[PATCH] irqchip/sifive-plic: Add support for multiple PLICs

[PATCH] irqchip/sifive-plic: Add support for multiple PLICs

[Atish Patra]

Current, PLIC driver can support only 1 PLIC on the board. However,
there can be multiple PLICs present on a two socket systems in RISC-V.

Modify the driver so that each PLIC handler can have a information
about individual PLIC registers and an irqdomain associated with it.

Tested on two socket RISC-V system based on VCU118 FPGA connected via
OmniXtend protocol.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
 drivers/irqchip/irq-sifive-plic.c | 81 +++++++++++++++++++------------
 1 file changed, 51 insertions(+), 30 deletions(-)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index c72c036aea76..aea1f2f0f0d5 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -55,7 +55,11 @@
 #define     CONTEXT_THRESHOLD		0x00
 #define     CONTEXT_CLAIM		0x04
 
-static void __iomem *plic_regs;
+struct plic_hw {
+	struct cpumask lmask;
+	struct irq_domain *irqdomain;
+	void __iomem *regs;
+};
 
 struct plic_handler {
 	bool			present;
@@ -66,6 +70,7 @@ struct plic_handler {
 	 */
 	raw_spinlock_t		enable_lock;
 	void __iomem		*enable_base;
+	struct plic_hw		*hw;
 };
 static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
 
@@ -84,31 +89,40 @@ static inline void plic_toggle(struct plic_handler *handler,
 }
 
 static inline void plic_irq_toggle(const struct cpumask *mask,
-				   int hwirq, int enable)
+				   struct irq_data *d, int enable)
 {
 	int cpu;
+	struct plic_hw *hw = d->domain->host_data;
 
-	writel(enable, plic_regs + PRIORITY_BASE + hwirq * PRIORITY_PER_ID);
+	writel(enable, hw->regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
 	for_each_cpu(cpu, mask) {
 		struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);
 
-		if (handler->present)
-			plic_toggle(handler, hwirq, enable);
+		if (handler->present &&
+		    cpumask_test_cpu(cpu, &handler->hw->lmask))
+			plic_toggle(handler, d->hwirq, enable);
 	}
 }
 
 static void plic_irq_enable(struct irq_data *d)
 {
-	unsigned int cpu = cpumask_any_and(irq_data_get_affinity_mask(d),
-					   cpu_online_mask);
+	struct cpumask amask;
+	unsigned int cpu;
+	struct plic_hw *hw = d->domain->host_data;
+
+	cpumask_and(&amask, &hw->lmask, cpu_online_mask);
+	cpu = cpumask_any_and(irq_data_get_affinity_mask(d),
+					   &amask);
 	if (WARN_ON_ONCE(cpu >= nr_cpu_ids))
 		return;
-	plic_irq_toggle(cpumask_of(cpu), d->hwirq, 1);
+	plic_irq_toggle(cpumask_of(cpu), d, 1);
 }
 
 static void plic_irq_disable(struct irq_data *d)
 {
-	plic_irq_toggle(cpu_possible_mask, d->hwirq, 0);
+	struct plic_hw *hw = d->domain->host_data;
+
+	plic_irq_toggle(&hw->lmask, d, 0);
 }
 
 #ifdef CONFIG_SMP
@@ -116,18 +130,22 @@ static int plic_set_affinity(struct irq_data *d,
 			     const struct cpumask *mask_val, bool force)
 {
 	unsigned int cpu;
+	struct cpumask amask;
+	struct plic_hw *hw = d->domain->host_data;
+
+	cpumask_and(&amask, &hw->lmask, mask_val);
 
 	if (force)
-		cpu = cpumask_first(mask_val);
+		cpu = cpumask_first(&amask);
 	else
-		cpu = cpumask_any_and(mask_val, cpu_online_mask);
+		cpu = cpumask_any_and(&amask, cpu_online_mask);
 
 	if (cpu >= nr_cpu_ids)
 		return -EINVAL;
 
