linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v5 0/4] Dedicated CLINT timer driver
@ 2020-07-23 14:24 Anup Patel
  2020-07-23 14:24 ` [PATCH v5 1/4] RISC-V: Add mechanism to provide custom IPI operations Anup Patel
                   ` (3 more replies)
  0 siblings, 4 replies; 9+ messages in thread
From: Anup Patel @ 2020-07-23 14:24 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Albert Ou, Rob Herring,
	Daniel Lezcano, Thomas Gleixner
  Cc: devicetree, Damien Le Moal, Anup Patel, Anup Patel, linux-kernel,
	Atish Patra, Alistair Francis, linux-riscv

The current RISC-V timer driver is convoluted and implements two
distinct timers:
 1. S-mode timer: This is for Linux RISC-V S-mode with MMU. The
    clocksource is implemented using TIME CSR and clockevent device
    is implemented using SBI Timer calls.
 2. M-mode timer: This is for Linux RISC-V M-mode without MMU. The
    clocksource is implemented using CLINT MMIO time register and
    clockevent device is implemented using CLINT MMIO timecmp registers.

This patchset removes clint related code from RISC-V timer driver and
arch/riscv directory. Instead, the series adds a dedicated MMIO based
CLINT driver under drivers/clocksource directory which can be used by
Linux RISC-V M-mode (i.e NoMMU Linux RISC-V).

The patchset is based up Linux-5.8-rc6 and can be found at riscv_clint_v5
branch of: https://github.com/avpatel/linux.git

This series is tested on:
 1. QEMU RV64 virt machine using Linux RISC-V S-mode
 2. QEMU RV32 virt machine using Linux RISC-V S-mode
 3. QEMU RV64 virt machine using Linux RISC-V M-mode (i.e. NoMMU)

Changes since v4:
 - Rebased series on Linux-5.8-rc6
 - Updated Kconfig option as suggested by Daniel in PATCH2
 - Removed per-CPU registered flag in PATCH2
 - Addressed nit comments from Atish in PATCH2

Changes since v3:
 - Updated commit description of PATCH2
 - Use clint_get_cycles64() in clint_rdtime() of PATCH2
 - Call clockevents_config_and_register() only once for each CPU in
   clint_timer_starting_cpu of PATCH2
 - Select CLINT timer driver from platform Kconfig in PATCH3
 - Fixed 'make dt_binding_check' for PATCH4

Changes since v2:
 - Rebased series on Linux-5.8-rc5
 - Squashed PATCH3 onto PATCH2 to preserve GIT bisectability
 - Moved PATCH4 before PATCH2 to preserve GIT bisectability
 - Replaced CLINT dt-bindings text document with YAML schema
 - Use SiFive CLINT compatible string as per SiFive IP block versioning

Changes since v1:
 - Rebased series on Linux-5.8-rc2
 - Added pr_warn() for case where ipi_ops not available in PATCH1
 - Updated ipi_inject() prototype to use "struct cpumask *" in PATCH1
 - Updated CLINT_TIMER kconfig option to depend on RISCV_M_MODE in PATCH4
 - Added riscv,clint0 compatible string in DT bindings document

Anup Patel (4):
  RISC-V: Add mechanism to provide custom IPI operations
  clocksource/drivers: Add CLINT timer driver
  RISC-V: Remove CLINT related code from timer and arch
  dt-bindings: timer: Add CLINT bindings

 .../bindings/timer/sifive,clint.yaml          |  58 +++++
 arch/riscv/Kconfig                            |   2 +-
 arch/riscv/Kconfig.socs                       |   2 +
 arch/riscv/configs/nommu_virt_defconfig       |   7 +-
 arch/riscv/include/asm/clint.h                |  39 ---
 arch/riscv/include/asm/smp.h                  |  19 ++
 arch/riscv/include/asm/timex.h                |  28 +--
 arch/riscv/kernel/Makefile                    |   2 +-
 arch/riscv/kernel/clint.c                     |  44 ----
 arch/riscv/kernel/sbi.c                       |  14 ++
 arch/riscv/kernel/setup.c                     |   2 -
 arch/riscv/kernel/smp.c                       |  44 ++--
 arch/riscv/kernel/smpboot.c                   |   4 +-
 drivers/clocksource/Kconfig                   |  12 +-
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-clint.c             | 226 ++++++++++++++++++
 drivers/clocksource/timer-riscv.c             |  17 +-
 include/linux/cpuhotplug.h                    |   1 +
 18 files changed, 369 insertions(+), 153 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/timer/sifive,clint.yaml
 delete mode 100644 arch/riscv/include/asm/clint.h
 delete mode 100644 arch/riscv/kernel/clint.c
 create mode 100644 drivers/clocksource/timer-clint.c

-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread
* [PATCH v5 1/4] RISC-V: Add mechanism to provide custom IPI operations
  2020-07-23 14:24 [PATCH v5 0/4] Dedicated CLINT timer driver Anup Patel
@ 2020-07-23 14:24 ` Anup Patel
  2020-07-23 14:24 ` [PATCH v5 2/4] clocksource/drivers: Add CLINT timer driver Anup Patel
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 9+ messages in thread
From: Anup Patel @ 2020-07-23 14:24 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Albert Ou, Rob Herring,
	Daniel Lezcano, Thomas Gleixner
  Cc: devicetree, Damien Le Moal, Emil Renner Berhing, Anup Patel,
	Anup Patel, linux-kernel, Atish Patra, Alistair Francis,
	linux-riscv

We add mechanism to set custom IPI operations so that CLINT driver
from drivers directory can provide custom IPI operations.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/include/asm/clint.h | 25 --------------------
 arch/riscv/include/asm/smp.h   | 19 +++++++++++++++
 arch/riscv/kernel/clint.c      | 23 ++++++++++++++++--
 arch/riscv/kernel/sbi.c        | 14 +++++++++++
 arch/riscv/kernel/smp.c        | 43 +++++++++++++++++++---------------
 arch/riscv/kernel/smpboot.c    |  3 +--
 6 files changed, 79 insertions(+), 48 deletions(-)

diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
index a279b17a6aad..adaba98a7d6c 100644
--- a/arch/riscv/include/asm/clint.h
+++ b/arch/riscv/include/asm/clint.h
@@ -6,34 +6,9 @@
 #include <linux/smp.h>
 
 #ifdef CONFIG_RISCV_M_MODE
-extern u32 __iomem *clint_ipi_base;
-
 void clint_init_boot_cpu(void);
-
-static inline void clint_send_ipi_single(unsigned long hartid)
-{
-	writel(1, clint_ipi_base + hartid);
-}
-
-static inline void clint_send_ipi_mask(const struct cpumask *mask)
-{
-	int cpu;
-
-	for_each_cpu(cpu, mask)
-		clint_send_ipi_single(cpuid_to_hartid_map(cpu));
-}
-
-static inline void clint_clear_ipi(unsigned long hartid)
-{
-	writel(0, clint_ipi_base + hartid);
-}
 #else /* CONFIG_RISCV_M_MODE */
 #define clint_init_boot_cpu()	do { } while (0)
-
-/* stubs to for code is only reachable under IS_ENABLED(CONFIG_RISCV_M_MODE): */
-void clint_send_ipi_single(unsigned long hartid);
-void clint_send_ipi_mask(const struct cpumask *hartid_mask);
-void clint_clear_ipi(unsigned long hartid);
 #endif /* CONFIG_RISCV_M_MODE */
 
 #endif /* _ASM_RISCV_CLINT_H */
diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 40bb1c15a731..68de78a8eba6 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -15,6 +15,11 @@
 struct seq_file;
 extern unsigned long boot_cpu_hartid;
 
+struct riscv_ipi_ops {
+	void (*ipi_inject)(const struct cpumask *target);
+	void (*ipi_clear)(void);
+};
+
 #ifdef CONFIG_SMP
 /*
  * Mapping between linux logical cpu index and hartid.
@@ -40,6 +45,12 @@ void arch_send_call_function_single_ipi(int cpu);
 int riscv_hartid_to_cpuid(int hartid);
 void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
 
