archive mirror
 help / color / mirror / Atom feed
From: Jisheng Zhang <>
To: Srinivas Kandagatla <>,
	Rob Herring <>,
	Krzysztof Kozlowski <>,
	Conor Dooley <>
Cc:,,, Chao Wei <>,
	Chen Wang <>
Subject: [PATCH 0/2] nvmem: Add Sophgo eFuse driver
Date: Sun, 19 Nov 2023 21:13:30 +0800	[thread overview]
Message-ID: <> (raw)

Sophgo SoCs such as CV1800B contain eFuses used to store
factory-programmed data such as calibration values for the built-in
ethernet PHY.

As for CV1800B, HW automatically loads the eFuse content into CONTENT
base registers which are organized as 32bit values exposed as MMIO.

Currently, add read support for the eFuse. This is a preparation step
for supporting the built-in ethernet phy.

Since the clk support isn't mainlined, so cv1800b DT patches are not

Jisheng Zhang (2):
  dt-bindings: nvmem: Add sophgo,efuses
  nvmem: Add Sophgo eFuse driver

 .../bindings/nvmem/sophgo,efuse.yaml          | 54 +++++++++++
 drivers/nvmem/Kconfig                         | 13 +++
 drivers/nvmem/Makefile                        |  2 +
 drivers/nvmem/sophgo-efuse.c                  | 97 +++++++++++++++++++
 4 files changed, 166 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/sophgo,efuse.yaml
 create mode 100644 drivers/nvmem/sophgo-efuse.c


linux-riscv mailing list

             reply	other threads:[~2023-11-19 13:26 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-19 13:13 Jisheng Zhang [this message]
2023-11-19 13:13 ` [PATCH 1/2] dt-bindings: nvmem: Add sophgo,efuses Jisheng Zhang
2023-11-20 10:42   ` Krzysztof Kozlowski
2023-11-27 18:24   ` Rob Herring
2023-11-19 13:13 ` [PATCH 2/2] nvmem: Add Sophgo eFuse driver Jisheng Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).