 	if (!irqd_irq_disabled(d)) {
-		plic_irq_toggle(cpu_possible_mask, d->hwirq, 0);
-		plic_irq_toggle(cpumask_of(cpu), d->hwirq, 1);
+		plic_irq_toggle(&hw->lmask, d, 0);
+		plic_irq_toggle(cpumask_of(cpu), d, 1);
 	}
 
 	irq_data_update_effective_affinity(d, cpumask_of(cpu));
@@ -163,8 +181,6 @@ static const struct irq_domain_ops plic_irqdomain_ops = {
 	.xlate		= irq_domain_xlate_onecell,
 };
 
-static struct irq_domain *plic_irqdomain;
-
 /*
  * Handling an interrupt is a two-step process: first you claim the interrupt
  * by reading the claim register, then you complete the interrupt by writing
@@ -181,7 +197,7 @@ static void plic_handle_irq(struct pt_regs *regs)
 
 	csr_clear(sie, SIE_SEIE);
 	while ((hwirq = readl(claim))) {
-		int irq = irq_find_mapping(plic_irqdomain, hwirq);
+		int irq = irq_find_mapping(handler->hw->irqdomain, hwirq);
 
 		if (unlikely(irq <= 0))
 			pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
@@ -212,15 +228,17 @@ static int __init plic_init(struct device_node *node,
 {
 	int error = 0, nr_contexts, nr_handlers = 0, i;
 	u32 nr_irqs;
+	struct plic_hw *hw;
 
-	if (plic_regs) {
-		pr_warn("PLIC already present.\n");
-		return -ENXIO;
-	}
+	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+	if (!hw)
+		return -ENOMEM;
 
-	plic_regs = of_iomap(node, 0);
-	if (WARN_ON(!plic_regs))
-		return -EIO;
+	hw->regs = of_iomap(node, 0);
+	if (WARN_ON(!hw->regs)) {
+		error = -EIO;
+		goto out_freehw;
+	}
 
 	error = -EINVAL;
 	of_property_read_u32(node, "riscv,ndev", &nr_irqs);
@@ -234,9 +252,9 @@ static int __init plic_init(struct device_node *node,
 		goto out_iounmap;
 
 	error = -ENOMEM;
-	plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
-			&plic_irqdomain_ops, NULL);
-	if (WARN_ON(!plic_irqdomain))
+	hw->irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
+			&plic_irqdomain_ops, hw);
+	if (WARN_ON(!hw->irqdomain))
 		goto out_iounmap;
 
 	for (i = 0; i < nr_contexts; i++) {
@@ -279,13 +297,14 @@ static int __init plic_init(struct device_node *node,
 			goto done;
 		}
 
+		cpumask_set_cpu(cpu, &hw->lmask);
 		handler->present = true;
 		handler->hart_base =
-			plic_regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
+			hw->regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
 		raw_spin_lock_init(&handler->enable_lock);
 		handler->enable_base =
-			plic_regs + ENABLE_BASE + i * ENABLE_PER_HART;
-
+			hw->regs + ENABLE_BASE + i * ENABLE_PER_HART;
+		handler->hw = hw;
 done:
 		/* priority must be > threshold to trigger an interrupt */
 		writel(threshold, handler->hart_base + CONTEXT_THRESHOLD);
@@ -300,7 +319,9 @@ static int __init plic_init(struct device_node *node,
 	return 0;
 
 out_iounmap:
-	iounmap(plic_regs);
+	iounmap(hw->regs);
+out_freehw:
+	kfree(hw);
 	return error;
 }
 
-- 
2.24.0

Re: [PATCH] irqchip/sifive-plic: Add support for multiple PLICs

[Marc Zyngier]

[Fixing Palmer's email address]

On 2019-12-06 02:31, Atish Patra wrote:
> Current, PLIC driver can support only 1 PLIC on the board. However,
> there can be multiple PLICs present on a two socket systems in 
> RISC-V.
>
> Modify the driver so that each PLIC handler can have a information
> about individual PLIC registers and an irqdomain associated with it.
>
> Tested on two socket RISC-V system based on VCU118 FPGA connected via
> OmniXtend protocol.
>
> Signed-off-by: Atish Patra <atish.patra@wdc.com>
> Signed-off-by: Anup Patel <anup.patel@wdc.com>

There seem to be some confusion here about who the author of the patch 
is.
If this is a co-development, please use the appropriate tag.