+/* Set custom IPI operations */
+void riscv_set_ipi_ops(struct riscv_ipi_ops *ops);
+
+/* Clear IPI for current CPU */
+void riscv_clear_ipi(void);
+
 /*
  * Obtains the hart ID of the currently executing task.  This relies on
  * THREAD_INFO_IN_TASK, but we define that unconditionally.
@@ -78,6 +89,14 @@ static inline void riscv_cpuid_to_hartid_mask(const struct cpumask *in,
 	cpumask_set_cpu(boot_cpu_hartid, out);
 }
 
+static inline void riscv_set_ipi_ops(struct riscv_ipi_ops *ops)
+{
+}
+
+static inline void riscv_clear_ipi(void)
+{
+}
+
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP)
diff --git a/arch/riscv/kernel/clint.c b/arch/riscv/kernel/clint.c
index 3647980d14c3..a9845ee023e2 100644
--- a/arch/riscv/kernel/clint.c
+++ b/arch/riscv/kernel/clint.c
@@ -5,11 +5,11 @@
 
 #include <linux/io.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 #include <linux/types.h>
 #include <asm/clint.h>
 #include <asm/csr.h>
 #include <asm/timex.h>
-#include <asm/smp.h>
 
 /*
  * This is the layout used by the SiFive clint, which is also shared by the qemu
@@ -21,6 +21,24 @@
 
 u32 __iomem *clint_ipi_base;
 
+static void clint_send_ipi(const struct cpumask *target)
+{
+	unsigned int cpu;
+
+	for_each_cpu(cpu, target)
+		writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
+}
+
+static void clint_clear_ipi(void)
+{
+	writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
+}
+
+static struct riscv_ipi_ops clint_ipi_ops = {
+	.ipi_inject = clint_send_ipi,
+	.ipi_clear = clint_clear_ipi,
+};
+
 void clint_init_boot_cpu(void)
 {
 	struct device_node *np;
@@ -40,5 +58,6 @@ void clint_init_boot_cpu(void)
 	riscv_time_cmp = base + CLINT_TIME_CMP_OFF;
 	riscv_time_val = base + CLINT_TIME_VAL_OFF;
 
-	clint_clear_ipi(boot_cpu_hartid);
+	clint_clear_ipi();
+	riscv_set_ipi_ops(&clint_ipi_ops);
 }
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index f383ef5672b2..226ccce0f9e0 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -547,6 +547,18 @@ static inline long sbi_get_firmware_version(void)
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_IMP_VERSION);
 }
 
+static void sbi_send_cpumask_ipi(const struct cpumask *target)
+{
+	struct cpumask hartid_mask;
+
+	riscv_cpuid_to_hartid_mask(target, &hartid_mask);
+
+	sbi_send_ipi(cpumask_bits(&hartid_mask));
+}
+
+static struct riscv_ipi_ops sbi_ipi_ops = {
+	.ipi_inject = sbi_send_cpumask_ipi
+};
 
 int __init sbi_init(void)
 {
@@ -587,5 +599,7 @@ int __init sbi_init(void)
 		__sbi_rfence	= __sbi_rfence_v01;
 	}
 
+	riscv_set_ipi_ops(&sbi_ipi_ops);
+
 	return 0;
 }
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index b1d4f452f843..8b85683ce203 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -84,9 +84,25 @@ static void ipi_stop(void)
 		wait_for_interrupt();
 }
 
+static struct riscv_ipi_ops *ipi_ops;
+
+void riscv_set_ipi_ops(struct riscv_ipi_ops *ops)
+{
+	ipi_ops = ops;
+}
+EXPORT_SYMBOL_GPL(riscv_set_ipi_ops);
+
+void riscv_clear_ipi(void)
+{
+	if (ipi_ops && ipi_ops->ipi_clear)
+		ipi_ops->ipi_clear();
+
+	csr_clear(CSR_IP, IE_SIE);
+}
+EXPORT_SYMBOL_GPL(riscv_clear_ipi);
+
 static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op)
 {
-	struct cpumask hartid_mask;
 	int cpu;
 
 	smp_mb__before_atomic();
@@ -94,33 +110,22 @@ static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op)
 		set_bit(op, &ipi_data[cpu].bits);
 	smp_mb__after_atomic();
 
-	riscv_cpuid_to_hartid_mask(mask, &hartid_mask);
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
-		sbi_send_ipi(cpumask_bits(&hartid_mask));
+	if (ipi_ops && ipi_ops->ipi_inject)
+		ipi_ops->ipi_inject(mask);
 	else
-		clint_send_ipi_mask(mask);
+		pr_warn("SMP: IPI inject method not available\n");
 }
 
 static void send_ipi_single(int cpu, enum ipi_message_type op)
 {
-	int hartid = cpuid_to_hartid_map(cpu);
-
 	smp_mb__before_atomic();
 	set_bit(op, &ipi_data[cpu].bits);
 	smp_mb__after_atomic();
 
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
-		sbi_send_ipi(cpumask_bits(cpumask_of(hartid)));
-	else
-		clint_send_ipi_single(hartid);
-}
-
-static inline void clear_ipi(void)
-{
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
-		csr_clear(CSR_IP, IE_SIE);
+	if (ipi_ops && ipi_ops->ipi_inject)
+		ipi_ops->ipi_inject(cpumask_of(cpu));
 	else
-		clint_clear_ipi(cpuid_to_hartid_map(smp_processor_id()));
+		pr_warn("SMP: IPI inject method not available\n");
 }
 
 void handle_IPI(struct pt_regs *regs)
@@ -131,7 +136,7 @@ void handle_IPI(struct pt_regs *regs)
 
 	irq_enter();
 
-	clear_ipi();
+	riscv_clear_ipi();
 
 	while (true) {
 		unsigned long ops;
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 4e9922790f6e..5fe849791bf0 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -147,8 +147,7 @@ asmlinkage __visible void smp_callin(void)
 {
 	struct mm_struct *mm = &init_mm;
 
-	if (!IS_ENABLED(CONFIG_RISCV_SBI))
-		clint_clear_ipi(cpuid_to_hartid_map(smp_processor_id()));
+	riscv_clear_ipi();
 
 	/* All kernel threads share the same mm context.  */
 	mmgrab(mm);
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 9+ messages in thread
* [PATCH v5 2/4] clocksource/drivers: Add CLINT timer driver
  2020-07-23 14:24 [PATCH v5 0/4] Dedicated CLINT timer driver Anup Patel
  2020-07-23 14:24 ` [PATCH v5 1/4] RISC-V: Add mechanism to provide custom IPI operations Anup Patel
@ 2020-07-23 14:24 ` Anup Patel
  2020-07-23 14:34   ` Daniel Lezcano
  2020-07-23 14:24 ` [PATCH v5 3/4] RISC-V: Remove CLINT related code from timer and arch Anup Patel
  2020-07-23 14:24 ` [PATCH v5 4/4] dt-bindings: timer: Add CLINT bindings Anup Patel
  3 siblings, 1 reply; 9+ messages in thread
From: Anup Patel @ 2020-07-23 14:24 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Albert Ou, Rob Herring,
	Daniel Lezcano, Thomas Gleixner
  Cc: devicetree, Damien Le Moal, Emil Renner Berhing, Anup Patel,
	Anup Patel, linux-kernel, Atish Patra, Alistair Francis,
	linux-riscv

We add a separate CLINT timer driver for Linux RISC-V M-mode (i.e.
RISC-V NoMMU kernel).

