel <Anup.Patel@wdc.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS
Date: Wed, 15 May 2019 06:30:39 +0000
Message-ID: <20190515063004.3466-1-anup.patel@wdc.com> (raw)

This patch enables NO_HZ_IDLE (idle dynamic ticks) and HIGH_RES_TIMERS
(hrtimers) in RV32 and RV64 defconfigs.

Both of the above options are enabled by default for architectures
such as x86, ARM, and ARM64.

The idle dynamic ticks helps use save power by stopping timer ticks
when the system is idle whereas hrtimers is a much improved timer
subsystem compared to the old "timer wheel" based system.

This patch is tested on SiFive Unleashed board and QEMU Virt machine.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
 arch/riscv/configs/defconfig      | 2 ++
 arch/riscv/configs/rv32_defconfig | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 2fd3461e50ab..f254c352ec57 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -1,5 +1,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
diff --git a/arch/riscv/configs/rv32_defconfig b/arch/riscv/configs/rv32_defconfig
index 1a911ed8e772..d5449ef805a3 100644
--- a/arch/riscv/configs/rv32_defconfig
+++ b/arch/riscv/configs/rv32_defconfig
@@ -1,5 +1,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
-- 
2.17.1

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-15  6:30 Anup Patel [this message]
2019-05-20  8:05 ` Anup Patel
2019-05-28 17:47   ` Palmer Dabbelt
2019-05-28 19:39     ` Atish Patra
2019-05-29  8:00     ` Andreas Schwab
2019-05-31 20:35       ` Palmer Dabbelt
2019-06-03 16:44         ` Paul Walmsley
2019-06-04  6:41           ` Christoph Hellwig

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190515063004.3466-1-anup.patel@wdc.com \
    --to=anup.patel@wdc.com \
    --cc=Atish.Patra@wdc.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=hch@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org infradead-linux-riscv@archiver.kernel.org
	public-inbox-index linux-riscv


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/ public-inbox