> ---
>  drivers/irqchip/irq-sifive-plic.c | 81 
> +++++++++++++++++++------------
>  1 file changed, 51 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/irqchip/irq-sifive-plic.c
> b/drivers/irqchip/irq-sifive-plic.c
> index c72c036aea76..aea1f2f0f0d5 100644
> --- a/drivers/irqchip/irq-sifive-plic.c
> +++ b/drivers/irqchip/irq-sifive-plic.c
> @@ -55,7 +55,11 @@
>  #define     CONTEXT_THRESHOLD		0x00
>  #define     CONTEXT_CLAIM		0x04
>
> -static void __iomem *plic_regs;
> +struct plic_hw {
> +	struct cpumask lmask;
> +	struct irq_domain *irqdomain;
> +	void __iomem *regs;
> +};

The '_hw' suffix is a bit unfortunate, as there is mostly SW constructs
in this structure. Maybe something more general like 'context' would
be more appropriate.

>
>  struct plic_handler {
>  	bool			present;
> @@ -66,6 +70,7 @@ struct plic_handler {
>  	 */
>  	raw_spinlock_t		enable_lock;
>  	void __iomem		*enable_base;
> +	struct plic_hw		*hw;
>  };
>  static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
>
> @@ -84,31 +89,40 @@ static inline void plic_toggle(struct
> plic_handler *handler,
>  }
>
>  static inline void plic_irq_toggle(const struct cpumask *mask,
> -				   int hwirq, int enable)
> +				   struct irq_data *d, int enable)
>  {
>  	int cpu;
> +	struct plic_hw *hw = d->domain->host_data;

The usual construct is to transfer the domain->host_data pointer to
the irq_data->chip_data pointer at map() time, using 
irq_set_chip_data().

You can then retrieve the pointer with irq_get_chip_data(), and save
yourselves some pointer chasing.

>
> -	writel(enable, plic_regs + PRIORITY_BASE + hwirq * 
> PRIORITY_PER_ID);
> +	writel(enable, hw->regs + PRIORITY_BASE + d->hwirq * 
> PRIORITY_PER_ID);
>  	for_each_cpu(cpu, mask) {
>  		struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);
>
> -		if (handler->present)
> -			plic_toggle(handler, hwirq, enable);
> +		if (handler->present &&
> +		    cpumask_test_cpu(cpu, &handler->hw->lmask))
> +			plic_toggle(handler, d->hwirq, enable);
>  	}
>  }
>
>  static void plic_irq_enable(struct irq_data *d)
>  {
> -	unsigned int cpu = cpumask_any_and(irq_data_get_affinity_mask(d),
> -					   cpu_online_mask);
> +	struct cpumask amask;
> +	unsigned int cpu;
> +	struct plic_hw *hw = d->domain->host_data;
> +
> +	cpumask_and(&amask, &hw->lmask, cpu_online_mask);
> +	cpu = cpumask_any_and(irq_data_get_affinity_mask(d),
> +					   &amask);
>  	if (WARN_ON_ONCE(cpu >= nr_cpu_ids))
>  		return;
> -	plic_irq_toggle(cpumask_of(cpu), d->hwirq, 1);
> +	plic_irq_toggle(cpumask_of(cpu), d, 1);
>  }
>
>  static void plic_irq_disable(struct irq_data *d)
>  {
> -	plic_irq_toggle(cpu_possible_mask, d->hwirq, 0);
> +	struct plic_hw *hw = d->domain->host_data;
> +
> +	plic_irq_toggle(&hw->lmask, d, 0);
>  }
>
>  #ifdef CONFIG_SMP
> @@ -116,18 +130,22 @@ static int plic_set_affinity(struct irq_data 
> *d,
>  			     const struct cpumask *mask_val, bool force)
>  {
>  	unsigned int cpu;
> +	struct cpumask amask;
> +	struct plic_hw *hw = d->domain->host_data;
> +
> +	cpumask_and(&amask, &hw->lmask, mask_val);