The CLINT MMIO device provides three things:
1. 64bit free running counter register
2. 64bit per-CPU time compare registers
3. 32bit per-CPU inter-processor interrupt registers

Unlike other timer devices, CLINT provides IPI registers along with
timer registers. To use CLINT IPI registers, the CLINT timer driver
provides IPI related callbacks to arch/riscv.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
---
 drivers/clocksource/Kconfig       |   9 ++
 drivers/clocksource/Makefile      |   1 +
 drivers/clocksource/timer-clint.c | 226 ++++++++++++++++++++++++++++++
 include/linux/cpuhotplug.h        |   1 +
 4 files changed, 237 insertions(+)
 create mode 100644 drivers/clocksource/timer-clint.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 91418381fcd4..41f1c147c178 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -658,6 +658,15 @@ config RISCV_TIMER
 	  is accessed via both the SBI and the rdcycle instruction.  This is
 	  required for all RISC-V systems.
 
+config CLINT_TIMER
+	bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
+	depends on GENERIC_SCHED_CLOCK && RISCV
+	select TIMER_PROBE
+	select TIMER_OF
+	help
+	  This option enables the CLINT timer for RISC-V systems.  The CLINT
+	  driver is usually used for NoMMU RISC-V systems.
+
 config CSKY_MP_TIMER
 	bool "SMP Timer for the C-SKY platform" if COMPILE_TEST
 	depends on CSKY
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index bdda1a2e4097..18e700e703a0 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
 obj-$(CONFIG_ATCPIT100_TIMER)		+= timer-atcpit100.o
 obj-$(CONFIG_RISCV_TIMER)		+= timer-riscv.o
+obj-$(CONFIG_CLINT_TIMER)		+= timer-clint.o
 obj-$(CONFIG_CSKY_MP_TIMER)		+= timer-mp-csky.o
 obj-$(CONFIG_GX6605S_TIMER)		+= timer-gx6605s.o
 obj-$(CONFIG_HYPERV_TIMER)		+= hyperv_timer.o
diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
new file mode 100644
index 000000000000..8eeafa82c03d
--- /dev/null
+++ b/drivers/clocksource/timer-clint.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ *
+ * Most of the M-mode (i.e. NoMMU) RISC-V systems usually have a
+ * CLINT MMIO timer device.
+ */
+
+#define pr_fmt(fmt) "clint: " fmt
+#include <linux/bitops.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/sched_clock.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/smp.h>
+
+#define CLINT_IPI_OFF		0
+#define CLINT_TIMER_CMP_OFF	0x4000
+#define CLINT_TIMER_VAL_OFF	0xbff8
+
+/* CLINT manages IPI and Timer for RISC-V M-mode  */
+static u32 __iomem *clint_ipi_base;
+static u64 __iomem *clint_timer_cmp;
+static u64 __iomem *clint_timer_val;
+static unsigned long clint_timer_freq;
+static unsigned int clint_timer_irq;
+
+static void clint_send_ipi(const struct cpumask *target)
+{
+	unsigned int cpu;
+
+	for_each_cpu(cpu, target)
+		writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
+}
+
+static void clint_clear_ipi(void)
+{
+	writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
+}
+
+static struct riscv_ipi_ops clint_ipi_ops = {
+	.ipi_inject = clint_send_ipi,
+	.ipi_clear = clint_clear_ipi,
+};
+
+#ifdef CONFIG_64BIT
+#define clint_get_cycles()	readq_relaxed(clint_timer_val)
+#else
+#define clint_get_cycles()	readl_relaxed(clint_timer_val)
+#define clint_get_cycles_hi()	readl_relaxed(((u32 *)clint_timer_val) + 1)
+#endif
+
+#ifdef CONFIG_64BIT
+static u64 notrace clint_get_cycles64(void)
+{
+	return clint_get_cycles();
+}
+#else /* CONFIG_64BIT */
+static u64 notrace clint_get_cycles64(void)
+{
+	u32 hi, lo;
+
+	do {
+		hi = clint_get_cycles_hi();
+		lo = clint_get_cycles();
+	} while (hi != clint_get_cycles_hi());
+
+	return ((u64)hi << 32) | lo;
+}
+#endif /* CONFIG_64BIT */
+
+static u64 clint_rdtime(struct clocksource *cs)
+{
+	return clint_get_cycles64();
+}
+
+static struct clocksource clint_clocksource = {
+	.name		= "clint_clocksource",
+	.rating		= 300,
+	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.read		= clint_rdtime,
+};
+
+static int clint_clock_next_event(unsigned long delta,
+				   struct clock_event_device *ce)
+{
+	void __iomem *r = clint_timer_cmp +
+			  cpuid_to_hartid_map(smp_processor_id());
+
+	csr_set(CSR_IE, IE_TIE);
+	writeq_relaxed(clint_get_cycles64() + delta, r);
+	return 0;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, clint_clock_event) = {
+	.name		= "clint_clockevent",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 100,
+	.set_next_event	= clint_clock_next_event,
+};
+
+static int clint_timer_starting_cpu(unsigned int cpu)
+{
+	struct clock_event_device *ce = per_cpu_ptr(&clint_clock_event, cpu);
+
+	ce->cpumask = cpumask_of(cpu);
+	clockevents_config_and_register(ce, clint_timer_freq, 100, 0x7fffffff);
+
+	enable_percpu_irq(clint_timer_irq,
+			  irq_get_trigger_type(clint_timer_irq));
+	return 0;
+}
+
+static int clint_timer_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(clint_timer_irq);
+	return 0;
+}
+
+static irqreturn_t clint_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evdev = this_cpu_ptr(&clint_clock_event);
+
+	csr_clear(CSR_IE, IE_TIE);
+	evdev->event_handler(evdev);
+
+	return IRQ_HANDLED;
+}
+
+static int __init clint_timer_init_dt(struct device_node *np)
+{
+	int rc;
+	u32 i, nr_irqs;
+	void __iomem *base;
+	struct of_phandle_args oirq;
+
+	/*
+	 * Ensure that CLINT device interrupts are either RV_IRQ_TIMER or
+	 * RV_IRQ_SOFT. If it's anything else then we ignore the device.
+	 */
+	nr_irqs = of_irq_count(np);
+	for (i = 0; i < nr_irqs; i++) {
+		if (of_irq_parse_one(np, i, &oirq)) {
+			pr_err("%pOFP: failed to parse irq %d.\n", np, i);
+			continue;
+		}
+
+		if ((oirq.args_count != 1) ||
+		    (oirq.args[0] != RV_IRQ_TIMER &&
+		     oirq.args[0] != RV_IRQ_SOFT)) {
+			pr_err("%pOFP: invalid irq %d (hwirq %d)\n",
+			       np, i, oirq.args[0]);
+			return -ENODEV;
+		}
+
+		/* Find parent irq domain and map timer irq */
+		if (!clint_timer_irq &&
+		    oirq.args[0] == RV_IRQ_TIMER &&
+		    irq_find_host(oirq.np))
+			clint_timer_irq = irq_of_parse_and_map(np, i);
+	}
+
+	/* If CLINT timer irq not found then fail */
+	if (!clint_timer_irq) {
+		pr_err("%pOFP: timer irq not found\n", np);
+		return -ENODEV;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_err("%pOFP: could not map registers\n", np);
+		return -ENODEV;
+	}
+
+	clint_ipi_base = base + CLINT_IPI_OFF;
+	clint_timer_cmp = base + CLINT_TIMER_CMP_OFF;
+	clint_timer_val = base + CLINT_TIMER_VAL_OFF;
+	clint_timer_freq = riscv_timebase;
+
+	pr_info("%pOFP: timer running at %ld Hz\n", np, clint_timer_freq);
+
+	rc = clocksource_register_hz(&clint_clocksource, clint_timer_freq);
+	if (rc) {
+		pr_err("%pOFP: clocksource register failed [%d]\n", np, rc);
+		goto fail_iounmap;
+	}
+
+	sched_clock_register(clint_get_cycles64, 64, clint_timer_freq);
+
+	rc = request_percpu_irq(clint_timer_irq, clint_timer_interrupt,
+				 "clint-timer", &clint_clock_event);
+	if (rc) {
+		pr_err("registering percpu irq failed [%d]\n", rc);
+		goto fail_iounmap;
+	}
+
+	rc = cpuhp_setup_state(CPUHP_AP_CLINT_TIMER_STARTING,
+				"clockevents/clint/timer:starting",
+				clint_timer_starting_cpu,
+				clint_timer_dying_cpu);
+	if (rc) {
+		pr_err("%pOFP: cpuhp setup state failed [%d]\n", np, rc);
+		goto fail_free_irq;
+	}
+
+	riscv_set_ipi_ops(&clint_ipi_ops);
+	clint_clear_ipi();
+
+	return 0;
+
+fail_free_irq:
+	free_irq(clint_timer_irq, &clint_clock_event);
+fail_iounmap:
+	iounmap(base);
+	return rc;
+}
+
+TIMER_OF_DECLARE(clint_timer, "riscv,clint0", clint_timer_init_dt);
+TIMER_OF_DECLARE(clint_timer1, "sifive,clint0", clint_timer_init_dt);
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 191772d4a4d7..1451f4625833 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -132,6 +132,7 @@ enum cpuhp_state {
 	CPUHP_AP_MIPS_GIC_TIMER_STARTING,
 	CPUHP_AP_ARC_TIMER_STARTING,
 	CPUHP_AP_RISCV_TIMER_STARTING,
+	CPUHP_AP_CLINT_TIMER_STARTING,
 	CPUHP_AP_CSKY_TIMER_STARTING,
 	CPUHP_AP_HYPERV_TIMER_STARTING,
 	CPUHP_AP_KVM_STARTING,
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 9+ messages in thread
* [PATCH v5 3/4] RISC-V: Remove CLINT related code from timer and arch
  2020-07-23 14:24 [PATCH v5 0/4] Dedicated CLINT timer driver Anup Patel
  2020-07-23 14:24 ` [PATCH v5 1/4] RISC-V: Add mechanism to provide custom IPI operations Anup Patel
  2020-07-23 14:24 ` [PATCH v5 2/4] clocksource/drivers: Add CLINT timer driver Anup Patel
@ 2020-07-23 14:24 ` Anup Patel
  2020-07-23 14:35   ` Daniel Lezcano
  2020-07-23 14:24 ` [PATCH v5 4/4] dt-bindings: timer: Add CLINT bindings Anup Patel
  3 siblings, 1 reply; 9+ messages in thread
From: Anup Patel @ 2020-07-23 14:24 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Albert Ou, Rob Herring,
	Daniel Lezcano, Thomas Gleixner
  Cc: devicetree, Damien Le Moal, Emil Renner Berhing, Anup Patel,
	Anup Patel, linux-kernel, Atish Patra, Alistair Francis,
	linux-riscv

Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
   clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
   counter register for clocksource and CLINT MMIO compare register
   for clockevent device.

We now have a separate CLINT timer driver which also provide CLINT
based IPI operations so let's remove CLINT MMIO related code from
arch/riscv directory and RISC-V timer driver.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
---
 arch/riscv/Kconfig                      |  2 +-
 arch/riscv/Kconfig.socs                 |  2 +
 arch/riscv/configs/nommu_virt_defconfig |  7 +--
 arch/riscv/include/asm/clint.h          | 14 ------
 arch/riscv/include/asm/timex.h          | 28 +++--------
 arch/riscv/kernel/Makefile              |  2 +-
 arch/riscv/kernel/clint.c               | 63 -------------------------
 arch/riscv/kernel/setup.c               |  2 -
 arch/riscv/kernel/smp.c                 |  1 -
 arch/riscv/kernel/smpboot.c             |  1 -
 drivers/clocksource/Kconfig             |  3 +-
 drivers/clocksource/timer-riscv.c       | 17 +------
 12 files changed, 16 insertions(+), 126 deletions(-)
 delete mode 100644 arch/riscv/include/asm/clint.h
 delete mode 100644 arch/riscv/kernel/clint.c

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index fedb4a72b29a..57a72ae23d10 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -74,7 +74,7 @@ config RISCV
 	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_MSI if PCI
 	select RISCV_INTC
-	select RISCV_TIMER
+	select RISCV_TIMER if RISCV_SBI
 	select SPARSEMEM_STATIC if 32BIT
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 6c88148f1b9b..8a55f6156661 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -12,6 +12,7 @@ config SOC_SIFIVE
 
 config SOC_VIRT
 	bool "QEMU Virt Machine"
+	select CLINT_TIMER if RISCV_M_MODE
 	select POWER_RESET
 	select POWER_RESET_SYSCON
 	select POWER_RESET_SYSCON_POWEROFF
@@ -24,6 +25,7 @@ config SOC_VIRT
 config SOC_KENDRYTE
 	bool "Kendryte K210 SoC"
 	depends on !MMU
+	select CLINT_TIMER if RISCV_M_MODE
 	select SERIAL_SIFIVE if TTY
 	select SERIAL_SIFIVE_CONSOLE if TTY
 	select SIFIVE_PLIC
diff --git a/arch/riscv/configs/nommu_virt_defconfig b/arch/riscv/configs/nommu_virt_defconfig
index cf74e179bf90..cf9388184aa3 100644
--- a/arch/riscv/configs/nommu_virt_defconfig
+++ b/arch/riscv/configs/nommu_virt_defconfig
@@ -26,6 +26,7 @@ CONFIG_EXPERT=y
 CONFIG_SLOB=y
 # CONFIG_SLAB_MERGE_DEFAULT is not set
 # CONFIG_MMU is not set
+CONFIG_SOC_VIRT=y
 CONFIG_MAXPHYSMEM_2GB=y
 CONFIG_SMP=y
 CONFIG_CMDLINE="root=/dev/vda rw earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0"
@@ -48,7 +49,6 @@ CONFIG_VIRTIO_BLK=y
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_LDISC_AUTOLOAD is not set
-# CONFIG_DEVMEM is not set
 CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -56,16 +56,13 @@ CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
+# CONFIG_DEVMEM is not set
 # CONFIG_HWMON is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_SIFIVE_PLIC=y
-# CONFIG_VALIDATE_FS_PARSER is not set
 CONFIG_EXT2_FS=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
deleted file mode 100644
index adaba98a7d6c..000000000000
--- a/arch/riscv/include/asm/clint.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_RISCV_CLINT_H
-#define _ASM_RISCV_CLINT_H 1
-
-#include <linux/io.h>
-#include <linux/smp.h>
-
-#ifdef CONFIG_RISCV_M_MODE
-void clint_init_boot_cpu(void);
-#else /* CONFIG_RISCV_M_MODE */
-#define clint_init_boot_cpu()	do { } while (0)
-#endif /* CONFIG_RISCV_M_MODE */
-
-#endif /* _ASM_RISCV_CLINT_H */
diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index bad2a7c2cda5..a3fb85d505d4 100644
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -7,41 +7,27 @@
 #define _ASM_RISCV_TIMEX_H
 
 #include <asm/csr.h>
-#include <asm/mmio.h>
 
 typedef unsigned long cycles_t;
 
-extern u64 __iomem *riscv_time_val;
-extern u64 __iomem *riscv_time_cmp;
-
-#ifdef CONFIG_64BIT
-#define mmio_get_cycles()	readq_relaxed(riscv_time_val)
-#else
-#define mmio_get_cycles()	readl_relaxed(riscv_time_val)
-#define mmio_get_cycles_hi()	readl_relaxed(((u32 *)riscv_time_val) + 1)
-#endif
-
 static inline cycles_t get_cycles(void)
 {
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
-		return csr_read(CSR_TIME);
-	return mmio_get_cycles();
+	return csr_read(CSR_TIME);
 }
 #define get_cycles get_cycles
 
