[PATCH v1 4/4] riscv: dts: sifive unmatched: Add PWM controlled LEDs

From: Emil Renner Berthing <emil.renner.berthing@canonical.com>
To: linux-kernel@vger.kernel.org
Cc: Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Vincent Pelletier <plr.vincent@gmail.com>,
	Bin Meng <bin.meng@windriver.com>,
	Aurelien Jarno <aurelien@aurel32.net>,
	Ron Economos <w6rz@comcast.net>,
	Qiu Wenbo <qiuwenbo@kylinos.com.cn>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Stephen L Arnold <nerdboy@gentoo.org>,
	Jianlong Huang <jianlong.huang@starfivetech.com>,
	Mark Kettenis <kettenis@openbsd.org>,
	Sven Schwermer <sven.schwermer@disruptive-technologies.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	David Abdurachmanov <davidlt@rivosinc.com>,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-riscv@lists.infradead.org
Subject: [PATCH v1 4/4] riscv: dts: sifive unmatched: Add PWM controlled LEDs
Date: Tue,  5 Jul 2022 23:01:43 +0200	[thread overview]
Message-ID: <20220705210143.315151-5-emil.renner.berthing@canonical.com> (raw)
In-Reply-To: <20220705210143.315151-1-emil.renner.berthing@canonical.com>

This adds the two PWM controlled LEDs to the HiFive Unmatched device
tree. D12 is just a regular green diode, but D2 is an RGB diode with 3
PWM inputs controlling the three different colours.

Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
---
 .../boot/dts/sifive/hifive-unmatched-a00.dts  | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index c4ed9efdff03..beaefe74755a 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -4,6 +4,8 @@
 #include "fu740-c000.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
 
 /* Clock frequency (in Hz) of the PCB crystal for rtcclk */
 #define RTCCLK_FREQ		1000000
@@ -44,6 +46,46 @@ gpio-poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-d12 {
+			pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d12";
+		};
+	};
+
+	led-controller-2 {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			max-brightness = <255>;
+			label = "d2";
+
+			led-red {
+				pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led-green {
+				pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led-blue {
+				pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
 };
 
 &uart0 {
-- 
2.37.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