So this means that an interrupt cannot move between sockets?
How is that going to work with CPU hotplug? This seems like
a pretty bad restriction for anything but the most basic
experimental platform.

>
>  	if (force)
> -		cpu = cpumask_first(mask_val);
> +		cpu = cpumask_first(&amask);
>  	else
> -		cpu = cpumask_any_and(mask_val, cpu_online_mask);
> +		cpu = cpumask_any_and(&amask, cpu_online_mask);
>
>  	if (cpu >= nr_cpu_ids)
>  		return -EINVAL;
>
>  	if (!irqd_irq_disabled(d)) {
> -		plic_irq_toggle(cpu_possible_mask, d->hwirq, 0);
> -		plic_irq_toggle(cpumask_of(cpu), d->hwirq, 1);
> +		plic_irq_toggle(&hw->lmask, d, 0);
> +		plic_irq_toggle(cpumask_of(cpu), d, 1);
>  	}
>
>  	irq_data_update_effective_affinity(d, cpumask_of(cpu));
> @@ -163,8 +181,6 @@ static const struct irq_domain_ops 
> plic_irqdomain_ops = {
>  	.xlate		= irq_domain_xlate_onecell,
>  };
>
> -static struct irq_domain *plic_irqdomain;
> -
>  /*
>   * Handling an interrupt is a two-step process: first you claim the
> interrupt
>   * by reading the claim register, then you complete the interrupt by 
> writing
> @@ -181,7 +197,7 @@ static void plic_handle_irq(struct pt_regs *regs)
>
>  	csr_clear(sie, SIE_SEIE);
>  	while ((hwirq = readl(claim))) {
> -		int irq = irq_find_mapping(plic_irqdomain, hwirq);
> +		int irq = irq_find_mapping(handler->hw->irqdomain, hwirq);
>
>  		if (unlikely(irq <= 0))
>  			pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
> @@ -212,15 +228,17 @@ static int __init plic_init(struct device_node 
> *node,
>  {
>  	int error = 0, nr_contexts, nr_handlers = 0, i;
>  	u32 nr_irqs;
> +	struct plic_hw *hw;
>
> -	if (plic_regs) {
> -		pr_warn("PLIC already present.\n");
> -		return -ENXIO;
> -	}
> +	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
> +	if (!hw)
> +		return -ENOMEM;
>
> -	plic_regs = of_iomap(node, 0);
> -	if (WARN_ON(!plic_regs))
> -		return -EIO;
> +	hw->regs = of_iomap(node, 0);
> +	if (WARN_ON(!hw->regs)) {
> +		error = -EIO;
> +		goto out_freehw;
> +	}
>
>  	error = -EINVAL;
>  	of_property_read_u32(node, "riscv,ndev", &nr_irqs);
> @@ -234,9 +252,9 @@ static int __init plic_init(struct device_node 
> *node,
>  		goto out_iounmap;
>
>  	error = -ENOMEM;
> -	plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
> -			&plic_irqdomain_ops, NULL);
> -	if (WARN_ON(!plic_irqdomain))
> +	hw->irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
> +			&plic_irqdomain_ops, hw);
> +	if (WARN_ON(!hw->irqdomain))
>  		goto out_iounmap;
>
>  	for (i = 0; i < nr_contexts; i++) {
> @@ -279,13 +297,14 @@ static int __init plic_init(struct device_node 
> *node,
>  			goto done;
>  		}
>
> +		cpumask_set_cpu(cpu, &hw->lmask);
>  		handler->present = true;
>  		handler->hart_base =
> -			plic_regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
> +			hw->regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
>  		raw_spin_lock_init(&handler->enable_lock);
>  		handler->enable_base =
> -			plic_regs + ENABLE_BASE + i * ENABLE_PER_HART;
> -
> +			hw->regs + ENABLE_BASE + i * ENABLE_PER_HART;
> +		handler->hw = hw;
>  done:
>  		/* priority must be > threshold to trigger an interrupt */
>  		writel(threshold, handler->hart_base + CONTEXT_THRESHOLD);
> @@ -300,7 +319,9 @@ static int __init plic_init(struct device_node 
> *node,
>  	return 0;
>
>  out_iounmap:
> -	iounmap(plic_regs);
> +	iounmap(hw->regs);
> +out_freehw:
> +	kfree(hw);
>  	return error;
>  }

