Linux-RISC-V Archive on lore.kernel.org
 help / color / Atom feed
From: Atish Patra <atish.patra@wdc.com>
To: linux-kernel@vger.kernel.org
Cc: Albert Ou <aou@eecs.berkeley.edu>,
	Alexios Zavras <alexios.zavras@intel.com>,
	Anup Patel <anup@brainfault.org>,
	Mike Rapoport <rppt@linux.ibm.com>,
	Atish Patra <atish.patra@wdc.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	linux-riscv@lists.infradead.org,
	Thomas Gleixner <tglx@linutronix.de>, Mao Han <han_mao@c-sky.com>
Subject: [PATCH v5 2/4] RISC-V: Add basic support for SBI v0.2
Date: Tue, 26 Nov 2019 11:05:01 -0800
Message-ID: <20191126190503.19303-3-atish.patra@wdc.com> (raw)
In-Reply-To: <20191126190503.19303-1-atish.patra@wdc.com>

The SBI v0.2 introduces a base extension which is backward compatible
with v0.1. Implement all helper functions and minimum required SBI
calls from v0.2 for now. All other base extension function will be
added later as per need.
As v0.2 calling convention is backward compatible with v0.1, remove
the v0.1 helper functions and just use v0.2 calling convention.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
---
 arch/riscv/include/asm/sbi.h | 139 ++++++++++----------
 arch/riscv/kernel/Makefile   |   1 +
 arch/riscv/kernel/sbi.c      | 247 ++++++++++++++++++++++++++++++++++-
 arch/riscv/kernel/setup.c    |   2 +
 4 files changed, 315 insertions(+), 74 deletions(-)

diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 96aaee270ded..906438322932 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -9,93 +9,88 @@
 #include <linux/types.h>
 
 #ifdef CONFIG_RISCV_SBI
-#define SBI_EXT_0_1_SET_TIMER 0x0
-#define SBI_EXT_0_1_CONSOLE_PUTCHAR 0x1
-#define SBI_EXT_0_1_CONSOLE_GETCHAR 0x2
-#define SBI_EXT_0_1_CLEAR_IPI 0x3
-#define SBI_EXT_0_1_SEND_IPI 0x4
-#define SBI_EXT_0_1_REMOTE_FENCE_I 0x5
-#define SBI_EXT_0_1_REMOTE_SFENCE_VMA 0x6
-#define SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID 0x7
-#define SBI_EXT_0_1_SHUTDOWN 0x8
+enum sbi_ext_id {
+	SBI_EXT_0_1_SET_TIMER = 0x0,
+	SBI_EXT_0_1_CONSOLE_PUTCHAR = 0x1,
+	SBI_EXT_0_1_CONSOLE_GETCHAR = 0x2,
+	SBI_EXT_0_1_CLEAR_IPI = 0x3,
+	SBI_EXT_0_1_SEND_IPI = 0x4,
+	SBI_EXT_0_1_REMOTE_FENCE_I = 0x5,
+	SBI_EXT_0_1_REMOTE_SFENCE_VMA = 0x6,
+	SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID = 0x7,
+	SBI_EXT_0_1_SHUTDOWN = 0x8,
+	SBI_EXT_BASE = 0x10,
+};
 
-#define SBI_CALL(which, arg0, arg1, arg2, arg3) ({             \
-	register uintptr_t a0 asm ("a0") = (uintptr_t)(arg0);	\
-	register uintptr_t a1 asm ("a1") = (uintptr_t)(arg1);	\
-	register uintptr_t a2 asm ("a2") = (uintptr_t)(arg2);	\
-	register uintptr_t a3 asm ("a3") = (uintptr_t)(arg3);	\
-	register uintptr_t a7 asm ("a7") = (uintptr_t)(which);	\
-	asm volatile ("ecall"					\
-		      : "+r" (a0)				\
-		      : "r" (a1), "r" (a2), "r" (a3), "r" (a7)	\
-		      : "memory");				\
-	a0;							\
-})
+enum sbi_ext_base_fid {
+	SBI_BASE_GET_SPEC_VERSION = 0,
+	SBI_BASE_GET_IMP_ID,
+	SBI_BASE_GET_IMP_VERSION,
+	SBI_BASE_PROBE_EXT,
+	SBI_BASE_GET_MVENDORID,
+	SBI_BASE_GET_MARCHID,
+	SBI_BASE_GET_MIMPID,
+};
 
