Linux-RISC-V Archive on lore.kernel.org
 help / color / Atom feed
From: "Björn Töpel" <bjorn.topel@gmail.com>
To: daniel@iogearbox.net, ast@kernel.org, netdev@vger.kernel.org
Cc: "Björn Töpel" <bjorn.topel@gmail.com>,
	linux-riscv@lists.infradead.org, bpf@vger.kernel.org
Subject: [PATCH bpf-next v2 0/9] riscv: BPF JIT fix, optimizations and far jumps support
Date: Mon, 16 Dec 2019 10:13:34 +0100
Message-ID: <20191216091343.23260-1-bjorn.topel@gmail.com> (raw)

Hi!

This series contain one non-critical fix, support for far jumps. and
some optimizations for the BPF JIT.

Previously, the JIT only supported 12b branch targets for conditional
branches, and 21b for unconditional branches. Starting with this
series, 32b branching is supported.

As part of supporting far jumps, branch relaxation was introduced. The
idea is to start with a pessimistic jump (e.g. auipc/jalr) and for
each pass the JIT will have an opportunity to pick a better
instruction (e.g. jal) and shrink the image. Instead of two passes,
the JIT requires more passes. It typically converges after 3 passes.

The optimizations mentioned in the subject are for calls and tail
calls. In the tail call generation we can save one instruction by
using the offset in jalr. Calls are optimized by doing (auipc)/jal(r)
relative jumps instead of loading the entire absolute address and
doing jalr. This required that the JIT image allocator was made RISC-V
specific, so we can ensure that the JIT image and the kernel text are
in range (32b).

The last two patches of the series is not critical to the series, but
are two UAPI build issues for BPF events. A closer look from the
RV-folks would be much appreciated.

The test_bpf.ko module, selftests/bpf/test_verifier and
selftests/seccomp/seccomp_bpf pass all tests.

RISC-V is still missing proper kprobe and tracepoint support, so a lot
of BPF selftests cannot be run.


Thanks,
Björn

v1->v2: [1]
 * Removed unused function parameter from emit_branch()
 * Added patch to support far branch in tail call emit

[1] https://lore.kernel.org/bpf/20191209173136.29615-1-bjorn.topel@gmail.com/


Björn Töpel (9):
  riscv, bpf: fix broken BPF tail calls
  riscv, bpf: add support for far branching
  riscv, bpf: add support for far branching when emitting tail call
  riscv, bpf: add support for far jumps and exits
  riscv, bpf: optimize BPF tail calls
  riscv, bpf: provide RISC-V specific JIT image alloc/free
  riscv, bpf: optimize calls
  riscv, bpf: add missing uapi header for BPF_PROG_TYPE_PERF_EVENT
    programs
  riscv, perf: add arch specific perf_arch_bpf_user_pt_regs

 arch/riscv/include/asm/perf_event.h          |   4 +
 arch/riscv/include/asm/pgtable.h             |   4 +
 arch/riscv/include/uapi/asm/bpf_perf_event.h |   9 +
 arch/riscv/net/bpf_jit_comp.c                | 531 ++++++++++---------
 tools/include/uapi/asm/bpf_perf_event.h      |   2 +
 5 files changed, 312 insertions(+), 238 deletions(-)
 create mode 100644 arch/riscv/include/uapi/asm/bpf_perf_event.h

-- 
2.20.1



             reply index

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-16  9:13 Björn Töpel [this message]
2019-12-16  9:13 ` [PATCH bpf-next v2 1/9] riscv, bpf: fix broken BPF tail calls Björn Töpel
2019-12-16  9:13 ` [PATCH bpf-next v2 2/9] riscv, bpf: add support for far branching Björn Töpel
2019-12-16  9:13 ` [PATCH bpf-next v2 3/9] riscv, bpf: add support for far branching when emitting tail call Björn Töpel
2019-12-16  9:13 ` [PATCH bpf-next v2 4/9] riscv, bpf: add support for far jumps and exits Björn Töpel
2019-12-16  9:13 ` [PATCH bpf-next v2 5/9] riscv, bpf: optimize BPF tail calls Björn Töpel
2019-12-16  9:13 ` [PATCH bpf-next v2 6/9] riscv, bpf: provide RISC-V specific JIT image alloc/free Björn Töpel
2019-12-16 15:09   ` Daniel Borkmann
2019-12-18  6:23     ` Björn Töpel
2020-01-04  1:32       ` Paul Walmsley
2020-01-07 10:24         ` Björn Töpel
2020-01-07 10:47           ` Paul Walmsley
2020-02-02 13:37   ` Alex Ghiti
2020-02-03 12:28     ` Björn Töpel
2020-02-03 20:57       ` Alex Ghiti
2019-12-16  9:13 ` [PATCH bpf-next v2 7/9] riscv, bpf: optimize calls Björn Töpel
2019-12-16  9:13 ` [PATCH bpf-next v2 8/9] riscv, bpf: add missing uapi header for BPF_PROG_TYPE_PERF_EVENT programs Björn Töpel
2019-12-16  9:13 ` [PATCH bpf-next v2 9/9] riscv, perf: add arch specific perf_arch_bpf_user_pt_regs Björn Töpel
2019-12-19 15:07 ` [PATCH bpf-next v2 0/9] riscv: BPF JIT fix, optimizations and far jumps support Daniel Borkmann
2019-12-19 22:02 ` [PATCH bpf-next v2 1/9] riscv, bpf: fix broken BPF tail calls Palmer Dabbelt
2019-12-23 18:03 ` [PATCH bpf-next v2 2/9] riscv, bpf: add support for far branching Palmer Dabbelt
2020-01-07  8:13   ` Björn Töpel
2020-01-23  2:08   ` Palmer Dabbelt
2019-12-23 18:18 ` [PATCH bpf-next v2 3/9] riscv, bpf: add support for far branching when emitting tail call Palmer Dabbelt
2019-12-23 18:18 ` [PATCH bpf-next v2 4/9] riscv, bpf: add support for far jumps and exits Palmer Dabbelt
2019-12-23 18:29 ` [PATCH bpf-next v2 5/9] riscv, bpf: optimize BPF tail calls Palmer Dabbelt
2019-12-23 18:30 ` [PATCH bpf-next v2 6/9] riscv, bpf: provide RISC-V specific JIT image alloc/free Palmer Dabbelt
2019-12-23 18:58 ` [PATCH bpf-next v2 7/9] riscv, bpf: optimize calls Palmer Dabbelt
2020-01-07 10:14   ` Björn Töpel
2020-01-28  2:15   ` Palmer Dabbelt
2020-02-03 12:11     ` Björn Töpel
2019-12-23 18:58 ` [PATCH bpf-next v2 8/9] riscv, bpf: add missing uapi header for BPF_PROG_TYPE_PERF_EVENT programs Palmer Dabbelt
2019-12-23 18:58 ` [PATCH bpf-next v2 9/9] riscv, perf: add arch specific perf_arch_bpf_user_pt_regs Palmer Dabbelt

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191216091343.23260-1-bjorn.topel@gmail.com \
    --to=bjorn.topel@gmail.com \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=linux-riscv@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org
	public-inbox-index linux-riscv

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git