This otherwise seems like a very straightforward change.

Thanks,

         M.
-- 
Jazz is not dead. It just smells funny...

Re: [PATCH] irqchip/sifive-plic: Add support for multiple PLICs

[Atish Patra]

On Fri, 2019-12-06 at 09:32 +0000, Marc Zyngier wrote:
> [Fixing Palmer's email address]
> 
> On 2019-12-06 02:31, Atish Patra wrote:
> > Current, PLIC driver can support only 1 PLIC on the board. However,
> > there can be multiple PLICs present on a two socket systems in 
> > RISC-V.
> > 
> > Modify the driver so that each PLIC handler can have a information
> > about individual PLIC registers and an irqdomain associated with
> > it.
> > 
> > Tested on two socket RISC-V system based on VCU118 FPGA connected
> > via
> > OmniXtend protocol.
> > 
> > Signed-off-by: Atish Patra <atish.patra@wdc.com>
> > Signed-off-by: Anup Patel <anup.patel@wdc.com>
> 
> There seem to be some confusion here about who the author of the
> patch 
> is.
> If this is a co-development, please use the appropriate tag.
> 

ok. I will fix this in the next version.

> > ---
> >  drivers/irqchip/irq-sifive-plic.c | 81 
> > +++++++++++++++++++------------
> >  1 file changed, 51 insertions(+), 30 deletions(-)
> > 
> > diff --git a/drivers/irqchip/irq-sifive-plic.c
> > b/drivers/irqchip/irq-sifive-plic.c
> > index c72c036aea76..aea1f2f0f0d5 100644
> > --- a/drivers/irqchip/irq-sifive-plic.c
> > +++ b/drivers/irqchip/irq-sifive-plic.c
> > @@ -55,7 +55,11 @@
> >  #define     CONTEXT_THRESHOLD		0x00
> >  #define     CONTEXT_CLAIM		0x04
> > 
> > -static void __iomem *plic_regs;
> > +struct plic_hw {
> > +	struct cpumask lmask;
> > +	struct irq_domain *irqdomain;
> > +	void __iomem *regs;
> > +};
> 
> The '_hw' suffix is a bit unfortunate, as there is mostly SW
> constructs
> in this structure. Maybe something more general like 'context' would
> be more appropriate.
> 

Sure. I will rename it to something more meaningful.

> >  struct plic_handler {
> >  	bool			present;
> > @@ -66,6 +70,7 @@ struct plic_handler {
> >  	 */
> >  	raw_spinlock_t		enable_lock;
> >  	void __iomem		*enable_base;
> > +	struct plic_hw		*hw;
> >  };
> >  static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
> > 
> > @@ -84,31 +89,40 @@ static inline void plic_toggle(struct
> > plic_handler *handler,
> >  }
> > 
> >  static inline void plic_irq_toggle(const struct cpumask *mask,
> > -				   int hwirq, int enable)
> > +				   struct irq_data *d, int enable)
> >  {
> >  	int cpu;
> > +	struct plic_hw *hw = d->domain->host_data;
> 
> The usual construct is to transfer the domain->host_data pointer to
> the irq_data->chip_data pointer at map() time, using 
> irq_set_chip_data().
> 
> You can then retrieve the pointer with irq_get_chip_data(), and save
> yourselves some pointer chasing.
> 

Sure. I will do that.