+static inline u32 get_cycles_hi(void)
+{
+	return csr_read(CSR_TIMEH);
+}
+#define get_cycles_hi get_cycles_hi
+
 #ifdef CONFIG_64BIT
 static inline u64 get_cycles64(void)
 {
 	return get_cycles();
 }
 #else /* CONFIG_64BIT */
-static inline u32 get_cycles_hi(void)
-{
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
-		return csr_read(CSR_TIMEH);
-	return mmio_get_cycles_hi();
-}
-
 static inline u64 get_cycles64(void)
 {
 	u32 hi, lo;
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index b355cf485671..7edf15643146 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -31,7 +31,7 @@ obj-y	+= cacheinfo.o
 obj-y	+= patch.o
 obj-$(CONFIG_MMU) += vdso.o vdso/
 
-obj-$(CONFIG_RISCV_M_MODE)	+= clint.o traps_misaligned.o
+obj-$(CONFIG_RISCV_M_MODE)	+= traps_misaligned.o
 obj-$(CONFIG_FPU)		+= fpu.o
 obj-$(CONFIG_SMP)		+= smpboot.o
 obj-$(CONFIG_SMP)		+= smp.o
diff --git a/arch/riscv/kernel/clint.c b/arch/riscv/kernel/clint.c
deleted file mode 100644
index a9845ee023e2..000000000000
--- a/arch/riscv/kernel/clint.c
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 Christoph Hellwig.
- */
-
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/smp.h>
-#include <linux/types.h>
-#include <asm/clint.h>
-#include <asm/csr.h>
-#include <asm/timex.h>
-
-/*
- * This is the layout used by the SiFive clint, which is also shared by the qemu
- * virt platform, and the Kendryte KD210 at least.
- */
-#define CLINT_IPI_OFF		0
-#define CLINT_TIME_CMP_OFF	0x4000
-#define CLINT_TIME_VAL_OFF	0xbff8
-
-u32 __iomem *clint_ipi_base;
-
-static void clint_send_ipi(const struct cpumask *target)
-{
-	unsigned int cpu;
-
-	for_each_cpu(cpu, target)
-		writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
-}
-
-static void clint_clear_ipi(void)
-{
-	writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
-}
-
-static struct riscv_ipi_ops clint_ipi_ops = {
-	.ipi_inject = clint_send_ipi,
-	.ipi_clear = clint_clear_ipi,
-};
-
-void clint_init_boot_cpu(void)
-{
-	struct device_node *np;
-	void __iomem *base;
-
-	np = of_find_compatible_node(NULL, NULL, "riscv,clint0");
-	if (!np) {
-		panic("clint not found");
-		return;
-	}
-
-	base = of_iomap(np, 0);
-	if (!base)
-		panic("could not map CLINT");
-
-	clint_ipi_base = base + CLINT_IPI_OFF;
-	riscv_time_cmp = base + CLINT_TIME_CMP_OFF;
-	riscv_time_val = base + CLINT_TIME_VAL_OFF;
-
-	clint_clear_ipi();
-	riscv_set_ipi_ops(&clint_ipi_ops);
-}
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index f04373be54a6..2c6dd329312b 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -18,7 +18,6 @@
 #include <linux/swiotlb.h>
 #include <linux/smp.h>
 
-#include <asm/clint.h>
 #include <asm/cpu_ops.h>
 #include <asm/setup.h>
 #include <asm/sections.h>
@@ -79,7 +78,6 @@ void __init setup_arch(char **cmdline_p)
 #else
 	unflatten_device_tree();
 #endif
-	clint_init_boot_cpu();
 
 #ifdef CONFIG_SWIOTLB
 	swiotlb_init(1);
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 8b85683ce203..07626be78c23 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -17,7 +17,6 @@
 #include <linux/seq_file.h>
 #include <linux/delay.h>
 
-#include <asm/clint.h>
 #include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 5fe849791bf0..a6cfa9842d4b 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -24,7 +24,6 @@
 #include <linux/of.h>
 #include <linux/sched/task_stack.h>
 #include <linux/sched/mm.h>
-#include <asm/clint.h>
 #include <asm/cpu_ops.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 41f1c147c178..b24449da3022 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -648,9 +648,8 @@ config ATCPIT100_TIMER
 	  This option enables support for the Andestech ATCPIT100 timers.
 
 config RISCV_TIMER
-	bool "Timer for the RISC-V platform"
+	bool "Timer for the RISC-V platform" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK && RISCV
-	default y
 	select TIMER_PROBE
 	select TIMER_OF
 	help
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index 9de1dabfb126..c51c5ed15aa7 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -19,26 +19,13 @@
 #include <linux/of_irq.h>
 #include <asm/smp.h>
 #include <asm/sbi.h>
-
-u64 __iomem *riscv_time_cmp;
-u64 __iomem *riscv_time_val;
-
-static inline void mmio_set_timer(u64 val)
-{
-	void __iomem *r;
-
-	r = riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id());
-	writeq_relaxed(val, r);
-}
+#include <asm/timex.h>
 
 static int riscv_clock_next_event(unsigned long delta,
 		struct clock_event_device *ce)
 {
 	csr_set(CSR_IE, IE_TIE);
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
-		sbi_set_timer(get_cycles64() + delta);
-	else
-		mmio_set_timer(get_cycles64() + delta);
+	sbi_set_timer(get_cycles64() + delta);
 	return 0;
 }
 
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 9+ messages in thread
* [PATCH v5 4/4] dt-bindings: timer: Add CLINT bindings
  2020-07-23 14:24 [PATCH v5 0/4] Dedicated CLINT timer driver Anup Patel
                   ` (2 preceding siblings ...)
  2020-07-23 14:24 ` [PATCH v5 3/4] RISC-V: Remove CLINT related code from timer and arch Anup Patel
@ 2020-07-23 14:24 ` Anup Patel
  2020-07-23 17:08   ` Rob Herring
  3 siblings, 1 reply; 9+ messages in thread
From: Anup Patel @ 2020-07-23 14:24 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Albert Ou, Rob Herring,
	Daniel Lezcano, Thomas Gleixner
  Cc: devicetree, Damien Le Moal, Palmer Dabbelt, Emil Renner Berhing,
	Anup Patel, Anup Patel, linux-kernel, Atish Patra,
	Alistair Francis, linux-riscv

We add DT bindings documentation for CLINT device.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
---
 .../bindings/timer/sifive,clint.yaml          | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/sifive,clint.yaml

diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
new file mode 100644
index 000000000000..8ad115611860
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/sifive,clint.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Core Local Interruptor
+
+maintainers:
+  - Palmer Dabbelt <palmer@dabbelt.com>
+  - Anup Patel <anup.patel@wdc.com>
+
+description:
+  SiFive (and other RISC-V) SOCs include an implementation of the SiFive
+  Core Local Interruptor (CLINT) for M-mode timer and M-mode inter-processor
+  interrupts. It directly connects to the timer and inter-processor interrupt
+  lines of various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local
+  interrupt controller is the parent interrupt controller for CLINT device.
+  The clock frequency of CLINT is specified via "timebase-frequency" DT
+  property of "/cpus" DT node. The "timebase-frequency" DT property is
+  described in Documentation/devicetree/bindings/riscv/cpus.yaml
+
+properties:
+  compatible:
+    items:
+      - const: sifive,clint0
+      - const: sifive,fu540-c000-clint
+
+    description:
+      Should be "sifive,<chip>-clint" and "sifive,clint<version>".
+      Supported compatible strings are -
+      "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated
+      onto the SiFive FU540 chip, and "sifive,clint0" for the SiFive
+      CLINT v0 IP block with no chip integration tweaks.
+      Please refer to sifive-blocks-ip-versioning.txt for details
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+
+examples:
+  - |
+    clint@2000000 {
+      compatible = "sifive,clint0", "sifive,fu540-c000-clint";
+      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
+                             &cpu2intc 3 &cpu2intc 7
+                             &cpu3intc 3 &cpu3intc 7
+                             &cpu4intc 3 &cpu4intc 7>;
+       reg = <0x2000000 0x4000000>;
+    };
+...
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 9+ messages in thread
* Re: [PATCH v5 2/4] clocksource/drivers: Add CLINT timer driver
  2020-07-23 14:24 ` [PATCH v5 2/4] clocksource/drivers: Add CLINT timer driver Anup Patel
@ 2020-07-23 14:34   ` Daniel Lezcano
  0 siblings, 0 replies; 9+ messages in thread
From: Daniel Lezcano @ 2020-07-23 14:34 UTC (permalink / raw)
  To: Anup Patel, Palmer Dabbelt, Paul Walmsley, Albert Ou,
	Rob Herring, Thomas Gleixner
  Cc: devicetree, Damien Le Moal, Emil Renner Berhing, Anup Patel,
	linux-kernel, Atish Patra, Alistair Francis, linux-riscv

