From: Rob Herring <robh@kernel.org>
To: Damien Le Moal <damien.lemoal@wdc.com>,
Lee Jones <lee@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Benson Leung <bleung@chromium.org>,
Guenter Roeck <groeck@chromium.org>,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, chrome-platform@lists.linux.dev,
linux-arm-msm@vger.kernel.org, patches@opensource.cirrus.com
Subject: [PATCH] dt-bindings: mfd: Drop unneeded quotes
Date: Wed, 22 Mar 2023 12:35:18 -0500 [thread overview]
Message-ID: <20230322173519.3971434-1-robh@kernel.org> (raw)
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../bindings/mfd/canaan,k210-sysctl.yaml | 6 ++---
.../bindings/mfd/google,cros-ec.yaml | 22 +++++++++----------
.../mfd/hisilicon,hi6421-spmi-pmic.yaml | 2 +-
.../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 2 +-
.../bindings/mfd/rohm,bd71815-pmic.yaml | 2 +-
.../bindings/mfd/rohm,bd71828-pmic.yaml | 2 +-
.../devicetree/bindings/mfd/wlf,arizona.yaml | 2 +-
.../bindings/mfd/x-powers,ac100.yaml | 4 ++--
.../bindings/mfd/xylon,logicvc.yaml | 4 ++--
9 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
index e2046f07a40e..8459d3642205 100644
--- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
@@ -36,7 +36,7 @@ properties:
clock-controller:
# Child node
type: object
- $ref: "../clock/canaan,k210-clk.yaml"
+ $ref: ../clock/canaan,k210-clk.yaml
description:
Clock controller for the SoC clocks. This child node definition
should follow the bindings specified in
@@ -45,7 +45,7 @@ properties:
reset-controller:
# Child node
type: object
- $ref: "../reset/canaan,k210-rst.yaml"
+ $ref: ../reset/canaan,k210-rst.yaml
description:
Reset controller for the SoC. This child node definition
should follow the bindings specified in
@@ -54,7 +54,7 @@ properties:
syscon-reboot:
# Child node
type: object
- $ref: "../power/reset/syscon-reboot.yaml"
+ $ref: ../power/reset/syscon-reboot.yaml
description:
Reboot method for the SoC. This child node definition
should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index cdf1d719efe9..456465e35114 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -65,7 +65,7 @@ properties:
ARM Cortex M4 Co-processor. Contains the name of the rpmsg
device. Used to match the subnode to the rpmsg device announced by
the SCP.
- $ref: "/schemas/types.yaml#/definitions/string"
+ $ref: /schemas/types.yaml#/definitions/string
spi-max-frequency: true
@@ -94,23 +94,23 @@ properties:
const: 0
typec:
- $ref: "/schemas/chrome/google,cros-ec-typec.yaml#"
+ $ref: /schemas/chrome/google,cros-ec-typec.yaml#
ec-pwm:
- $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+ $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
deprecated: true
pwm:
- $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+ $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
kbd-led-backlight:
- $ref: "/schemas/chrome/google,cros-kbd-led-backlight.yaml#"
+ $ref: /schemas/chrome/google,cros-kbd-led-backlight.yaml#
keyboard-controller:
- $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
+ $ref: /schemas/input/google,cros-ec-keyb.yaml#
proximity:
- $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#"
+ $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
codecs:
type: object
@@ -126,7 +126,7 @@ properties:
patternProperties:
"^ec-codec@[a-f0-9]+$":
type: object
- $ref: "/schemas/sound/google,cros-ec-codec.yaml#"
+ $ref: /schemas/sound/google,cros-ec-codec.yaml#
required:
- "#address-cells"
@@ -151,15 +151,15 @@ properties:
patternProperties:
"^i2c-tunnel[0-9]*$":
type: object
- $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#"
+ $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
"^regulator@[0-9]+$":
type: object
- $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#"
+ $ref: /schemas/regulator/google,cros-ec-regulator.yaml#
"^extcon[0-9]*$":
type: object
- $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#"
+ $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml#
required:
- compatible
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
index 22edcb4b212f..bdff5b653453 100644
--- a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -53,7 +53,7 @@ properties:
'^ldo[0-9]+$':
type: object
- $ref: "/schemas/regulator/regulator.yaml#"
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
index 9acad9d326eb..9c51c1b19067 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -49,7 +49,7 @@ patternProperties:
"rtc@[0-9a-f]+$":
type: object
- $ref: "../rtc/qcom-pm8xxx-rtc.yaml"
+ $ref: ../rtc/qcom-pm8xxx-rtc.yaml
required:
- compatible
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
index d6d120a78094..05747e012516 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -46,7 +46,7 @@ properties:
rohm,clkout-open-drain:
description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index ec3adcd3483d..11089aa89ec6 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -46,7 +46,7 @@ properties:
rohm,clkout-open-drain:
description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
index ea3337dafaf5..7902f3c5d289 100644
--- a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
@@ -156,7 +156,7 @@ properties:
entry has a value that is out of range for a 16 bit register then the
chip default will be used. If present exactly five values must be
specified.
- $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 5
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
index 309606d2d806..f3d8394b27e7 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: X-Powers AC100
diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
index 9efd49c39bd2..6e880a46d7ee 100644
--- a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
+++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 Bootlin
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xylon LogiCVC multi-function device
--
2.39.2
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2023-03-22 17:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-22 17:35 Rob Herring [this message]
2023-03-22 23:39 ` [PATCH] dt-bindings: mfd: Drop unneeded quotes Damien Le Moal
2023-03-23 7:31 ` Krzysztof Kozlowski
2023-03-30 12:42 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230322173519.3971434-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bleung@chromium.org \
--cc=chrome-platform@lists.linux.dev \
--cc=damien.lemoal@wdc.com \
--cc=devicetree@vger.kernel.org \
--cc=groeck@chromium.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mchehab+huawei@kernel.org \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).