> > -	writel(enable, plic_regs + PRIORITY_BASE + hwirq * 
> > PRIORITY_PER_ID);
> > +	writel(enable, hw->regs + PRIORITY_BASE + d->hwirq * 
> > PRIORITY_PER_ID);
> >  	for_each_cpu(cpu, mask) {
> >  		struct plic_handler *handler =
> > per_cpu_ptr(&plic_handlers, cpu);
> > 
> > -		if (handler->present)
> > -			plic_toggle(handler, hwirq, enable);
> > +		if (handler->present &&
> > +		    cpumask_test_cpu(cpu, &handler->hw->lmask))
> > +			plic_toggle(handler, d->hwirq, enable);
> >  	}
> >  }
> > 
> >  static void plic_irq_enable(struct irq_data *d)
> >  {
> > -	unsigned int cpu =
> > cpumask_any_and(irq_data_get_affinity_mask(d),
> > -					   cpu_online_mask);
> > +	struct cpumask amask;
> > +	unsigned int cpu;
> > +	struct plic_hw *hw = d->domain->host_data;
> > +
> > +	cpumask_and(&amask, &hw->lmask, cpu_online_mask);
> > +	cpu = cpumask_any_and(irq_data_get_affinity_mask(d),
> > +					   &amask);
> >  	if (WARN_ON_ONCE(cpu >= nr_cpu_ids))
> >  		return;
> > -	plic_irq_toggle(cpumask_of(cpu), d->hwirq, 1);
> > +	plic_irq_toggle(cpumask_of(cpu), d, 1);
> >  }
> > 
> >  static void plic_irq_disable(struct irq_data *d)
> >  {
> > -	plic_irq_toggle(cpu_possible_mask, d->hwirq, 0);
> > +	struct plic_hw *hw = d->domain->host_data;
> > +
> > +	plic_irq_toggle(&hw->lmask, d, 0);
> >  }
> > 
> >  #ifdef CONFIG_SMP
> > @@ -116,18 +130,22 @@ static int plic_set_affinity(struct irq_data 
> > *d,
> >  			     const struct cpumask *mask_val, bool
> > force)
> >  {
> >  	unsigned int cpu;
> > +	struct cpumask amask;
> > +	struct plic_hw *hw = d->domain->host_data;
> > +
> > +	cpumask_and(&amask, &hw->lmask, mask_val);
> 
> So this means that an interrupt cannot move between sockets?

Unfortunately, that's correct for the first version of the experimental
platform. Hopefully, future platforms will have better support.

