From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-usb@vger.kernel.org,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Sam Ravnborg <sam@ravnborg.org>,
linux-pwm@vger.kernel.org, linux-iio@vger.kernel.org,
Viresh Kumar <vireshk@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-pci@vger.kernel.org, dri-devel@lists.freedesktop.org,
Sebastian Reichel <sre@kernel.org>,
linux-ide@vger.kernel.org,
Thierry Reding <thierry.reding@gmail.com>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Pavel Machek <pavel@ucw.cz>,
Miquel Raynal <miquel.raynal@bootlin.com>,
linux-riscv@lists.infradead.org, Lee Jones <lee.jones@linaro.org>,
linux-clk@vger.kernel.org, linux-leds@vger.kernel.org,
Vignesh Raghavendra <vigneshr@ti.com>,
linux-rtc@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>,
Marc Zyngier <maz@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
linux-serial@vger.kernel.org, linux-input@vger.kernel.org,
Jakub Kicinski <kuba@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
linux-mips@vger.kernel.org,
Vivien Didelot <vivien.didelot@gmail.com>,
Wolfgang Grandegger <wg@grandegger.com>,
linux-media@vger.kernel.org, linux-hwmon@vger.kernel.org,
Albert Ou <aou@eecs.berkeley.edu>,
Jason Cooper <jason@lakedaemon.net>,
linux-pm@vger.kernel.org, linux-can@vger.kernel.org,
linux-gpio@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Paul Walmsley <paul.walmsley@sifive.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-arm-kernel@lists.infradead.org,
Jens Axboe <axboe@kernel.dk>,
Alessandro Zummo <a.zummo@towertech.it>,
linux-watchdog@vger.kernel.org,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-mmc@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
linux-spi@vger.kernel.org, linux-i2c@vger.kernel.org,
Vinod Koul <vkoul@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Richard Weinberger <richard@nod.at>,
dmaengine@vger.kernel.org, linux-mtd@lists.infradead.org,
"David S. Miller" <davem@davemloft.net>,
Jonathan Cameron <jic23@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>
Subject: [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
Date: Mon, 5 Oct 2020 13:38:28 -0500 [thread overview]
Message-ID: <20201005183830.486085-3-robh@kernel.org> (raw)
In-Reply-To: <20201005183830.486085-1-robh@kernel.org>
In cases where we don't reference another schema, 'additionalProperties'
can be used instead. This is preferred for now as 'unevaluatedProperties'
support isn't implemented yet.
In a few cases, this means adding some missing property definitions of
which most are for SPI bus properties. 'unevaluatedProperties' is not going
to work for the SPI bus properties anyways as they are evaluated from the
parent node, not the SPI child node.
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/clock/baikal,bt1-ccu-div.yaml | 6 +++++-
.../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +-
.../devicetree/bindings/clock/imx8m-clock.yaml | 2 +-
.../devicetree/bindings/hwmon/baikal,bt1-pvt.yaml | 4 ++--
.../devicetree/bindings/iio/accel/adi,adis16240.yaml | 4 +++-
.../devicetree/bindings/iio/accel/adi,adxl345.yaml | 4 +++-
.../devicetree/bindings/iio/accel/adi,adxl372.yaml | 4 +++-
.../devicetree/bindings/iio/adc/adi,ad7124.yaml | 4 +++-
.../devicetree/bindings/iio/adc/adi,ad7192.yaml | 4 +++-
.../devicetree/bindings/iio/adc/adi,ad7292.yaml | 4 +++-
.../devicetree/bindings/iio/adc/adi,ad7606.yaml | 6 +++++-
.../devicetree/bindings/iio/adc/adi,ad7923.yaml | 4 +++-
.../devicetree/bindings/iio/adc/maxim,max1241.yaml | 4 +++-
.../devicetree/bindings/iio/dac/adi,ad5770r.yaml | 10 +++++++++-
.../devicetree/bindings/iio/frequency/adf4371.yaml | 4 +++-
.../devicetree/bindings/iio/imu/adi,adis16460.yaml | 4 +++-
.../devicetree/bindings/iio/imu/adi,adis16475.yaml | 2 +-
.../devicetree/bindings/iio/imu/bosch,bmi160.yaml | 4 +++-
.../devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 4 +++-
.../bindings/interrupt-controller/mti,gic.yaml | 2 +-
.../devicetree/bindings/mfd/cirrus,lochnagar.yaml | 10 +++++++++-
.../bindings/mfd/ti,j721e-system-controller.yaml | 5 ++++-
.../devicetree/bindings/misc/olpc,xo1.75-ec.yaml | 4 +++-
.../opp/allwinner,sun50i-h6-operating-points.yaml | 4 +++-