On 23/07/2020 16:24, Anup Patel wrote:
> We add a separate CLINT timer driver for Linux RISC-V M-mode (i.e.
> RISC-V NoMMU kernel).
> 
> The CLINT MMIO device provides three things:
> 1. 64bit free running counter register
> 2. 64bit per-CPU time compare registers
> 3. 32bit per-CPU inter-processor interrupt registers
> 
> Unlike other timer devices, CLINT provides IPI registers along with
> timer registers. To use CLINT IPI registers, the CLINT timer driver
> provides IPI related callbacks to arch/riscv.
> 
> Signed-off-by: Anup Patel <anup.patel@wdc.com>
> Tested-by: Emil Renner Berhing <kernel@esmil.dk>
> ---

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread
* Re: [PATCH v5 3/4] RISC-V: Remove CLINT related code from timer and arch
  2020-07-23 14:24 ` [PATCH v5 3/4] RISC-V: Remove CLINT related code from timer and arch Anup Patel
@ 2020-07-23 14:35   ` Daniel Lezcano
  0 siblings, 0 replies; 9+ messages in thread
From: Daniel Lezcano @ 2020-07-23 14:35 UTC (permalink / raw)
  To: Anup Patel, Palmer Dabbelt, Paul Walmsley, Albert Ou,
	Rob Herring, Thomas Gleixner
  Cc: devicetree, Damien Le Moal, Emil Renner Berhing, Anup Patel,
	linux-kernel, Atish Patra, Alistair Francis, linux-riscv

On 23/07/2020 16:24, Anup Patel wrote:
> Right now the RISC-V timer driver is convoluted to support:
> 1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
>    clocksource and SBI timer calls for clockevent device.
> 2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
>    counter register for clocksource and CLINT MMIO compare register
>    for clockevent device.
> 
> We now have a separate CLINT timer driver which also provide CLINT
> based IPI operations so let's remove CLINT MMIO related code from
> arch/riscv directory and RISC-V timer driver.
> 
> Signed-off-by: Anup Patel <anup.patel@wdc.com>
> Tested-by: Emil Renner Berhing <kernel@esmil.dk>
> ---