> How is that going to work with CPU hotplug? This seems like
> a pretty bad restriction for anything but the most basic
> experimental platform.
> 
> >  	if (force)
> > -		cpu = cpumask_first(mask_val);
> > +		cpu = cpumask_first(&amask);
> >  	else
> > -		cpu = cpumask_any_and(mask_val, cpu_online_mask);
> > +		cpu = cpumask_any_and(&amask, cpu_online_mask);
> > 
> >  	if (cpu >= nr_cpu_ids)
> >  		return -EINVAL;
> > 
> >  	if (!irqd_irq_disabled(d)) {
> > -		plic_irq_toggle(cpu_possible_mask, d->hwirq, 0);
> > -		plic_irq_toggle(cpumask_of(cpu), d->hwirq, 1);
> > +		plic_irq_toggle(&hw->lmask, d, 0);
> > +		plic_irq_toggle(cpumask_of(cpu), d, 1);
> >  	}
> > 
> >  	irq_data_update_effective_affinity(d, cpumask_of(cpu));
> > @@ -163,8 +181,6 @@ static const struct irq_domain_ops 
> > plic_irqdomain_ops = {
> >  	.xlate		= irq_domain_xlate_onecell,
> >  };
> > 
> > -static struct irq_domain *plic_irqdomain;
> > -
> >  /*
> >   * Handling an interrupt is a two-step process: first you claim
> > the
> > interrupt
> >   * by reading the claim register, then you complete the interrupt
> > by 
> > writing
> > @@ -181,7 +197,7 @@ static void plic_handle_irq(struct pt_regs
> > *regs)
> > 
> >  	csr_clear(sie, SIE_SEIE);
> >  	while ((hwirq = readl(claim))) {
> > -		int irq = irq_find_mapping(plic_irqdomain, hwirq);
> > +		int irq = irq_find_mapping(handler->hw->irqdomain,
> > hwirq);
> > 
> >  		if (unlikely(irq <= 0))
> >  			pr_warn_ratelimited("can't find mapping for
> > hwirq %lu\n",
> > @@ -212,15 +228,17 @@ static int __init plic_init(struct
> > device_node 
> > *node,
> >  {
> >  	int error = 0, nr_contexts, nr_handlers = 0, i;
> >  	u32 nr_irqs;
> > +	struct plic_hw *hw;
> > 
> > -	if (plic_regs) {
> > -		pr_warn("PLIC already present.\n");
> > -		return -ENXIO;
> > -	}
> > +	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
> > +	if (!hw)
> > +		return -ENOMEM;
> > 
> > -	plic_regs = of_iomap(node, 0);
> > -	if (WARN_ON(!plic_regs))
> > -		return -EIO;
> > +	hw->regs = of_iomap(node, 0);
> > +	if (WARN_ON(!hw->regs)) {
> > +		error = -EIO;
> > +		goto out_freehw;
> > +	}
> > 
> >  	error = -EINVAL;
> >  	of_property_read_u32(node, "riscv,ndev", &nr_irqs);
> > @@ -234,9 +252,9 @@ static int __init plic_init(struct device_node 
> > *node,
> >  		goto out_iounmap;
> > 
> >  	error = -ENOMEM;
> > -	plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
> > -			&plic_irqdomain_ops, NULL);
> > -	if (WARN_ON(!plic_irqdomain))
> > +	hw->irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
> > +			&plic_irqdomain_ops, hw);
> > +	if (WARN_ON(!hw->irqdomain))
> >  		goto out_iounmap;
> > 
> >  	for (i = 0; i < nr_contexts; i++) {
> > @@ -279,13 +297,14 @@ static int __init plic_init(struct
> > device_node 
> > *node,
> >  			goto done;
> >  		}
> > 
> > +		cpumask_set_cpu(cpu, &hw->lmask);
> >  		handler->present = true;
> >  		handler->hart_base =
> > -			plic_regs + CONTEXT_BASE + i *
> > CONTEXT_PER_HART;
> > +			hw->regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
> >  		raw_spin_lock_init(&handler->enable_lock);
> >  		handler->enable_base =
> > -			plic_regs + ENABLE_BASE + i * ENABLE_PER_HART;
> > -
> > +			hw->regs + ENABLE_BASE + i * ENABLE_PER_HART;
> > +		handler->hw = hw;
> >  done:
> >  		/* priority must be > threshold to trigger an interrupt
> > */
> >  		writel(threshold, handler->hart_base +
> > CONTEXT_THRESHOLD);
> > @@ -300,7 +319,9 @@ static int __init plic_init(struct device_node 
> > *node,
> >  	return 0;
> > 
> >  out_iounmap:
> > -	iounmap(plic_regs);
> > +	iounmap(hw->regs);
> > +out_freehw:
> > +	kfree(hw);
> >  	return error;
> >  }
> 
> This otherwise seems like a very straightforward change.
> 
Thanks for the review. I will send out the v2 soon.

> Thanks,
> 
>          M.

-- 
Regards,
Atish