.../bindings/regulator/qcom-labibb-regulator.yaml | 2 +-
.../devicetree/bindings/timer/snps,dw-apb-timer.yaml | 2 +-
26 files changed, 82 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
index 2821425ee445..bd4cefbb1244 100644
--- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
@@ -134,7 +134,11 @@ properties:
"#reset-cells":
const: 1
-unevaluatedProperties: false
+ clocks: true
+
+ clock-names: true
+
+additionalProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
index 97131bfa6f87..624984d51c10 100644
--- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -101,7 +101,7 @@ properties:
clock-names:
const: ref_clk
-unevaluatedProperties: false
+additionalProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
index 31e7cc9693c3..625f573a7b90 100644
--- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -96,7 +96,7 @@ allOf:
- const: clk_ext3
- const: clk_ext4
-unevaluatedProperties: false
+additionalProperties: false
examples:
# Clock Control Module node:
diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
index 84ae4cdd08ed..00a6511354e6 100644
--- a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
+++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
@@ -79,7 +79,7 @@ properties:
minimum: 0
maximum: 7130
-unevaluatedProperties: false
+additionalProperties: false
required:
- compatible
@@ -99,7 +99,7 @@ examples:
interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>;
- baikal,pvt-temp-trim-millicelsius = <1000>;
+ baikal,pvt-temp-offset-millicelsius = <1000>;
clocks = <&ccu_sys>, <&ccu_sys>;
clock-names = "ref", "pclk";
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index 8589b722028d..4fcbfd93e218 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -25,12 +25,14 @@ properties:
interrupts:
maxItems: 1
+ spi-max-frequency: true
+
required:
- compatible
- reg
- interrupts
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 591ca32181b0..11d32a288535 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -32,6 +32,8 @@ properties:
spi-cpol: true
+ spi-max-frequency: true
+
interrupts:
maxItems: 1
@@ -40,7 +42,7 @@ required:
- reg
- interrupts
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 64f275c8e2d9..38b59b6454ce 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -25,12 +25,14 @@ properties:
interrupts:
maxItems: 1
+ spi-max-frequency: true
+
required:
- compatible
- reg
- interrupts
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index d0d2880626c2..f1c574c896cb 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -52,6 +52,8 @@ properties:
avdd-supply:
description: avdd supply can be used as reference for conversion.
+ spi-max-frequency: true
+
required:
- compatible
- reg
@@ -108,7 +110,7 @@ patternProperties:
- reg
- diff-channels
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index ed363a796e50..e0cc3b2e8957 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -30,6 +30,8 @@ properties:
spi-cpha: true
+ spi-max-frequency: true
+
clocks:
maxItems: 1
description: phandle to the master clock (mclk)
@@ -92,7 +94,7 @@ required:
- spi-cpol
- spi-cpha
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index 55e973c6449c..108d202b288f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -30,6 +30,8 @@ properties:
spi-cpha: true
+ spi-max-frequency: true
+
'#address-cells':
const: 1
@@ -63,7 +65,7 @@ patternProperties:
required:
- reg
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 014b020ed0c2..73775174cf57 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -31,6 +31,10 @@ properties:
spi-cpha: true
+ spi-cpol: true
+
+ spi-max-frequency: true
+
avcc-supply: true
interrupts:
@@ -102,7 +106,7 @@ required:
- interrupts
- adi,conversion-start-gpios
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
index 2a17641faed5..e82194974eea 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
@@ -43,11 +43,13 @@ properties:
'#size-cells':
const: 0
+ spi-max-frequency: true
+
required:
- compatible
- reg
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index 181213b862db..4c7e0d94bff1 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -39,13 +39,15 @@ properties:
thus enabling power-down mode.