-/* Lazy implementations until SBI is finalized */
-#define SBI_CALL_0(which) SBI_CALL(which, 0, 0, 0, 0)
-#define SBI_CALL_1(which, arg0) SBI_CALL(which, arg0, 0, 0, 0)
-#define SBI_CALL_2(which, arg0, arg1) SBI_CALL(which, arg0, arg1, 0, 0)
-#define SBI_CALL_3(which, arg0, arg1, arg2) \
-		SBI_CALL(which, arg0, arg1, arg2, 0)
-#define SBI_CALL_4(which, arg0, arg1, arg2, arg3) \
-		SBI_CALL(which, arg0, arg1, arg2, arg3)
+#define SBI_SPEC_VERSION_DEFAULT	0x1
+#define SBI_SPEC_VERSION_MAJOR_OFFSET	24
+#define SBI_SPEC_VERSION_MAJOR_MASK	0x7f
+#define SBI_SPEC_VERSION_MINOR_MASK	0xffffff
 
-static inline void sbi_console_putchar(int ch)
-{
-	SBI_CALL_1(SBI_EXT_0_1_CONSOLE_PUTCHAR, ch);
-}
+/* SBI return error codes */
+#define SBI_SUCCESS		0
+#define SBI_ERR_FAILURE		-1
+#define SBI_ERR_NOT_SUPPORTED	-2
+#define SBI_ERR_INVALID_PARAM   -3
+#define SBI_ERR_DENIED		-4
+#define SBI_ERR_INVALID_ADDRESS -5
 
-static inline int sbi_console_getchar(void)
-{
-	return SBI_CALL_0(SBI_EXT_0_1_CONSOLE_GETCHAR);
-}
+extern unsigned long sbi_spec_version;
+struct sbiret {
+	long error;
+	long value;
+};
 
-static inline void sbi_set_timer(uint64_t stime_value)
-{
-#if __riscv_xlen == 32
-	SBI_CALL_2(SBI_EXT_0_1_SET_TIMER, stime_value,
-			  stime_value >> 32);
-#else
-	SBI_CALL_1(SBI_EXT_0_1_SET_TIMER, stime_value);
-#endif
-}
-
-static inline void sbi_shutdown(void)
-{
-	SBI_CALL_0(SBI_EXT_0_1_SHUTDOWN);
-}
+int sbi_init(void);
+struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
+			unsigned long arg1, unsigned long arg2,
+			unsigned long arg3, unsigned long arg4,
+			unsigned long arg5);
 
-static inline void sbi_clear_ipi(void)
-{
-	SBI_CALL_0(SBI_EXT_0_1_CLEAR_IPI);
-}
+void sbi_console_putchar(int ch);
+int sbi_console_getchar(void);
+void sbi_set_timer(uint64_t stime_value);
+void sbi_shutdown(void);
+void sbi_clear_ipi(void);
+void sbi_send_ipi(const unsigned long *hart_mask);
+void sbi_remote_fence_i(const unsigned long *hart_mask);
+void sbi_remote_sfence_vma(const unsigned long *hart_mask,
+			   unsigned long start,
+			   unsigned long size);
 
-static inline void sbi_send_ipi(const unsigned long *hart_mask)
-{
-	SBI_CALL_1(SBI_EXT_0_1_SEND_IPI, hart_mask);
-}
+void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
+				unsigned long start,
+				unsigned long size,
+				unsigned long asid);
+int sbi_probe_extension(long ext);
 
-static inline void sbi_remote_fence_i(const unsigned long *hart_mask)
+/* Check if current SBI specification version is 0.1 or not */
+static inline int sbi_spec_is_0_1(void)
 {
-	SBI_CALL_1(SBI_EXT_0_1_REMOTE_FENCE_I, hart_mask);
+	return (sbi_spec_version == SBI_SPEC_VERSION_DEFAULT) ? 1 : 0;
 }
 