For drivers/clocksource/*

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

>  arch/riscv/Kconfig                      |  2 +-
>  arch/riscv/Kconfig.socs                 |  2 +
>  arch/riscv/configs/nommu_virt_defconfig |  7 +--
>  arch/riscv/include/asm/clint.h          | 14 ------
>  arch/riscv/include/asm/timex.h          | 28 +++--------
>  arch/riscv/kernel/Makefile              |  2 +-
>  arch/riscv/kernel/clint.c               | 63 -------------------------
>  arch/riscv/kernel/setup.c               |  2 -
>  arch/riscv/kernel/smp.c                 |  1 -
>  arch/riscv/kernel/smpboot.c             |  1 -
>  drivers/clocksource/Kconfig             |  3 +-
>  drivers/clocksource/timer-riscv.c       | 17 +------
>  12 files changed, 16 insertions(+), 126 deletions(-)
>  delete mode 100644 arch/riscv/include/asm/clint.h
>  delete mode 100644 arch/riscv/kernel/clint.c
> 
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index fedb4a72b29a..57a72ae23d10 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -74,7 +74,7 @@ config RISCV
>  	select PCI_DOMAINS_GENERIC if PCI
>  	select PCI_MSI if PCI
>  	select RISCV_INTC
> -	select RISCV_TIMER
> +	select RISCV_TIMER if RISCV_SBI
>  	select SPARSEMEM_STATIC if 32BIT
>  	select SPARSE_IRQ
>  	select SYSCTL_EXCEPTION_TRACE
> diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> index 6c88148f1b9b..8a55f6156661 100644
> --- a/arch/riscv/Kconfig.socs
> +++ b/arch/riscv/Kconfig.socs
> @@ -12,6 +12,7 @@ config SOC_SIFIVE
>  
>  config SOC_VIRT
>  	bool "QEMU Virt Machine"
> +	select CLINT_TIMER if RISCV_M_MODE
>  	select POWER_RESET
>  	select POWER_RESET_SYSCON
>  	select POWER_RESET_SYSCON_POWEROFF
> @@ -24,6 +25,7 @@ config SOC_VIRT
>  config SOC_KENDRYTE
>  	bool "Kendryte K210 SoC"
>  	depends on !MMU
> +	select CLINT_TIMER if RISCV_M_MODE
>  	select SERIAL_SIFIVE if TTY
>  	select SERIAL_SIFIVE_CONSOLE if TTY
>  	select SIFIVE_PLIC
> diff --git a/arch/riscv/configs/nommu_virt_defconfig b/arch/riscv/configs/nommu_virt_defconfig
> index cf74e179bf90..cf9388184aa3 100644
> --- a/arch/riscv/configs/nommu_virt_defconfig
> +++ b/arch/riscv/configs/nommu_virt_defconfig
> @@ -26,6 +26,7 @@ CONFIG_EXPERT=y
>  CONFIG_SLOB=y
>  # CONFIG_SLAB_MERGE_DEFAULT is not set
>  # CONFIG_MMU is not set
> +CONFIG_SOC_VIRT=y
>  CONFIG_MAXPHYSMEM_2GB=y
>  CONFIG_SMP=y
>  CONFIG_CMDLINE="root=/dev/vda rw earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0"
> @@ -48,7 +49,6 @@ CONFIG_VIRTIO_BLK=y
>  # CONFIG_SERIO is not set
>  # CONFIG_LEGACY_PTYS is not set
>  # CONFIG_LDISC_AUTOLOAD is not set
> -# CONFIG_DEVMEM is not set
>  CONFIG_SERIAL_8250=y
>  # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
>  CONFIG_SERIAL_8250_CONSOLE=y
> @@ -56,16 +56,13 @@ CONFIG_SERIAL_8250_NR_UARTS=1
>  CONFIG_SERIAL_8250_RUNTIME_UARTS=1
>  CONFIG_SERIAL_OF_PLATFORM=y
>  # CONFIG_HW_RANDOM is not set
> +# CONFIG_DEVMEM is not set
>  # CONFIG_HWMON is not set
> -# CONFIG_LCD_CLASS_DEVICE is not set
> -# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
>  # CONFIG_VGA_CONSOLE is not set
>  # CONFIG_HID is not set
>  # CONFIG_USB_SUPPORT is not set
>  CONFIG_VIRTIO_MMIO=y
>  CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
> -CONFIG_SIFIVE_PLIC=y
> -# CONFIG_VALIDATE_FS_PARSER is not set
>  CONFIG_EXT2_FS=y
>  # CONFIG_DNOTIFY is not set
>  # CONFIG_INOTIFY_USER is not set
> diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
> deleted file mode 100644
> index adaba98a7d6c..000000000000
> --- a/arch/riscv/include/asm/clint.h
> +++ /dev/null
> @@ -1,14 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef _ASM_RISCV_CLINT_H
> -#define _ASM_RISCV_CLINT_H 1
> -
> -#include <linux/io.h>
> -#include <linux/smp.h>
> -
> -#ifdef CONFIG_RISCV_M_MODE
> -void clint_init_boot_cpu(void);
> -#else /* CONFIG_RISCV_M_MODE */
> -#define clint_init_boot_cpu()	do { } while (0)
> -#endif /* CONFIG_RISCV_M_MODE */
> -
> -#endif /* _ASM_RISCV_CLINT_H */
> diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
> index bad2a7c2cda5..a3fb85d505d4 100644
> --- a/arch/riscv/include/asm/timex.h
> +++ b/arch/riscv/include/asm/timex.h
> @@ -7,41 +7,27 @@
>  #define _ASM_RISCV_TIMEX_H
>  
>  #include <asm/csr.h>
> -#include <asm/mmio.h>
>  
>  typedef unsigned long cycles_t;
>  
> -extern u64 __iomem *riscv_time_val;
> -extern u64 __iomem *riscv_time_cmp;
> -
> -#ifdef CONFIG_64BIT
> -#define mmio_get_cycles()	readq_relaxed(riscv_time_val)
> -#else
> -#define mmio_get_cycles()	readl_relaxed(riscv_time_val)
> -#define mmio_get_cycles_hi()	readl_relaxed(((u32 *)riscv_time_val) + 1)
> -#endif
> -
>  static inline cycles_t get_cycles(void)
>  {
> -	if (IS_ENABLED(CONFIG_RISCV_SBI))
> -		return csr_read(CSR_TIME);
> -	return mmio_get_cycles();
> +	return csr_read(CSR_TIME);
>  }
>  #define get_cycles get_cycles
>  
> +static inline u32 get_cycles_hi(void)
> +{
> +	return csr_read(CSR_TIMEH);
> +}
> +#define get_cycles_hi get_cycles_hi
> +
>  #ifdef CONFIG_64BIT
>  static inline u64 get_cycles64(void)
>  {
>  	return get_cycles();
>  }
>  #else /* CONFIG_64BIT */
> -static inline u32 get_cycles_hi(void)
> -{
> -	if (IS_ENABLED(CONFIG_RISCV_SBI))
> -		return csr_read(CSR_TIMEH);
> -	return mmio_get_cycles_hi();
> -}
> -
>  static inline u64 get_cycles64(void)
>  {
>  	u32 hi, lo;
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index b355cf485671..7edf15643146 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile
> @@ -31,7 +31,7 @@ obj-y	+= cacheinfo.o
>  obj-y	+= patch.o
>  obj-$(CONFIG_MMU) += vdso.o vdso/
>  
> -obj-$(CONFIG_RISCV_M_MODE)	+= clint.o traps_misaligned.o
> +obj-$(CONFIG_RISCV_M_MODE)	+= traps_misaligned.o
>  obj-$(CONFIG_FPU)		+= fpu.o
>  obj-$(CONFIG_SMP)		+= smpboot.o
>  obj-$(CONFIG_SMP)		+= smp.o
> diff --git a/arch/riscv/kernel/clint.c b/arch/riscv/kernel/clint.c
> deleted file mode 100644
> index a9845ee023e2..000000000000
> --- a/arch/riscv/kernel/clint.c
> +++ /dev/null
> @@ -1,63 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Copyright (c) 2019 Christoph Hellwig.
> - */
> -
> -#include <linux/io.h>
> -#include <linux/of_address.h>
> -#include <linux/smp.h>
> -#include <linux/types.h>
> -#include <asm/clint.h>
> -#include <asm/csr.h>
> -#include <asm/timex.h>
> -
> -/*
> - * This is the layout used by the SiFive clint, which is also shared by the qemu
> - * virt platform, and the Kendryte KD210 at least.
> - */
> -#define CLINT_IPI_OFF		0
> -#define CLINT_TIME_CMP_OFF	0x4000
> -#define CLINT_TIME_VAL_OFF	0xbff8
> -
> -u32 __iomem *clint_ipi_base;
> -
> -static void clint_send_ipi(const struct cpumask *target)
> -{
> -	unsigned int cpu;
> -
> -	for_each_cpu(cpu, target)
> -		writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
> -}
> -
> -static void clint_clear_ipi(void)
> -{
> -	writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
> -}
> -
> -static struct riscv_ipi_ops clint_ipi_ops = {
> -	.ipi_inject = clint_send_ipi,
> -	.ipi_clear = clint_clear_ipi,
> -};
> -
> -void clint_init_boot_cpu(void)
> -{
> -	struct device_node *np;
> -	void __iomem *base;
> -
> -	np = of_find_compatible_node(NULL, NULL, "riscv,clint0");
> -	if (!np) {
> -		panic("clint not found");
> -		return;
> -	}
> -
> -	base = of_iomap(np, 0);
> -	if (!base)
> -		panic("could not map CLINT");
> -
> -	clint_ipi_base = base + CLINT_IPI_OFF;
> -	riscv_time_cmp = base + CLINT_TIME_CMP_OFF;
> -	riscv_time_val = base + CLINT_TIME_VAL_OFF;
> -
> -	clint_clear_ipi();
> -	riscv_set_ipi_ops(&clint_ipi_ops);
> -}
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index f04373be54a6..2c6dd329312b 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -18,7 +18,6 @@
>  #include <linux/swiotlb.h>
>  #include <linux/smp.h>
>  
> -#include <asm/clint.h>
>  #include <asm/cpu_ops.h>
>  #include <asm/setup.h>
>  #include <asm/sections.h>
> @@ -79,7 +78,6 @@ void __init setup_arch(char **cmdline_p)
>  #else
>  	unflatten_device_tree();
>  #endif
> -	clint_init_boot_cpu();
>  
>  #ifdef CONFIG_SWIOTLB
>  	swiotlb_init(1);
> diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
> index 8b85683ce203..07626be78c23 100644
> --- a/arch/riscv/kernel/smp.c
> +++ b/arch/riscv/kernel/smp.c
> @@ -17,7 +17,6 @@
>  #include <linux/seq_file.h>
>  #include <linux/delay.h>
>  
> -#include <asm/clint.h>
>  #include <asm/sbi.h>
>  #include <asm/tlbflush.h>
>  #include <asm/cacheflush.h>
> diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
> index 5fe849791bf0..a6cfa9842d4b 100644
> --- a/arch/riscv/kernel/smpboot.c
> +++ b/arch/riscv/kernel/smpboot.c
> @@ -24,7 +24,6 @@
>  #include <linux/of.h>
>  #include <linux/sched/task_stack.h>
>  #include <linux/sched/mm.h>
> -#include <asm/clint.h>
>  #include <asm/cpu_ops.h>
>  #include <asm/irq.h>
>  #include <asm/mmu_context.h>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 41f1c147c178..b24449da3022 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -648,9 +648,8 @@ config ATCPIT100_TIMER
>  	  This option enables support for the Andestech ATCPIT100 timers.
>  
>  config RISCV_TIMER
> -	bool "Timer for the RISC-V platform"
> +	bool "Timer for the RISC-V platform" if COMPILE_TEST
>  	depends on GENERIC_SCHED_CLOCK && RISCV
> -	default y
>  	select TIMER_PROBE
>  	select TIMER_OF
>  	help
> diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
> index 9de1dabfb126..c51c5ed15aa7 100644
> --- a/drivers/clocksource/timer-riscv.c
> +++ b/drivers/clocksource/timer-riscv.c
> @@ -19,26 +19,13 @@
>  #include <linux/of_irq.h>
>  #include <asm/smp.h>
>  #include <asm/sbi.h>
> -
> -u64 __iomem *riscv_time_cmp;
> -u64 __iomem *riscv_time_val;
> -
> -static inline void mmio_set_timer(u64 val)
> -{
> -	void __iomem *r;
> -
> -	r = riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id());
> -	writeq_relaxed(val, r);
> -}
> +#include <asm/timex.h>
>  
>  static int riscv_clock_next_event(unsigned long delta,
>  		struct clock_event_device *ce)
>  {
>  	csr_set(CSR_IE, IE_TIE);
> -	if (IS_ENABLED(CONFIG_RISCV_SBI))
> -		sbi_set_timer(get_cycles64() + delta);
> -	else
> -		mmio_set_timer(get_cycles64() + delta);
> +	sbi_set_timer(get_cycles64() + delta);
>  	return 0;
>  }
>  
> 