maxItems: 1
+ spi-max-frequency: true
+
required:
- compatible
- reg
- vdd-supply
- vref-supply
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index faef288b7148..fb2c48fc7ce4 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -49,6 +49,14 @@ properties:
asserted during driver probe.
maxItems: 1
+ spi-max-frequency: true
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
channel@0:
description: Represents an external channel which are
connected to the DAC. Channel 0 can act both as a current
@@ -130,7 +138,7 @@ required:
- channel@4
- channel@5
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 11d445f7010e..6b3a611e1cf1 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -40,13 +40,15 @@ properties:
output stage will shut down until the ADF4371/ADF4372 achieves lock as
measured by the digital lock detect circuitry.
+ spi-max-frequency: true
+
required:
- compatible
- reg
- clocks
- clock-names
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 07c8ed4ee0f1..340be256f283 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -25,6 +25,8 @@ properties:
spi-cpol: true
+ spi-max-frequency: true
+
interrupts:
maxItems: 1
@@ -33,7 +35,7 @@ required:
- reg
- interrupts
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
index c29385697bbf..79fba1508e89 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -116,7 +116,7 @@ allOf:
dependencies:
adi,sync-mode: [ clocks ]
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index 4f215399c8df..6e73cd889b5c 100644
--- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -46,11 +46,13 @@ properties:
mount-matrix:
description: an optional 3x3 mounting rotation matrix
+ spi-max-frequency: true
+
required:
- compatible
- reg
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 716731c2b794..479e7065d4eb 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -36,11 +36,13 @@ properties:
drive-open-drain:
type: boolean
+ spi-max-frequency: true
+
required:
- compatible
- reg
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
index ce6aaff15214..039e08af98bb 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
@@ -95,7 +95,7 @@ properties:
additionalProperties: false
-unevaluatedProperties: false
+additionalProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
index 7a616577ac63..c00ad3e21c21 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
@@ -130,6 +130,14 @@ properties:
type: object
$ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
+ lochnagar-hwmon:
+ type: object
+ $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+ lochnagar-sc:
+ type: object
+ $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
VDDCORE:
description:
Initialisation data for the VDDCORE regulator, which supplies the
@@ -249,7 +257,7 @@ required:
- lochnagar-clk
- lochnagar-pinctrl
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index da3d9ab758b9..19fcf59fd2fe 100644
--- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -30,6 +30,9 @@ properties:
- const: syscon
- const: simple-mfd
+ reg:
+ maxItems: 1
+
"#address-cells":
const: 1
@@ -54,7 +57,7 @@ required:
- "#size-cells"
- ranges
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
index e75d77beec6a..ade733cd60f7 100644
--- a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
+++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
@@ -28,11 +28,13 @@ properties:
description: GPIO uspecifier of the CMD pin
maxItems: 1
+ spi-cpha: true
+
required:
- compatible
- cmd-gpios
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
index aef87a33a7c9..aeff2bd774dd 100644
--- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
+++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -31,6 +31,8 @@ properties:
Documentation/devicetree/bindings/nvmem/nvmem.txt and also
examples below.
+ opp-shared: true
+
required:
- compatible
- nvmem-cells
@@ -53,7 +55,7 @@ patternProperties:
unevaluatedProperties: false
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
index fb111e2d5b99..53853ec20fe2 100644
--- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -47,7 +47,7 @@ properties:
required:
- compatible
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
index 7b39e3204fb3..2fc617377e2c 100644
--- a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
@@ -45,7 +45,7 @@ properties:
frequency in HZ, but is defined only for the backwards compatibility
with the picoxcell platform.