-static inline void sbi_remote_sfence_vma(const unsigned long *hart_mask,
-					 unsigned long start,
-					 unsigned long size)
+/* Get the major version of SBI */
+static inline unsigned long sbi_major_version(void)
 {
-	SBI_CALL_3(SBI_EXT_0_1_REMOTE_SFENCE_VMA, hart_mask,
-			  start, size);
+	return (sbi_spec_version >> SBI_SPEC_VERSION_MAJOR_OFFSET) &
+		SBI_SPEC_VERSION_MAJOR_MASK;
 }
 
-static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
-					      unsigned long start,
-					      unsigned long size,
-					      unsigned long asid)
+/* Get the minor version of SBI */
+static inline unsigned long sbi_minor_version(void)
 {
-	SBI_CALL_4(SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID, hart_mask,
-			  start, size, asid);
+	return sbi_spec_version & SBI_SPEC_VERSION_MINOR_MASK;
 }
 #else /* CONFIG_RISCV_SBI */
 /* stubs for code that is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index f40205cb9a22..56127dd359f1 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -17,6 +17,7 @@ obj-y	+= irq.o
 obj-y	+= process.o
 obj-y	+= ptrace.o
 obj-y	+= reset.o
+obj-y	+= sbi.o
 obj-y	+= setup.o
 obj-y	+= signal.o
 obj-y	+= syscall_table.o
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index f6c7c3e82d28..a47e23c3a2e1 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -4,14 +4,257 @@
 #include <linux/pm.h>
 #include <asm/sbi.h>
 