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread
* Re: [PATCH v5 4/4] dt-bindings: timer: Add CLINT bindings
  2020-07-23 14:24 ` [PATCH v5 4/4] dt-bindings: timer: Add CLINT bindings Anup Patel
@ 2020-07-23 17:08   ` Rob Herring
  2020-07-24  2:55     ` Anup Patel
  0 siblings, 1 reply; 9+ messages in thread
From: Rob Herring @ 2020-07-23 17:08 UTC (permalink / raw)
  To: Anup Patel
  Cc: devicetree, Damien Le Moal, Albert Ou, Emil Renner Berhing,
	Anup Patel, Daniel Lezcano, linux-kernel, Atish Patra,
	Palmer Dabbelt, Paul Walmsley, Palmer Dabbelt, Alistair Francis,
	Thomas Gleixner, linux-riscv

On Thu, Jul 23, 2020 at 07:54:09PM +0530, Anup Patel wrote:
> We add DT bindings documentation for CLINT device.
> 
> Signed-off-by: Anup Patel <anup.patel@wdc.com>
> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
> Tested-by: Emil Renner Berhing <kernel@esmil.dk>
> ---
>  .../bindings/timer/sifive,clint.yaml          | 58 +++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/sifive,clint.yaml
> 
> diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> new file mode 100644
> index 000000000000..8ad115611860
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/sifive,clint.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SiFive Core Local Interruptor
> +
> +maintainers:
> +  - Palmer Dabbelt <palmer@dabbelt.com>
> +  - Anup Patel <anup.patel@wdc.com>
> +
> +description:
> +  SiFive (and other RISC-V) SOCs include an implementation of the SiFive
> +  Core Local Interruptor (CLINT) for M-mode timer and M-mode inter-processor
> +  interrupts. It directly connects to the timer and inter-processor interrupt
> +  lines of various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local
> +  interrupt controller is the parent interrupt controller for CLINT device.
> +  The clock frequency of CLINT is specified via "timebase-frequency" DT
> +  property of "/cpus" DT node. The "timebase-frequency" DT property is
> +  described in Documentation/devicetree/bindings/riscv/cpus.yaml
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: sifive,clint0
> +      - const: sifive,fu540-c000-clint

Wrong order. Most specific goes first.

> +
> +    description:
> +      Should be "sifive,<chip>-clint" and "sifive,clint<version>".
> +      Supported compatible strings are -
> +      "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated
> +      onto the SiFive FU540 chip, and "sifive,clint0" for the SiFive
> +      CLINT v0 IP block with no chip integration tweaks.
> +      Please refer to sifive-blocks-ip-versioning.txt for details
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts-extended:
> +    minItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts-extended

Add:

additionalProperties: false

> +
> +examples:
> +  - |
> +    clint@2000000 {

timer@...

> +      compatible = "sifive,clint0", "sifive,fu540-c000-clint";
> +      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
> +                             &cpu2intc 3 &cpu2intc 7
> +                             &cpu3intc 3 &cpu3intc 7
> +                             &cpu4intc 3 &cpu4intc 7>;
> +       reg = <0x2000000 0x4000000>;

64MB of register space? Doesn't matter much for 64-bit, but would waste 
lots of virtual space (low mem) on 32-bit.

> +    };
> +...
> -- 
> 2.25.1
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread
* Re: [PATCH v5 4/4] dt-bindings: timer: Add CLINT bindings
  2020-07-23 17:08   ` Rob Herring
@ 2020-07-24  2:55     ` Anup Patel
  0 siblings, 0 replies; 9+ messages in thread
From: Anup Patel @ 2020-07-24  2:55 UTC (permalink / raw)
  To: Rob Herring
  Cc: devicetree, Damien Le Moal, Daniel Lezcano, Emil Renner Berhing,
	Anup Patel, linux-kernel@vger.kernel.org List, Atish Patra,
	Albert Ou, Palmer Dabbelt, Paul Walmsley, Palmer Dabbelt,
	Alistair Francis, Thomas Gleixner, linux-riscv

On Thu, Jul 23, 2020 at 10:38 PM Rob Herring <robh@kernel.org> wrote:
>
> On Thu, Jul 23, 2020 at 07:54:09PM +0530, Anup Patel wrote:
> > We add DT bindings documentation for CLINT device.
> >
> > Signed-off-by: Anup Patel <anup.patel@wdc.com>
> > Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
> > Tested-by: Emil Renner Berhing <kernel@esmil.dk>
> > ---
> >  .../bindings/timer/sifive,clint.yaml          | 58 +++++++++++++++++++
> >  1 file changed, 58 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/timer/sifive,clint.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> > new file mode 100644
> > index 000000000000..8ad115611860
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> > @@ -0,0 +1,58 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/timer/sifive,clint.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: SiFive Core Local Interruptor
> > +
> > +maintainers:
> > +  - Palmer Dabbelt <palmer@dabbelt.com>
> > +  - Anup Patel <anup.patel@wdc.com>
> > +
> > +description:
> > +  SiFive (and other RISC-V) SOCs include an implementation of the SiFive
> > +  Core Local Interruptor (CLINT) for M-mode timer and M-mode inter-processor
> > +  interrupts. It directly connects to the timer and inter-processor interrupt
> > +  lines of various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local
> > +  interrupt controller is the parent interrupt controller for CLINT device.
> > +  The clock frequency of CLINT is specified via "timebase-frequency" DT
> > +  property of "/cpus" DT node. The "timebase-frequency" DT property is
> > +  described in Documentation/devicetree/bindings/riscv/cpus.yaml
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: sifive,clint0
> > +      - const: sifive,fu540-c000-clint
>
> Wrong order. Most specific goes first.

Okay, will update.

>
> > +
> > +    description:
> > +      Should be "sifive,<chip>-clint" and "sifive,clint<version>".
> > +      Supported compatible strings are -
> > +      "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated
> > +      onto the SiFive FU540 chip, and "sifive,clint0" for the SiFive
> > +      CLINT v0 IP block with no chip integration tweaks.
> > +      Please refer to sifive-blocks-ip-versioning.txt for details
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts-extended:
> > +    minItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts-extended
>
> Add:
>
> additionalProperties: false

Okay, will add.

>
> > +
> > +examples:
> > +  - |
> > +    clint@2000000 {
>
> timer@...

Okay, will rename.

>
> > +      compatible = "sifive,clint0", "sifive,fu540-c000-clint";
> > +      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
> > +                             &cpu2intc 3 &cpu2intc 7
> > +                             &cpu3intc 3 &cpu3intc 7
> > +                             &cpu4intc 3 &cpu4intc 7>;
> > +       reg = <0x2000000 0x4000000>;
>
> 64MB of register space? Doesn't matter much for 64-bit, but would waste
> lots of virtual space (low mem) on 32-bit.

This is a typo. The register space size is 64KB not 64MB. I will update.

>
> > +    };
> > +...
> > --
> > 2.25.1
> >

Regards,
Anup

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-07-24  2:56 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-23 14:24 [PATCH v5 0/4] Dedicated CLINT timer driver Anup Patel
2020-07-23 14:24 ` [PATCH v5 1/4] RISC-V: Add mechanism to provide custom IPI operations Anup Patel
2020-07-23 14:24 ` [PATCH v5 2/4] clocksource/drivers: Add CLINT timer driver Anup Patel
2020-07-23 14:34   ` Daniel Lezcano
2020-07-23 14:24 ` [PATCH v5 3/4] RISC-V: Remove CLINT related code from timer and arch Anup Patel
2020-07-23 14:35   ` Daniel Lezcano
2020-07-23 14:24 ` [PATCH v5 4/4] dt-bindings: timer: Add CLINT bindings Anup Patel
2020-07-23 17:08   ` Rob Herring
2020-07-24  2:55     ` Anup Patel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).