-unevaluatedProperties: false
+additionalProperties: false
required:
- compatible
--
2.25.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2020-10-05 18:39 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-05 18:38 [PATCH 0/4] dt-bindings: additional/unevaluatedProperties clean-ups Rob Herring
2020-10-05 18:38 ` [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties' Rob Herring
2020-10-05 20:01 ` Mark Brown
2020-10-05 20:29 ` Wolfram Sang
2020-10-05 20:31 ` Krzysztof Kozlowski
2020-10-06 5:29 ` Vinod Koul
2020-10-06 7:37 ` Geert Uytterhoeven
2020-10-06 9:12 ` Ulf Hansson
2020-10-06 14:33 ` Guenter Roeck
2020-10-06 16:57 ` Mathieu Poirier
2020-10-07 1:03 ` Dmitry Torokhov
2020-10-07 22:48 ` Alexandre Belloni
2020-10-05 18:38 ` Rob Herring [this message]
2020-10-05 20:02 ` [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties' Mark Brown
2020-10-05 20:33 ` Krzysztof Kozlowski
2020-10-06 6:59 ` Lee Jones
2020-10-06 9:58 ` Jonathan Cameron
2020-10-06 14:32 ` Guenter Roeck
2020-10-05 18:38 ` [PATCH 3/4] dt-bindings: Explicitly allow additional properties in board/SoC schemas Rob Herring
2020-10-05 20:34 ` Krzysztof Kozlowski
2020-10-06 5:42 ` Viresh Kumar
2020-10-06 7:42 ` Geert Uytterhoeven
2020-10-05 18:38 ` [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas Rob Herring
2020-10-05 20:04 ` Mark Brown
2020-10-05 20:35 ` Krzysztof Kozlowski
2020-10-05 20:55 ` Sebastian Reichel
2020-10-06 1:23 ` Chanwoo Choi
2020-10-06 5:30 ` Vinod Koul
2020-10-06 6:58 ` Lee Jones
2020-10-06 7:43 ` Geert Uytterhoeven
2020-10-06 8:22 ` Srinivas Kandagatla
2020-10-06 9:12 ` Ulf Hansson
2020-10-06 10:00 ` Jonathan Cameron
2020-10-06 14:30 ` Guenter Roeck
2020-10-07 1:04 ` Dmitry Torokhov
2020-10-07 22:40 ` Alexandre Belloni
2020-10-06 8:25 ` [PATCH 0/4] dt-bindings: additional/unevaluatedProperties clean-ups Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201005183830.486085-3-robh@kernel.org \
--to=robh@kernel.org \
--cc=a.zummo@towertech.it \
--cc=andrew@lunn.ch \
--cc=aou@eecs.berkeley.edu \
--cc=axboe@kernel.dk \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=daniel.lezcano@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=hkallweit1@gmail.com \
--cc=jason@lakedaemon.net \
--cc=jic23@kernel.org \
--cc=krzk@kernel.org \
--cc=kuba@kernel.org \
--cc=lars@metafoo.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=maz@kernel.org \
--cc=mchehab@kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=mkl@pengutronix.de \
--cc=myungjoo.ham@samsung.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=pavel@ucw.cz \
--cc=pmeerw@pmeerw.net \
--cc=richard@nod.at \
--cc=rui.zhang@intel.com \
--cc=sam@ravnborg.org \
--cc=sboyd@kernel.org \
--cc=sre@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=tsbogend@alpha.franken.de \
--cc=ulf.hansson@linaro.org \
--cc=vigneshr@ti.com \
--cc=vireshk@kernel.org \
--cc=vivien.didelot@gmail.com \
--cc=vkoul@kernel.org \
--cc=wg@grandegger.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).