+/* default SBI version is 0.1 */
+unsigned long sbi_spec_version = SBI_SPEC_VERSION_DEFAULT;
+EXPORT_SYMBOL(sbi_spec_version);
+
+struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
+			unsigned long arg1, unsigned long arg2,
+			unsigned long arg3, unsigned long arg4,
+			unsigned long arg5)
+{
+	struct sbiret ret;
+
+	register uintptr_t a0 asm ("a0") = (uintptr_t)(arg0);
+	register uintptr_t a1 asm ("a1") = (uintptr_t)(arg1);
+	register uintptr_t a2 asm ("a2") = (uintptr_t)(arg2);
+	register uintptr_t a3 asm ("a3") = (uintptr_t)(arg3);
+	register uintptr_t a4 asm ("a4") = (uintptr_t)(arg4);
+	register uintptr_t a5 asm ("a5") = (uintptr_t)(arg5);
+	register uintptr_t a6 asm ("a6") = (uintptr_t)(fid);
+	register uintptr_t a7 asm ("a7") = (uintptr_t)(ext);
+	asm volatile ("ecall"
+		      : "+r" (a0), "+r" (a1)
+		      : "r" (a2), "r" (a3), "r" (a4), "r" (a5), "r" (a6), "r" (a7)
+		      : "memory");
+	ret.error = a0;
+	ret.value = a1;
+
+	return ret;
+}
+EXPORT_SYMBOL(sbi_ecall);
+
+static int sbi_err_map_linux_errno(int err)
+{
+	switch (err) {
+	case SBI_SUCCESS:
+		return 0;
+	case SBI_ERR_DENIED:
+		return -EPERM;
+	case SBI_ERR_INVALID_PARAM:
+		return -EINVAL;
+	case SBI_ERR_INVALID_ADDRESS:
+		return -EFAULT;
+	case SBI_ERR_NOT_SUPPORTED:
+	case SBI_ERR_FAILURE:
+	default:
+		return -ENOTSUPP;
+	};
+}
+
+/**
+ * sbi_console_putchar() - Writes given character to the console device.
+ * @ch: The data to be written to the console.
+ *
+ * Return: None
+ */
+void sbi_console_putchar(int ch)
+{
+	sbi_ecall(SBI_EXT_0_1_CONSOLE_PUTCHAR, 0, ch, 0, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(sbi_console_putchar);
+
+/**
+ * sbi_console_getchar() - Reads a byte from console device.
+ *
+ * Returns the value read from console.
+ */
+int sbi_console_getchar(void)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_0_1_CONSOLE_GETCHAR, 0, 0, 0, 0, 0, 0, 0);
+
+	return ret.error;
+}
+EXPORT_SYMBOL(sbi_console_getchar);
+
+/**
+ * sbi_set_timer() - Program the timer for next timer event.
+ * @stime_value: The value after which next timer event should fire.
+ *
+ * Return: None
+ */
+void sbi_set_timer(uint64_t stime_value)
+{
+#if __riscv_xlen == 32
+	sbi_ecall(SBI_EXT_0_1_SET_TIMER, 0, stime_value,
+			  stime_value >> 32, 0, 0, 0, 0);
+#else
+	sbi_ecall(SBI_EXT_0_1_SET_TIMER, 0, stime_value, 0, 0, 0, 0, 0);
+#endif
+}
+EXPORT_SYMBOL(sbi_set_timer);
+
+/**
+ * sbi_shutdown() - Remove all the harts from executing supervisor code.
+ *
+ * Return: None
+ */
+void sbi_shutdown(void)
+{
+	sbi_ecall(SBI_EXT_0_1_SHUTDOWN, 0, 0, 0, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(sbi_shutdown);
+
+/**
+ * sbi_clear_ipi() - Clear any pending IPIs for the calling hart.
+ *
+ * Return: None
+ */
+void sbi_clear_ipi(void)
+{
+	sbi_ecall(SBI_EXT_0_1_CLEAR_IPI, 0, 0, 0, 0, 0, 0, 0);
+}
+
+/**
+ * sbi_send_ipi() - Send an IPI to any hart.
+ * @hart_mask: A cpu mask containing all the target harts.
+ *
+ * Return: None
+ */
+void sbi_send_ipi(const unsigned long *hart_mask)
+{
+	sbi_ecall(SBI_EXT_0_1_SEND_IPI, 0, (unsigned long)hart_mask,
+			0, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(sbi_send_ipi);
+
+/**
+ * sbi_remote_fence_i() - Execute FENCE.I instruction on given remote harts.
+ * @hart_mask: A cpu mask containing all the target harts.
+ *
+ * Return: None
+ */
+void sbi_remote_fence_i(const unsigned long *hart_mask)
+{
+	sbi_ecall(SBI_EXT_0_1_REMOTE_FENCE_I, 0, (unsigned long)hart_mask,
+			0, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(sbi_remote_fence_i);
+
+/**
+ * sbi_remote_sfence_vma() - Execute SFENCE.VMA instructions on given remote
+ *			     harts for the specified virtual address range.
+ * @hart_mask: A cpu mask containing all the target harts.
+ * @start: Start of the virtual address
+ * @size: Total size of the virtual address range.
+ *
+ * Return: None
+ */
+void sbi_remote_sfence_vma(const unsigned long *hart_mask,
+					 unsigned long start,
+					 unsigned long size)
+{
+	sbi_ecall(SBI_EXT_0_1_REMOTE_SFENCE_VMA, 0,
+			(unsigned long)hart_mask, start, size, 0, 0, 0);
+}
+EXPORT_SYMBOL(sbi_remote_sfence_vma);
+
+/**
+ * sbi_remote_sfence_vma_asid() - Execute SFENCE.VMA instructions on given
+ * remote harts for a virtual address range belonging to a specific ASID.
+ *
+ * @hart_mask: A cpu mask containing all the target harts.
+ * @start: Start of the virtual address
+ * @size: Total size of the virtual address range.
+ * @asid: The value of address space identifier (ASID).
+ *
+ * Return: None
+ */
+void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
+					      unsigned long start,
+					      unsigned long size,
+					      unsigned long asid)
+{
+	sbi_ecall(SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID, 0,
+			(unsigned long)hart_mask, start, size, asid, 0, 0);
+}
+EXPORT_SYMBOL(sbi_remote_sfence_vma_asid);
+
+/**
+ * sbi_probe_extension() - Check if an SBI extension ID is supported or not.
+ * @extid: The extension ID to be probed.
+ *
+ * Return: Extension specific nonzero value f yes, -ENOTSUPP otherwise.
+ */
+int sbi_probe_extension(long extid)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_BASE, SBI_BASE_PROBE_EXT, extid, 0, 0, 0, 0, 0);
+	if (!ret.error)
+		if (ret.value)
+			return ret.value;
+
+	return -ENOTSUPP;
+}
+EXPORT_SYMBOL(sbi_probe_extension);
+
+static long sbi_get_spec_version(void)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_BASE, SBI_BASE_GET_SPEC_VERSION,
+			       0, 0, 0, 0, 0, 0);
+	if (!ret.error)
+		return ret.value;
+	else
+		return ret.error;
+}
+
+static long sbi_get_firmware_id(void)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_BASE, SBI_BASE_GET_IMP_ID,
+			       0, 0, 0, 0, 0, 0);
+	if (!ret.error)
+		return ret.value;
+	else
+		return sbi_err_map_linux_errno(ret.error);
+}
+
+static long sbi_get_firmware_version(void)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_BASE, SBI_BASE_GET_IMP_VERSION,
+			       0, 0, 0, 0, 0, 0);
+	if (!ret.error)
+		return ret.value;
+	else
+		return sbi_err_map_linux_errno(ret.error);
+}
+
 static void sbi_power_off(void)
 {
 	sbi_shutdown();
 }
 
-static int __init sbi_init(void)
+int __init sbi_init(void)
 {
+	int ret;
+
 	pm_power_off = sbi_power_off;
+	ret = sbi_get_spec_version();
+	if (ret > 0)
+		sbi_spec_version = ret;
+
+	pr_info("SBI specification v%lu.%lu detected\n",
+		sbi_major_version(), sbi_minor_version());
+	if (!sbi_spec_is_0_1())
+		pr_info("SBI implementation ID=0x%lx Version=0x%lx\n",
+			sbi_get_firmware_id(), sbi_get_firmware_version());
 	return 0;
 }
-early_initcall(sbi_init);
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 365ff8420bfe..f0a3c51e3d1b 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -22,6 +22,7 @@
 #include <asm/sections.h>
 #include <asm/pgtable.h>
 #include <asm/smp.h>
+#include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/thread_info.h>
 
@@ -74,6 +75,7 @@ void __init setup_arch(char **cmdline_p)
 	swiotlb_init(1);
 #endif
 
+	sbi_init();
 #ifdef CONFIG_SMP
 	setup_smp();
 #endif
-- 
2.23.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-26 19:04 [PATCH v5 0/4] Add " Atish Patra
2019-11-26 19:05 ` [PATCH v5 1/4] RISC-V: Mark existing SBI as 0.1 SBI Atish Patra
2019-12-02 23:59   ` Palmer Dabbelt
2019-11-26 19:05 ` Atish Patra [this message]
2019-12-03 21:17   ` [PATCH v5 2/4] RISC-V: Add basic support for SBI v0.2 Palmer Dabbelt
2019-11-26 19:05 ` [PATCH v5 3/4] RISC-V: Introduce a new config for SBI v0.1 Atish Patra
2019-12-04 18:52   ` Palmer Dabbelt
2019-12-04 22:03     ` Atish Patra
2019-11-26 19:05 ` [PATCH v5 4/4] RISC-V: Implement new SBI v0.2 extensions Atish Patra
2019-11-29  4:51   ` Anup Patel
2019-11-29  4:57     ` Anup Patel
2019-12-04 21:10       ` Atish Patra
2019-12-04 18:52   ` Palmer Dabbelt
2019-12-04 22:04     ` Atish Patra
2019-12-04 18:56 ` [PATCH v5 0/4] Add support for SBI v0.2 Palmer Dabbelt

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191126190503.19303-3-atish.patra@wdc.com \
    --to=atish.patra@wdc.com \
    --cc=alexios.zavras@intel.com \
    --cc=anup@brainfault.org \
    --cc=aou@eecs.berkeley.edu \
    --cc=han_mao@c-sky.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=rppt@linux.ibm.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org
	public-inbox-index linux-riscv

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git